Unofficial - CEL/SL/Idle Issue List for FR-S/BRZ Owners - Page 176 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

MVJ1975 · 01-29-2013, 10:35 PM

Good question. I'd assume it's an 810 as it's never been changed.

Marrk · 01-30-2013, 11:50 AM

Quote:

Originally Posted by MVJ1975

Update - they swapped the valves and the same error popped right back up. Now they're replacing a cam gear. Current ETA is early next week.

"swapped the valves" ? I'm not sure what this means, nor do I recall seeing anything about swapping valves in this thread. Maybe I missed something (?).

Could you explain?

Thanks.

Yruyur · 01-30-2013, 12:01 PM

Most likely swapped sensors to see if its a cam sensor issue like they did on mine.

Sent from my SCH-I535 using Tapatalk 2

Marrk · 01-30-2013, 12:03 PM

^^Okay. Swapping sensors I understand. Thanks.

xfire0384 · 01-30-2013, 10:38 PM

xfire0384, Scion FR-S, 5,400 miles, 7078XX, 1 day - repaired, CA, USA

They scanned the ECM and got error code P0019 - Cam Sensor Correlation.
They reflashed the ECM and it seems to have fixed the issue.

Talked with the Service Consultant and he said he had seen a number of FR-S come through and in all cases the reflash or replacing the ECM has fixed the problem.

Here's hoping...

jrodz09 · 01-30-2013, 11:47 PM

Damn! Just got my BRZ on Thursday.. See what surprises await. :/ Currently at 680mi. Have experienced a rough shake when completely stopped. Is that the start to this problem?

acro · 01-31-2013, 12:32 AM

So i got the flash today.

No more idle issues no more CEL

Car runs smooth as butter. This is the way it should have come

U can count me as case solved

xfire0384 · 01-31-2013, 11:11 AM

Quote:

Originally Posted by jrodz09

Damn! Just got my BRZ on Thursday.. See what surprises await. :/ Currently at 680mi. Have experienced a rough shake when completely stopped. Is that the start to this problem?

That is what I had just before my FR-S gave me the CEL/SL lights. Think it was about a month for me from the first rough idle to that.

Marrk · 01-31-2013, 01:26 PM

Quote:

Originally Posted by jrodz09

Damn! Just got my BRZ on Thursday.. See what surprises await. :/ Currently at 680mi. Have experienced a rough shake when completely stopped. Is that the start to this problem?

What's you VIN, bro?

jupillam · 01-31-2013, 10:46 PM

Have my frs checked in at the dealer for CEL. They will keep my car for couple of days to drive it to regenerate the code again. Hope to get my car back soon.

tuckdaddy · 01-31-2013, 11:32 PM

Tuckdaddy number 209 now around 9,000 miles and still kicking strong!

jrodz09 · 01-31-2013, 11:51 PM

Quote:

Originally Posted by Marrk

What's you VIN, bro?

6055XX.. Hope my made it clear from all those major problems..

BRZnut · 02-01-2013, 12:34 AM

Quote:

Originally Posted by jrodz09

605554.. Hope my made it clear from all those major problems..

The problems should have been fixed for you at the factory...keep us posted on the rough idle.

foxhu · 02-01-2013, 01:02 AM

Went in for the ECM recall(01/31) for about 10 min and everything is set hopefully the light doesn't come on XD

01-30-2013, 12:01 PM	#2453
Yruyur Senior Member Join Date: Jun 2012 Drives: Scion fr-s asphalt M/T Location: Phoenix, AZ Posts: 4,192 Thanks: 1,416 Thanked 1,631 Times in 941 Posts Mentioned: 96 Post(s) Tagged: 0 Thread(s)	Most likely swapped sensors to see if its a cam sensor issue like they did on mine. Sent from my SCH-I535 using Tapatalk 2 __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NW Owner List & Event Archive	DarrenDriven	Northwest	1643	08-05-2016 07:48 PM
Idle issue?	yayforaddison	Issues \| Warranty \| Recalls / TSB	891	07-14-2016 11:42 AM
Idle issue	scioneric	CANADA	23	08-24-2012 02:40 AM
Idle issue poll/role call	Hawaiian	Scion FR-S / Toyota 86 GT86 General Forum	8	06-13-2012 01:00 PM
An unofficial message from TMCA	Courtz1074	AUSTRALIA	25	05-17-2012 11:00 AM

01-30-2013, 12:03 PM	#2454
Marrk Senior Member Join Date: Jul 2011 Drives: Honda Fit Location: Los Angeles Posts: 1,004 Thanks: 722 Thanked 125 Times in 90 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	^^Okay. Swapping sensors I understand. Thanks.

01-30-2013, 10:38 PM	#2455
xfire0384 Junior Member Join Date: Jan 2013 Drives: RIP 2013 Scion FR-S Location: USA Posts: 2 Thanks: 0 Thanked 2 Times in 1 Post Mentioned: 0 Post(s) Tagged: 0 Thread(s)	xfire0384, Scion FR-S, 5,400 miles, 7078XX, 1 day - repaired, CA, USA They scanned the ECM and got error code P0019 - Cam Sensor Correlation. They reflashed the ECM and it seems to have fixed the issue. Talked with the Service Consultant and he said he had seen a number of FR-S come through and in all cases the reflash or replacing the ECM has fixed the problem. Here's hoping...

01-31-2013, 12:32 AM	#2457
acro Senior Member Join Date: Nov 2011 Drives: GT-86 Location: Northern hemisphere Posts: 360 Thanks: 419 Thanked 102 Times in 69 Posts Mentioned: 0 Post(s) Tagged: 1 Thread(s)	So i got the flash today. No more idle issues no more CEL Car runs smooth as butter. This is the way it should have come U can count me as case solved

01-31-2013, 10:46 PM	#2460
jupillam Senior Member Join Date: Aug 2012 Drives: White out Scion Frs Location: Socal Posts: 305 Thanks: 48 Thanked 56 Times in 37 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Have my frs checked in at the dealer for CEL. They will keep my car for couple of days to drive it to regenerate the code again. Hope to get my car back soon.

02-01-2013, 01:02 AM	#2464
foxhu Member Join Date: Jan 2013 Drives: BRZ Location: United States Posts: 62 Thanks: 1 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Went in for the ECM recall(01/31) for about 10 min and everything is set hopefully the light doesn't come on XD

User Name		Remember Me?
Password