WORKS Exhaust System - Development

[86_ZN6]

Dyno run video

enjoy!

[ame]http://youtu.be/Fhy2X0RIq1E[/ame]

[silverbullet]

Just put my ABM on and unfortunately it has the same issue with the left tip being noticeably higher. Nothing a little torch and hammer work on the hangers wont fix but where this is happening with the AB and ABM Works might want to modify their jigs a bit. Otherwise I'm very happy with it. Literally sounds stock cruising on the highway and has absolutely no drone at any RPM but gets good and growly when you step on it :happy0180:

[86_ZN6]

Originally Posted by silverbullet

Just put my ABM on and unfortunately it has the same issue with the left tip being noticeably higher. Nothing a little torch and hammer work on the hangers wont fix but where this is happening with the AB and ABM Works might want to modify their jigs a bit. Otherwise I'm very happy with it. Literally sounds stock cruising on the highway and has absolutely no drone at any RPM but gets good and growly when you step on it :happy0180:

thanks for the review! but ours is pretty even on both of the cars we have here. you need to mess with it a little more to make the tips even


im glad you liked the exhaust!

[silverbullet]

Originally Posted by 86_ZN6

thanks for the review! but ours is pretty even on both of the cars we have here. you need to mess with it a little more to make the tips even


im glad you liked the exhaust!

My time was pretty limited today to get the exhaust on so I didnt fool around with it too much, but if I can get them level by messing with it and re-tightening I'll post the results so the exhaust can get the credit it deserves

[invisage]

So being patient here but how close to price and availability?

[86_ZN6]

Originally Posted by invisage

So being patient here but how close to price and availability?

catback has been out for months already ---> http://www.ft86club.com/forums/showthread.php?t=25738

[invisage]

Originally Posted by 86_ZN6

catback has been out for months already ---> http://www.ft86club.com/forums/showthread.php?t=25738

You know I want more than just the catback

[86_ZN6]

Originally Posted by invisage

You know I want more than just the catback

Catless front pipe will be priced at $199.

The over pipe is still under going development

[invisage]

Originally Posted by 86_ZN6

Catless front pipe will be priced at $199.

The over pipe is still under going development

So very close can't be far off the full system? Any chance of a group buy?

[mad_sb]

Originally Posted by 86_ZN6

left side

as you can see the flow is not direct



right side

I have to say I would have preferred the left tip just be there for looks with no hole drilled into the primary pipe. I see absolutely no reason for that design, it is certainly not going to improve the power and may even introduce turbulence. I could be wrong though so if there is evidence to the contrary i would like to see it.

Further, if they had just made it a cosmetic tip, they could offer the system as a single exit (on the USDM passanger side) option that saves $40.

[clayrush]

DYNO NUMBERS
With and without tune!!!!!!!!!!!!!!!!!!

J/K just waiting on over pipe. Hope all is goin well.

[GT 86 Brah]

mines still never came in it was shipped on the 6th i think



edit: it is in! will install it today since it was too dark yesterday

[86_ZN6]

Originally Posted by mad_sb

I have to say I would have preferred the left tip just be there for looks with no hole drilled into the primary pipe. I see absolutely no reason for that design, it is certainly not going to improve the power and may even introduce turbulence. I could be wrong though so if there is evidence to the contrary i would like to see it.

Further, if they had just made it a cosmetic tip, they could offer the system as a single exit (on the USDM passanger side) option that saves $40.

i really dont know about the design, but it works and functions. haha!

I think most muffler deletes have this by pass design.

We are not going to make a single exit one since another company is making them already.

Originally Posted by clayrush

DYNO NUMBERS
With and without tune!!!!!!!!!!!!!!!!!!

J/K just waiting on over pipe. Hope all is goin well.

very soon buddy! thanks! :happy0180:

Originally Posted by GT 86 Brah

mines still never came in it was shipped on the 6th i think

PM me your details so i can look into it

Originally Posted by invisage

So very close can't be far off the full system? Any chance of a group buy?

sure! a group buy to Australia can be arranged

[Cadenz]

Can those with the misaligned tips post pictures? I was close to pulling the trigger on an ABM but now I'm curious about any potential problems. Thanks!