Official San Antonio , TX Thread!! - Page 141 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Ricepuddin · 02-08-2013, 11:37 PM

Quote:

Originally Posted by johatan25

Do headers!!! I wanna hear them in person!!!

Even if I do, they'll be a little ways out. I am waiting on Nameless to finish their design

Ranatsu · 02-09-2013, 01:40 AM

Quote:

Originally Posted by Ricepuddin

Ha sorry man you're going to have to wait a weekend!

Also what do you and @aaronosaurus think of this? http://www.ft86club.com/forums/showthread.php?t=28320

I have money set aside for headers, but I may dip into into it for this.

Well they have a great kit, but you could put it all together if you built it yourself for much cheaper.

I would love to buy that but I don't think we are going to be seeing super high oil temps with just doing autox.

johatan25 · 02-09-2013, 02:59 AM

Ordered

MmmDieselFumes · 02-09-2013, 11:28 AM

Quote:

Originally Posted by tripjammer

Cool I want to know what it looks like with the brake light on in the day and night from the back...some tints I have seen you can see the rear brake light too well.

Sorry, forgot to post this yesterday for ya.

Sent from my EVO using Tapatalk 2

Ricepuddin · 02-09-2013, 11:37 AM

Quote:

Originally Posted by Ranatsu

Well they have a great kit, but you could put it all together if you built it yourself for much cheaper.

I would love to buy that but I don't think we are going to be seeing super high oil temps with just doing autox.

I recall Perrin posting on how they noticed power loss in the car just doing dyno runs.

It looks pretty simple,I am going to have to see how much cores and lines cost now that you mention that.

Hell this is much cheaper
http://www.blisswebsolution.com/serv...oil-cooler-kit

tuckdaddy · 02-09-2013, 01:32 PM

finally put orange bulbs in the side marker the other day!

tripjammer · 02-09-2013, 01:51 PM

Quote:

Originally Posted by MmmDieselFumes

Sorry, forgot to post this yesterday for ya.

Sent from my EVO using Tapatalk 2

U got a pic with the rear brake light on?

Thanks bro!

Extreme86 · 02-09-2013, 03:03 PM

Quote:

Originally Posted by johatan25

@Extreme86
So I looked into the Perrin intake inlet and I liked it better than getting an intake (plus the price is great) and much better than the tubular maze mess of our intake. Also ordered Perrin drop in filter!

Thanks, Kevin @Enjuku Racing

@johatan25 You won't be disappointed with this approach on the intake!!! After installing the Perrin silicone intake tube with OEM airbox and GREEN drop-in this past week, am extremely impressed with the improvement in performance over the Airaid setup!!!! Avg. mpg is down by .5 from before (now 30.2) but, having so much fun with acceleration now heavy right foot is probably the reason why...and, maybe the stop and go parking lot I encountered on IH35 the other day. BRZ definitely faster and more responsive...hard to resist driving aggressively.

Removed the "attachments" to the stock intake snorkel by drilling out the rivets (made it easier to put snorkel back under the nose and added two holes for xtra air to enter).

Also added a 1.5" hole for increased airflow/less restriction to the box and make mo sucking sound under the hood!!! Props to @Ricepuddin for the heads up on the Airaid issues!! Much happier since removing it...might plant some ivy in it or sell it on ebay!

tripjammer · 02-09-2013, 06:02 PM

A fellow FT86'er parked next to me yesterday at work...whodat?

Dynotronics1 · 02-09-2013, 07:31 PM

Quote:

Originally Posted by Ricepuddin

Even if I do, they'll be a little ways out. I am waiting on Nameless to finish their design

No, that's no the set you want. Hint hint......

blunova · 02-09-2013, 07:36 PM

Who's the blue BRZ that parked behind me at Home Depot today??

Ranatsu · 02-09-2013, 09:29 PM

Quote:

Originally Posted by Ricepuddin

I recall Perrin posting on how they noticed power loss in the car just doing dyno runs.

It looks pretty simple,I am going to have to see how much cores and lines cost now that you mention that.

Hell this is much cheaper
http://www.blisswebsolution.com/serv...oil-cooler-kit

another good thing about the Perrin unit is that it has a thermostat built into the sandwich adapter.

Ricepuddin · 02-09-2013, 09:51 PM

Quote:

Originally Posted by Dynotronics1

No, that's no the set you want. Hint hint......

Jason is a friend of mine so I have at least see what he has to offer first. Are the PPEs out yet?

Quote:

Originally Posted by Ranatsu

another good thing about the Perrin unit is that it has a thermostat built into the sandwich adapter.

That is true. The Mishimoto has a thermostat option, but I am not sure where it goes

Dynotronics1 · 02-10-2013, 05:01 PM

ok, you guys did a great job rounding up folks for this gb.

So heres the deal for ya; I have to go to CA on a tuning trip on the 22. So between now and then I'm going to offer a one file deal to the SA/AU folks for 400.00$ If you want a cable set up, you can get you very own for 310.00$ But if there are enough of yall around each other, I would suggest you share.

This is a one time deal. Single 93 oct file, tuned to your car, in your choise of map positions. Stock map loaded in a different position for you. I will also set whatever RR features you like. For example;

stock mode 1
93 oct map mode 2
93 oct with FFS mode 3
93 oct with AB/FFS/LC mode 4

I'll take all comers from the Texas area until I head out the door on the 22nd.

And yes, I dyno sheets are on the way. I just have to finish this silly mazda 3 first, since its been bolted to the dyno for 3 weeks testing

02-09-2013, 02:59 AM	#1963
johatan25 Senior Member Join Date: Oct 2012 Drives: Lightning Red BRZ - Premium 6MT Location: San Antonio Posts: 189 Thanks: 73 Thanked 78 Times in 61 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Ordered __________________ Mods done (RED), Mods to come(BLACK): LED Swap, GReddy SP Elite Exhaust, Leather Seats, TSW 18x8.5 + 235/35, MOTIV Over & Catless Test pipe, EcuTek 93 Octane tune, PERRIN Lightweight Pulley, PERRIN Intake Inlet + drop-in filter,, e85 fuel map, 5axis Spoiler?, Borla UEL Headers?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official What are you listening to thread?	TRDMAN	Off-Topic Lounge [WARNING: NO POLITICS]	2332	12-24-2024 11:16 PM
Official FT-86 Specs / Info Thread	Hachiroku	Scion FR-S / Toyota 86 GT86 General Forum	203	09-09-2019 11:43 PM
The official hand drawn thread.	LexusFman	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	12	04-06-2013 06:11 AM
Official 2011 WRC Season Thread	4agze	Other Vehicles & General Automotive Discussions	4	04-01-2011 05:13 PM
Official MMA Thread	zigzagz94	Off-Topic Lounge [WARNING: NO POLITICS]	11	12-15-2009 11:59 PM

02-10-2013, 05:01 PM	#1974
Dynotronics1 Join Date: Nov 2012 Drives: 2013 BRZ Location: New braunfels Posts: 223 Thanks: 2 Thanked 102 Times in 76 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	ok, you guys did a great job rounding up folks for this gb. So heres the deal for ya; I have to go to CA on a tuning trip on the 22. So between now and then I'm going to offer a one file deal to the SA/AU folks for 400.00$ If you want a cable set up, you can get you very own for 310.00$ But if there are enough of yall around each other, I would suggest you share. This is a one time deal. Single 93 oct file, tuned to your car, in your choise of map positions. Stock map loaded in a different position for you. I will also set whatever RR features you like. For example; stock mode 1 93 oct map mode 2 93 oct with FFS mode 3 93 oct with AB/FFS/LC mode 4 I'll take all comers from the Texas area until I head out the door on the 22nd. And yes, I dyno sheets are on the way. I just have to finish this silly mazda 3 first, since its been bolted to the dyno for 3 weeks testing

User Name		Remember Me?
Password