Invidia Q300 - VIDEOS and Installed Photos * FT-86 SpeedFactory does it again! *

[FT-86 SpeedFactory]

Originally Posted by Craig

Going catless, is there a downside other than environmental conerns? Is there an O2 sensor behind the second cat that would throw a code?

That catless price is INSANE and I cannot turn it down O.o

There is no O2 sensor after the header so a catless front pipe will not throw any codes. There are no sensors to detect it.

[Craig]

Originally Posted by FT-86 SpeedFactory

There is no O2 sensor after the header so a catless front pipe will not throw any codes. There are no sensors to detect it.

Thanks a lot, you'll be hearing from me shortly. Xmas gift to myself ^_____^

[FT-86 SpeedFactory]

Originally Posted by Craig

Thanks a lot, you'll be hearing from me shortly. Xmas gift to myself ^_____^

No problem. I was enjoying the Q300 and Invidia catless on our car. But now with snow and salt on the ground it's hiding inside.

Hopefully it clears up in a few days want to get E85 loaded and do some dyno pulls with it.

[ToytoyTT]

Do the videos on this thread include the Catless front pipe or is it just the Q300 catback?

Interested to hear what the q300 + catless front pipe sounds like.

[Alphalfa86]

I recently bought the Invidia q300 cat back and perrin drop in filter for my frs. I had a few questions after my purchase and was amazed with the kindness and fast response i got from Jermey at Ft86speedfactory. Not to mention I got a sweet suprise from them with my order. Highly recommend any purchase through them. The exhaust and filter have seemed to smooth out how the car runs. The exhaust has a good note thats not overly loud. Have a video of a few free revs but cant figure out how to get it from
My phone to here

[FT-86 SpeedFactory]

Appreciate the support guys. Without it we would not be able to continue to provide videos and photos of all the exciting FRS/BRZ parts that are coming out.

We have more coming soon of the Q300 with some other goodies installed like the Borla UEL header.

[Dipstik-sportech]

Just got back from my first longish highway trip (Duluth, MN)with the q300. Perfect! Zero drone, loud enough when you get on it. Overall very pleased with this system and as always with the service provided by FT86speedfactory.

[TRD_86]

The Q300 has similar design like the Greddy elite sp. The gain could be very little around 2hp~3hp and the price is same as around under $600. Now which one has better deep sound Q300 vs Greddy Elite ?

[FT-86 SpeedFactory]

Originally Posted by TRD_86

The Q300 has similar design like the Greddy elite sp. The gain could be very little around 2hp~3hp and the price is same as around under $600. Now which one has better deep sound Q300 vs Greddy Elite ?

The Greddy Elite, well I was told to not say anything if I can't say anything nice but..... All you get is the axle back with the Elite.

The Q300 gets you larger diameter piping from the front pipe all the way back.

With that being said both are similar in sound and products we stock.

I'd go Q300 for the $$$.

[be6sti]

Originally Posted by FT-86 SpeedFactory

The Greddy Elite, well I was told to not say anything if I can't say anything nice but..... All you get is the axle back with the Elite.

The Q300 gets you larger diameter piping from the front pipe all the way back.

With that being said both are similar in sound and products we stock.

I'd go Q300 for the $$$.

I thought your q300 sounded pretty good


Sent from my iPhone using Tapatalk

[TRD_86]

Originally Posted by FT-86 SpeedFactory

The Greddy Elite, well I was told to not say anything if I can't say anything nice but..... All you get is the axle back with the Elite.

The Q300 gets you larger diameter piping from the front pipe all the way back.

With that being said both are similar in sound and products we stock.

I'd go Q300 for the $$$.

Do you know how many HP gain for Q300 catback vs Greddy elite (~3hp) ?

[be6sti]

Originally Posted by FT-86 SpeedFactory

Sorry we don't have that data. We will have it on our Exhaust system the V1 once all portions are completed.

We're running the Q300 right now with Invidia Catless front pipe and aFe intake.

Our baseline back in August was 158WHP, the Dyno run with the Q300, Invidia catless front pipe and aFe was 173WHP.

Invidia does not make an overpipe at this time.

This post might help answer your question trd 86


Sent from my iPhone using Tapatalk

[jflogerzi]

Question, the catless front pipe won't cause any cels correct? The main one is in the headers? Being CA I know its illegal to remove any cat, but on new cars its six years before it needs to be smog. What do you guys think?

[FT-86 SpeedFactory]

Originally Posted by jflogerzi

Question, the catless front pipe won't cause any cels correct? The main one is in the headers? Being CA I know its illegal to remove any cat, but on new cars its six years before it needs to be smog. What do you guys think?

You are correct. No CEL for removing the cat on the front pipe. We have been running the catless front pipe with no CEL issues. The header is where the O2 sensor gets it reading.

Also, you can always keep that stock front pipe to put back on for inspection. I know it's a hassle, but an option!

Cheers!
-Yo