Visconti Tuning - Latest BRZ Flash Info - Page 228 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Visconti · 10-23-2012, 03:05 PM

Quote:

Originally Posted by Subforever

It was a little ambiguous in my head when filling the form. i was thinking that the "Fuel Economy Display" thing was part of the "Customized to my vehicle" . I should have used the "other" Issues field instead.

Sorry for the inconvenience John

I know its not very clear, and I know people aren't doing it on purpose.

It's just really hard to keep up with all this stuff so anyway you can make my life easier would be awesome for me.

-John

Bu-Tang · 10-23-2012, 03:20 PM

Quote:

Originally Posted by Visconti

Alrighty - I'd like to start a discussion with all of those who have Canadian Cars and are having a RaceRom Gauge problem.

Seems to be a problem from more than one of you so

If you have a Canadian Cluster you should have a tune file like this -

"RR-10895-ZA1J700C-STG1 STOCK INTAKE v1.07 FED-M"

Must have "FED-M" in it.

Basically - what problems are you noticing?

If you dont have the correct tune file I dont' need your input, just need you to fill out the form so i can send you a correct tune file.

Let me know

Thanks

John

My fuel gauge was wonkey after initial flash, but after first fill up its been fine for 300klms, Mine regardless of what map does not show A/F ratio or Fuel%.
I have not experienced any malfunctions of any sort with the tune.

Cheers

Visconti · 10-23-2012, 03:20 PM

Quote:

Originally Posted by Bu-Tang

My fuel gauge was wonkey after initial flash, but after first fill up its been fine for 300klms, Mine regardless of what map does not show A/F ratio or Fuel%.
I have not experienced any malfunctions of any sort with the tune.

Cheers

Can you make a video of what the cluster shows?

Subynewbie · 10-23-2012, 03:49 PM

Quote:

Originally Posted by Bu-Tang

My fuel gauge was wonkey after initial flash, but after first fill up its been fine for 300klms, Mine regardless of what map does not show A/F ratio or Fuel%.
I have not experienced any malfunctions of any sort with the tune.

Cheers

Mine is similiar to this John. l/100 km sometimes stays at 50.0. I believe mine does not show a/f ratio or fuel % either. Gas tank readings were a little off as well but may appear to be stabilizing. After driving approximately 100 miles after filling up, tank was reading less than 1/4 tank. I do have the "M" in the tune as well. Car runs great though!

Visconti · 10-23-2012, 03:52 PM

Quote:

Originally Posted by Subynewbie

Mine is similiar to this John. l/100 km sometimes stays at 50.0. I believe mine does not show a/f ratio or fuel % either. Gas tank readings were a little off as well but may appear to be stabilizing. After driving approximately 100 miles after filling up, tank was reading less than 1/4 tank. I do have the "M" in the tune as well. Car runs great though!

What does your show when on the A/F Map?

Opposed · 10-23-2012, 04:11 PM

Im now on 200 miles, and the guauge is only between 3/4 and 1/2. Its almost like the guage thinks a half a tank is empty, and 3/4 is a half tank if that makes sense. My avg MPG's on map 1 still reads about 68-72 mpg at all times.

Visconti · 10-23-2012, 04:13 PM

Quote:

Originally Posted by Opposed

Im now on 200 miles, and the guauge is only between 3/4 and 1/2. Its almost like the guage thinks a half a tank is empty, and 3/4 is a half tank if that makes sense. My avg MPG's on map 1 still reads about 68-72 mpg at all times.

Whats ur first name?

jpit · 10-23-2012, 04:19 PM

This worked for me.

Quote:

Originally Posted by brichard0625

for those that are having the bugs with the tune try resetting the ecu...My tank was on E yesterday and i was reading 36%..i unplugged the battery and waited a few minutes and then plugged it back in and the fuel tank adjusted itself. i filled up and drove about 70 miles after the guage is now accurate

brichard0625 · 10-23-2012, 04:42 PM

Quote:

Originally Posted by jpit

This worked for me.

Is the gas guage reading properly now?

jpit · 10-23-2012, 05:11 PM

Yes. But I haven't switched to the gas percentage function on map 4 yet. Don't know if that will throw it off again.

Opposed · 10-23-2012, 06:07 PM

Quote:

Originally Posted by Visconti

Whats ur first name?

Ian, sorry, I have not filled out the form yet, just been extremely busy... Heres a picture of my ave MPG after about 150 miles.

Symbiont · 10-23-2012, 06:51 PM

Quote:

Originally Posted by Opposed

Ian, sorry, I have not filled out the form yet, just been extremely busy... Heres a picture of my ave MPG after about 150 miles.

Yeah, that happened to me, too. It just sticks at 76.2 and doesn't move. I have no idea what that's supposed to indicate.

Symbiont · 10-23-2012, 06:52 PM

Quote:

Originally Posted by jpit

Yes. But I haven't switched to the gas percentage function on map 4 yet. Don't know if that will throw it off again.

I really want to use the autoblip, though.

bluecollarfrs · 10-23-2012, 07:33 PM

OK guys, I need some help here. When trying to flash, I selected the ROM that John emailed me, but it gives me an Error that says "A compatible ROM file must be chosen before the ECU can be programmed."It says I have an unknown ECU version

10-23-2012, 04:11 PM	#3184
Opposed Senior Member Join Date: Jun 2012 Drives: 2013 Asphalt FR-S Location: Bloomington, MN Posts: 1,156 Thanks: 499 Thanked 447 Times in 294 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Im now on 200 miles, and the guauge is only between 3/4 and 1/2. Its almost like the guage thinks a half a tank is empty, and 3/4 is a half tank if that makes sense. My avg MPG's on map 1 still reads about 68-72 mpg at all times. __________________ Asphalt FR-S: EcuTek Visconti STG2 tune, MAPerformance turbo kit, MAPerformance 3" exhaust, Hotchkis springs, Mach-V 17x9 Awesomes. Build thread: http://www.ft86club.com/forums/showthread.php?t=30703

10-23-2012, 07:33 PM	#3192
bluecollarfrs Member Join Date: Sep 2012 Drives: Ultramarine FR-S Location: Chesterfield, Va Posts: 94 Thanks: 27 Thanked 29 Times in 12 Posts Mentioned: 1 Post(s) Tagged: 6 Thread(s)	OK guys, I need some help here. When trying to flash, I selected the ROM that John emailed me, but it gives me an Error that says "A compatible ROM file must be chosen before the ECU can be programmed."It says I have an unknown ECU version Last edited by bluecollarfrs; 10-23-2012 at 07:50 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 03:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) — General Topics	0	05-24-2012 11:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 08:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) — General Topics	130	09-01-2011 02:42 PM

10-23-2012, 05:11 PM	#3188
jpit Senior Member Join Date: Jun 2012 Drives: Subaru BRZ Location: Port Angeles, WA Posts: 338 Thanks: 24 Thanked 234 Times in 86 Posts Mentioned: 22 Post(s) Tagged: 1 Thread(s)	Yes. But I haven't switched to the gas percentage function on map 4 yet. Don't know if that will throw it off again.

User Name		Remember Me?
Password