ALL ARIZONA FR-S/BRZ OWNERS HOME PAGE

[Yruyur]

Had 9 of us at one point. It was fun everyone.

Sent from my SCH-I535 using Tapatalk 2

[gmookher]

I was all alone at the track today..why dont you guys come out?our cars do sooo well...

[jeffsides]

Originally Posted by gmookher

I was all alone at the track today..why dont you guys come out?our cars do sooo well...

I work every Saturday. Never get Saturdays off 😢

[RedLeader]

Originally Posted by gmookher

I was all alone at the track today..why dont you guys come out?our cars do sooo well...

I did my suspension swap today. That's why i didn't go to any track today. Took way longer than I expected it would. Car sits much nicer though. Needs an alignment.

[gmookher]

Originally Posted by jeffsides

I work every Saturday. Never get Saturdays off 😢

new member days are saturdays, but this was a weekend with friday, saturday and sunday time!

[gmookher]

Originally Posted by RedLeader

I did my suspension swap today. That's why i didn't go to any track today. Took way longer than I expected it would. Car sits much nicer though. Needs an alignment.

whats going on in suspension land?(i couldnt wait any more for coilovers and caved in and got soem h&r's that proved to be money well spent till I can afford coil overs

[Accurate Race Shop]

Originally Posted by gmookher

whats going on in suspension land?(i couldnt wait any more for coilovers and caved in and got soem h&r's that proved to be money well spent till I can afford coil overs

I want springs now but my Corvette needs new air filters so not this month

Sent from my SGH-T989 using Tapatalk 2

[gmookher]

Originally Posted by jasper

I want springs now but my Corvette needs new air filters so not this month

Sent from my SGH-T989 using Tapatalk 2

dude, the vettes the one you want at the track!

[RedLeader]

Originally Posted by gmookher

whats going on in suspension land?(i couldnt wait any more for coilovers and caved in and got soem h&r's that proved to be money well spent till I can afford coil overs

Eibach pro kit, whiteline camber bolts, many busted knuckles.

[gmookher]

Originally Posted by RedLeader

Eibach pro kit, whiteline camber bolts, many busted knuckles.

I used power tools, but no busted knuckles at all, likely the fastest and easiest coil install I have ever done on a car, no coil compressor needed, and we need to get together for some test drives

youre using the whiteline 16's right?

I went with H&R super sport, little more drop, lot more firmness..lots more of their stuff trackside over eibach, which seems to dominate the daily driver setups more, and found the h&r to better match the original bias of the car

I drove yuryur's thru some curves here in sedona, and it may have been tires, but a very different feel than the original brz coils, and definately different from h&r's

[RedLeader]

Originally Posted by gmookher

I used power tools, but no busted knuckles at all, likely the fastest and easiest coil install I have ever done on a car, no coil compressor needed, and we need to get together for some test drives

youre using the whiteline 16's right?

I went with H&R super sport, little more drop, lot more firmness..lots more of their stuff trackside over eibach, which seems to dominate the daily driver setups more, and found the h&r to better match the original bias of the car

I drove yuryur's thru some curves here in sedona, and it may have been tires, but a very different feel than the original brz coils, and definately different from h&r's

I decided for the time being I'm not going to do coilovers, because this IS my daily driver, and it just does track duty every so often.

I had no powertools or air tools when my buddies and I did the install, so we ended up committing automotive sin, which I shall not describe. All in all, it went reletively smoothly until time came to reassemble the rears, because without the fancy tool, its very difficult to hand tighten the top-nut. Ended up taking the rear struts to the dealership and paying them to tighten them for me before I installed them. Was trying to get the wheels painted too, but we just ran out of time, and since I wasn't comfortable putting the car up on all 4 jackstands on the slanted driveway, we could only lift one axle at a time, and the paint would have taken too long.

[jeffsides]

We missed you last night @thesleeper and @SMOKETREES. We were at least 9 deep + the wrecked one who hasn't got on the forum yet.

[jeffsides]

http://m.carbuzz.com/Article.aspx?Id=11283

[jeffsides]

^ 280HP BRZ STI