BRZ Rear Side Under Spoilers released by STI

[Beyer Subaru]

What the? I didn't even notice the decal. **Runs outside to look at car**

[cslntuee]

Originally Posted by Beyer Subaru

Yep. If they had made them level I'm sure that there would have been a fitment issue. It's not as fluid a transition as I would like but it looks "finished" now.

The install like all the other pieces was very straight forward. I didn't even put it on the lift. Just jacked from the diff, took my time and it was less than an hour.

Originally Posted by Beyer Subaru

Hmmmm, yes and no. The Ht kit is close but it is still a little higher than level, at an entirely different angle, shape, color, etc.. The Ht is good if you wanna go cheap and are going after a different look than OEM.

I think that if you go full Ht, STi, Seibon, Password, etc it will be fluid. But I wouldn't mix and match many of these pieces.

I tried to find the suitable rear spats which can align the OEM diffuser well or at least close. I feel that will look better.
The HT Auto one is a little bit too subtle for me
How do you think the USAS and Chargespeed one as below?
Do you think they can align with OEM diffuser well with good fitment (without any modification)?
Thank you.
Pic1. URAS
Pic2: Chargespeed

[Supermassive]

I'm going with the spat in pic one. It's URAS I believe and I am hoping that it will flow well with my diffuser.

[Beyer Subaru]

Originally Posted by cslntuee

Awesome JDM kits.

Chargespeed - No
URAS - Maybe. It looks to be at or close to the STi spat height. The painted section definitely looks taller than the STi spat.

[Celica00]

was checking japan parts.. saw rear mud flaps for 450 dollars... wow.

[cslntuee]

Originally Posted by Beyer Subaru

Chargespeed - No
URAS - Maybe. It looks to be at or close to the STi spat height. The painted section definitely looks taller than the STi spat.

Why?
If HT Auto is close to align the OEM diffuser, Chargespeed should also close.
Both are attach the bottom of the rear bumper.
I think the URAS should consider the black part to see it can align the left and right part of the OEM
diffuser or not ( the center of the OEM diffuser is lower)
The height of the STI spats looks close of the center of the rear tire.
However the HT Auto , Chargespeed and URAS looks lower than the center of the tire.
That’s why I feel they (HT Auto , Chargespeed and URAS) can align the OEM diffuser better than STI,
but I am not sure. I might be wrong.
Thank you.

[Beyer Subaru]

The HT doesn't align perfectly. It is still higher than level.

You will need something that drops lower than the rear bumper to line up with the diffuser.

The STi spats are lower than the bumper and still do not align at level.

Really, I don't think that it is an issue of concern. I think you can pick the one that you like and you will be happy. No worries.

[cslntuee]

Originally Posted by Beyer Subaru

The HT doesn't align perfectly. It is still higher than level.

You will need something that drops lower than the rear bumper to line up with the diffuser.

The STi spats are lower than the bumper and still do not align at level.

Really, I don't think that it is an issue of concern. I think you can pick the one that you like and you will be happy. No worries.

Or might choose this kind of rear style as below and will never need to

worry the alignment issue anymore. ><

[Beyer Subaru]

Yep. There are a plenty to choose from with the twins. This was a super strong draw to the car for me. Seeing aftermarket support from to OEM's and all of the usual suspects.

I think that you'll really like which ever one you choose. I've yet to see one that I don't like that is within reason.

[cslntuee]

Originally Posted by Beyer Subaru

The HT doesn't align perfectly. It is still higher than level.

You will need something that drops lower than the rear bumper to line up with the diffuser.

The STi spats are lower than the bumper and still do not align at level.

Really, I don't think that it is an issue of concern. I think you can pick the one that you like and you will be happy. No worries.

I saw Boosted’s car.
http://www.ft86club.com/forums/showthread.php?p=586737&posted=1#post586737
Actually, the HT Auto rear spat align the OEM diffuser very closely. It is much closer than the STI rear spat.
Thanks.

[Beyer Subaru]

Schveet! From that angle they look really good.

[disgruntld]

Originally Posted by switchlanez

The final pieces for the STI aero kit are available to complete the kit. I emailed japanparts.com asking them to add it to their catalog for purchase.



http://translate.google.com/translat...8.html&act=url

Sorry to wander off topic, but do you know anything about those tail lights? They look almost stock, but they have the black accents and don't have the red lenses to the outside of the casing.

[Beyer Subaru]

They are JDM 86/BRZ spec. They are exactly like the USDM less the red reflector. They get a clear reflector instead.

There aren't any black accents. It's just the lighting.

[disgruntld]

Originally Posted by Beyer Subaru

They are JDM 86/BRZ spec. They are exactly like the USDM less the red reflector. They get a clear reflector instead.

There aren't any black accents. It's just the lighting.

I can understand the accents being the lighting but my SSM BRZ has red reflectors towards the outside.