FR-S BESPOKE Harness - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Blake · 01-28-2013, 01:52 PM

I know this has been posted somehwere before, but I can't find where. I ordered a Boyo backup camera but need to know where I can buy the proper harness, so I can use the BESPOKE radio screen to display for my back up camera. Does anyone know what harness I need, or where I can get it???

SVXdc · 01-29-2013, 05:04 PM

Two FRS owners with the BeSpoke just received harnesses I sent them. I'd like to hear confirmation from them that everything goes OK, but I'm all but certain that my harness will work without any problems.

The BeSpoke needs a 16-pin plug with the camera RCA jack on pins 8 (signal) and 16 (ground/shield). It does not need anything on pin 15 (just another ground). Since your car has no factory 16-pin harness, you don't need the parking brake signal (pin 6), but I can include a wire for that, if you want to experiment with video playback and adding video to the aux input.

You'll also need to add a wire to the factory 28-pin harness with the reverse gear signal (which your car's harness lacks).

Also see this post.

Blake · 01-31-2013, 07:49 PM

Quote:

Originally Posted by SVXdc

Two FRS owners with the BeSpoke just received harnesses I sent them. I'd like to hear confirmation from them that everything goes OK, but I'm all but certain that my harness will work without any problems.

The BeSpoke needs a 16-pin plug with the camera RCA jack on pins 8 (signal) and 16 (ground/shield). It does not need anything on pin 15 (just another ground). Since your car has no factory 16-pin harness, you don't need the parking brake signal (pin 6), but I can include a wire for that, if you want to experiment with video playback and adding video to the aux input.

You'll also need to add a wire to the factory 28-pin harness with the reverse gear signal (which your car's harness lacks).

Also see this post.

Great, let me know if it works. If so let me know what I need to do to order one from you. I already have the back up camera, just need to install it.

lbroskee · 01-31-2013, 08:09 PM

Quote:

Originally Posted by SVXdc

Two FRS owners with the BeSpoke just received harnesses I sent them. I'd like to hear confirmation from them that everything goes OK, but I'm all but certain that my harness will work without any problems.

The BeSpoke needs a 16-pin plug with the camera RCA jack on pins 8 (signal) and 16 (ground/shield). It does not need anything on pin 15 (just another ground). Since your car has no factory 16-pin harness, you don't need the parking brake signal (pin 6), but I can include a wire for that, if you want to experiment with video playback and adding video to the aux input.

You'll also need to add a wire to the factory 28-pin harness with the reverse gear signal (which your car's harness lacks).

Also see this post.

Any chance for a bespoke DIY?

Blake · 02-04-2013, 05:48 PM

If you could point me in the direction of getting the harness that would be great. I have a BOYO VTL400SR. Just need the harness to hook it up to the BeSpoke.

01-28-2013, 01:52 PM	#1
Blake Member Join Date: Aug 2012 Drives: Ravin Scion FR-S Location: Houston, Texas Posts: 87 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	FR-S BESPOKE Harness I know this has been posted somehwere before, but I can't find where. I ordered a Boyo backup camera but need to know where I can buy the proper harness, so I can use the BESPOKE radio screen to display for my back up camera. Does anyone know what harness I need, or where I can get it???

01-29-2013, 05:04 PM	#2
SVXdc Radio wiring harness guru Join Date: Jun 2012 Drives: 1996 SVX L AWD Location: Atlanta Posts: 156 Thanks: 59 Thanked 98 Times in 47 Posts Mentioned: 23 Post(s) Tagged: 0 Thread(s)	Two FRS owners with the BeSpoke just received harnesses I sent them. I'd like to hear confirmation from them that everything goes OK, but I'm all but certain that my harness will work without any problems. The BeSpoke needs a 16-pin plug with the camera RCA jack on pins 8 (signal) and 16 (ground/shield). It does not need anything on pin 15 (just another ground). Since your car has no factory 16-pin harness, you don't need the parking brake signal (pin 6), but I can include a wire for that, if you want to experiment with video playback and adding video to the aux input. You'll also need to add a wire to the factory 28-pin harness with the reverse gear signal (which your car's harness lacks). Also see this post. __________________ David C. Useful Subaru pin-outs and other info Last edited by SVXdc; 01-29-2013 at 11:29 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Essex Harness Bar: Now Available!	JRitt	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	16	02-26-2018 10:15 AM
Harness Bar	diirk	Tracking / Autocross / HPDE / Drifting	38	07-21-2017 02:15 PM
Essex Harness Bar: Now Available!	JRitt	Tracking / Autocross / HPDE / Drifting	23	03-04-2013 01:36 PM
Lighting Harness	wawro569	Cosmetic Modification (Interior/Exterior/Lighting)	0	09-09-2012 12:28 PM
ECU Extension Harness available	Ishii Motors	Engine, Exhaust, Bolt-Ons	2	06-07-2012 04:20 PM

02-04-2013, 05:48 PM	#5
Blake Member Join Date: Aug 2012 Drives: Ravin Scion FR-S Location: Houston, Texas Posts: 87 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	If you could point me in the direction of getting the harness that would be great. I have a BOYO VTL400SR. Just need the harness to hook it up to the BeSpoke.

User Name		Remember Me?
Password