Mid-Atlantic Chat Thread

[civicdrivr]

Originally Posted by xjohnx

I'm not sure it was this one, he just got it on Friday, I believe. Unloaded two ov his vipers to buy it.

Hmmm, i need to stop posting when I'm half asleep. The one I saw was black. Derp.

Originally Posted by xjohnx

Does it go away when you put light pressure on the window switch bezel (the patterned trim piece around the window switch)? If so, it's a pretty easy fix. Pop the door card off, put some dynamat on the switch, reinstall.

The majority of the rattle on mine seemed to be coming from the power mirror knob portion of that panel (drivers side), but i put in on the window switch controls too for good measure.

Note to self - buy Dynamat.

Sent from my Nexus 4

[TyperRspec789]

@_F-R-S_

+1 on the Injen intake. But the Perrin tube with K&N drop-in filter is a good setup as well. Some people who bought the Injen experienced bogging. But I didn't and Rhiannon (who now has mine) didn't experience the bogging. Both of us love it.

Why are you looking into an intake when you're planning to boost?

[Marcoscrdo]

Originally Posted by TyperRspec789

@_F-R-S_

+1 on the Injen intake. But the Perrin tube with K&N drop-in filter is a good setup as well. Some people who bought the Injen experienced bogging. But I didn't and Rhiannon (who now has mine) didn't experience the bogging. Both of us love it.

Why are you looking into an intake when you're planning to boost?

Bogging ? I want that intake so just wondering

[IloveBaldEagles]

I have the Injen intake and I'm not experiencing any bogging. Only a sexy sound whenever I hit on the gas pedal.

[DC-FRS]

Same here. No bogging from my Injen. Sounds absolutely amazing. Changes sound of the car completely. Which is funny bc it's just the intake.

[TyperRspec789]

It's because it hits VTEC yo

[BoostinIX]

Missed my first C&C in a while. Was busy doin car things :P




Favorite pic eveeeeeeeeeeer.


Byebye rubber, hello Heim.





Anyone needs some fabrication/welding/cages, hit me up. I know the man to do it :P

[xjohnx]

Originally Posted by civicdrivr

Note to self - buy Dynamat.

Sent from my Nexus 4

I bought a "speaker kit" of it at Best Buy for $25. It came in 2 ~10x10" sheets. I used maybe 2 square inches of it. I've got plenty left over, if you want some just say the word.

[BoostinIX]

[OrbitalEllipses]

Originally Posted by xjohnx

Does it go away when you put light pressure on the window switch bezel (the patterned trim piece around the window switch)? If so, it's a pretty easy fix. Pop the door card off, put some dynamat on the switch, reinstall.

No idea, I can't exactly safely reach the passenger door panel while driving. It happens intermittently and I can't tell if it's the music or not. Only some songs, but all the songs are relatively similar EDM type things.

[Areddi]

Originally Posted by Pure Automotive

All intakes have roughly the same gains in my opinion, but they change the power band and sound. The Perrin inlet pipe is 3" and smooth inside vs the stock pipe which is 2.7" and ribbed for her pleasure. Perrin pipe + k&n costs less than most full intake setups and does the same.

This is the setup that I'm running. Here's a pic of mine:

[xjohnx]

Originally Posted by OrbitalEllipses

No idea, I can't exactly safely reach the passenger door panel while driving. It happens intermittently and I can't tell if it's the music or not. Only some songs, but all the songs are relatively similar EDM type things.

I noticed mine was most prominent while listening to AM sports radio where the speaker has a somewhat deep voice. Next time you have a passenger in the car have them try to put a little pressure on that panel, if it goes away, it's a pretty easy fix, took me about an hour (taking my time).

[xjohnx]

Originally Posted by Areddi

This is the setup that I'm running. Here's a pic of mine:

How much of a difference did just the inlet tube make? I've already got the K&N panel filter.

[Darryljr11]

Originally Posted by xjohnx

I bought a "speaker kit" of it at Best Buy for $25. It came in 2 ~10x10" sheets. I used maybe 2 square inches of it. I've got plenty left over, if you want some just say the word.

I want some!!