White drl and keep highs

[chappys4life]

I would like to get white drl lights without giving up highs. Whats a solution?

[Chen]

Hids I think would be your only option. But they take time to warm up. A couple seconds or so.

[Khánh]

retrofit Bixenon projectors into you lows

[abutterman]

Originally Posted by Khánh

retrofit Bixenon projectors into you lows

Any idea where to get parts or guides on how to do that? I was just thinking and a great approach would be to have the bixenons, and switch the drls and the turn signals so that the turn signal is in the headlamp enclosure, and the bottom lights are drls. That plus some fogs would look much cleaner overall. wonder if it could be done

[Cade01]

Originally Posted by abutterman

Any idea where to get parts or guides on how to do that?

I plan on getting the Morimoto Retro-quick set up from http://www.theretrofitsource.com/

[abutterman]

Originally Posted by Cade01

I plan on getting the Morimoto Retro-quick set up from http://www.theretrofitsource.com/

not a bad price at all. Is it just a matter of pulling the high beam wire out of the stock harness and moving it over to the low beam harness? Wiring always makes me nervous lol

[Cade01]

Originally Posted by abutterman

not a bad price at all. Is it just a matter of pulling the high beam wire out of the stock harness and moving it over to the low beam harness? Wiring always makes me nervous lol

There is a DIY thread all about the install in the DIY section.