Evasive Motorsports Project BR-Z officially starts now!!!

[Acree]

What are the measurements and offsets of the wheels?

Do you have a dual exit exhaust?

-Acree

[gmookher]

is the new motor in the car yet?

[OrbitalEllipses]

Originally Posted by ChaChas345

Where is the inner liner you speak of sorry im a big noob when it comes to dropping cars.

Plastic wheel well liner that keeps stuff from going where it doesn't need to be. In the front you can see these from the engine bay; black plastic humps right above the fenders. We don't actually have metal wheel wells in the front like most cars. If you removes these in the front, you would SEE the wheel.

[chenshuo]

won't the new motor make the nose of the car super heavy?

[Evasive Motorsports]

We are not putting a new motor. There just happen to be a ISF motor right next to it.

-Randy

[Evasive Motorsports]

Originally Posted by Acree

What are the measurements and offsets of the wheels?

Do you have a dual exit exhaust?

-Acree

18x9.5 +40

[shu5892001]

any sound clip of the exhaust?

[ChaChas345]

Originally Posted by OrbitalEllipses

Plastic wheel well liner that keeps stuff from going where it doesn't need to be. In the front you can see these from the engine bay; black plastic humps right above the fenders. We don't actually have metal wheel wells in the front like most cars. If you removes these in the front, you would SEE the wheel.

Would their be any cons of having this done? Or would only a part of it be cut so their shouldnt be any worry. I would love to drop my car down a lot but worry about rubbing too much.

[OrbitalEllipses]

Originally Posted by ChaChas345

Would their be any cons of having this done? Or would only a part of it be cut so their shouldnt be any worry. I would love to drop my car down a lot but worry about rubbing too much.

Never been low enough to need to cut liners. Usually you're shaving a bit off the side that meets the outer edge of the fender so it isn't a problem. You don't want to get entirely rid of them; crap gets places it shouldn't be.

[Evasive Motorsports]

Originally Posted by shu5892001

any sound clip of the exhaust?

[Evasive Motorsports]

Originally Posted by OrbitalEllipses

Never been low enough to need to cut liners. Usually you're shaving a bit off the side that meets the outer edge of the fender so it isn't a problem. You don't want to get entirely rid of them; crap gets places it shouldn't be.

[Evasive Motorsports]

We will be doing initial testing on EVS BRZ this weekend at Buttonwillow Raceway. Car is lightly modified with Tein Super Racing Coilover, Rays 57Xtreme, Advan AD08, EVS Tuning 70mm front pipe / single exit exhausts and Voltex Type 1S wing. — with Rob Walker.

[SnapOv3st3r]

Looks sexy..

[Evasive Motorsports]

Originally Posted by SnapOv3st3r

Looks sexy..