NC

[DangerRuss]

Originally Posted by StOpNG0x

Also...

I spotted a WR Blue Pearl BRZ Premium (I think) around 8:50 AM this morning turning onto highway 29 in Concord in front of Waffle house heading southbound towards Charlotte.

It was a fine female with blonde hair. Is that anyone here?

I work in Concord, have also seen this car once on poplar tent road between 85 and george liles just before dark about two weeks ago

[ApoNono]

Originally Posted by DangerRuss

What do you all think about meeting up at the cars and coffee meet on Saturday, January 5, 2013 at the NC Music Factory?

Me and a friend of mine were talking about going to this. He has a 2013 Mustang GT 5.0

Correction: we are in Raleigh and talking about going to that cars and coffee in Cary

[StOpNG0x]

Originally Posted by DangerRuss

I work in Concord, have also seen this car once on poplar tent road between 85 and george liles just before dark about two weeks ago

I work in Concord as well. I'll probably see you around if you travel 29...

[NotSoJDM]

Originally Posted by ApoNono

Me and a friend of mine were talking about going to this. He has a 2013 Mustang GT 5.0

Correction: we are in Raleigh and talking about going to that cars and coffee in Cary

I'll be there in my limited WRB BRZ. with new goodies. I'm sure you'll be able to spot me

See you guys there

[USMC -FRS]

Guy's Just FYI Scott Clark as 2 on the floor right now. One Red MT and White Pearl AT. I had a very good experience contrary to another person at that same dealership I guess it's all in the salesman you get. I dealt with Bobby Jessup and Jim Dalo Sales Manager Got a great deal.

[NotSoJDM]

Plasti Dip roof and fender vents.

Opinions?

[celica73]

Looks cool. Is plastidip easier to apply/remove than 3M film? Certainly less expensive.

[NotSoJDM]

It's just like spray painting anything else. It's very easy to use. And if you mess up, just let it dry/peel/redo. And at $6/can its not a big investment. This is less than 2 cans between the two jobs.

I actually did this to preview what black 3m film will look like on my roof. I think the 3m film will look cleaner and is worth the investment. But it was a big step I didn't want to take without knowing what the color change would look like.

[ML]

Originally Posted by NotSoJDM

It's just like spray painting anything else. It's very easy to use. And if you mess up, just let it dry/peel/redo. And at $6/can its not a big investment. This is less than 2 cans between the two jobs.

I actually did this to preview what black 3m film will look like on my roof. I think the 3m film will look cleaner and is worth the investment. But it was a big step I didn't want to take without knowing what the color change would look like.

How did you get the side vents off?

[NotSoJDM]

Originally Posted by ML

How did you get the side vents off?

They have 6 plastic poppers holding them in. I started the first three by prying on them from under the hood inside the fender with a flat blade screwdriver. Then I pulled it off by hand once those three were started. Just be careful as there is adhesive on the end closest to the door. I have some automotive molding adhesive so I just cleaned the old off and reapplied my own after paint.

[DangerRuss]

Originally Posted by NotSoJDM

Attachment 23467

Plasti Dip roof and fender vents.

Opinions?

Looks good. Do have any more pictures? Also do you have any tips for working with plastidip? I am planning on plastidip for my rims and also for the inside trim pieces that are silver.

[DangerRuss]

Just saw an Asphalt?(I think) Scion FR-S on the corner of Monroe Road and Sharon Amity at the CVS. Christmas Day about 3pm. Anyone on here?

[NotSoJDM]

Originally Posted by DangerRuss

Looks good. Do have any more pictures? Also do you have any tips for working with plastidip? I am planning on plastidip for my rims and also for the inside trim pieces that are silver.

Yeah I have some others ill add. Yeah I have some tips.

- multiple light coats, too heavy and it'll sag
- don't worry about how it looks wet
- pay attention to the spray nozzle, it likes to clot while spraying and then drip down on the piece you're painting
- if you tape off parts, pull the tape while its still wet.

I think the interior parts will look really good done.





Sent from my iPad using Tapatalk HD

[DangerRuss]

Originally Posted by NotSoJDM

Yeah I have some others ill add. Yeah I have some tips.

- multiple light coats, too heavy and it'll sag
- don't worry about how it looks wet
- pay attention to the spray nozzle, it likes to clot while spraying and then drip down on the piece you're painting
- if you tape off parts, pull the tape while its still wet.

I think the interior parts will look really good done.

Thanks!