Visconti Tuning - Latest BRZ Flash Info - Page 205 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Visconti · 10-18-2012, 06:59 PM

Quote:

Originally Posted by DSTL

I flashed new racerom yesterday and back to stock earlier today, no issues.

Sweet , don't flash it again

DSTL · 10-18-2012, 07:01 PM

Quote:

Originally Posted by Visconti

Sweet , don't flash it again

Ha, yeah. Sucks of course I have the stock rom on it. Hanging tight though. Hope everyone who hit the problem has a relatively easy fix.

JPxM0Dz · 10-18-2012, 09:21 PM

Quote:

Originally Posted by xjohnx

you have to be moving for it to appear. at a stop it goes to blank lines like the MPG gauge does.

Thought I would update since I havn't drove the car since you last posted this.
I went through all the maps and nothing shows up anywhere on my display while driving like you mentioned. I tried each map individually, map 1 and then map 2, nevertheless the car still run great on this tune and John will hopefully releasing the updated rom soon

Foobar · 10-18-2012, 09:49 PM

Definitely have the bogging again with the AIRAID intake at low RPM high load situations.

Gonna take it out this weekend.

Sent from my Nexus 7 using Tapatalk 2

Opposed · 10-18-2012, 09:53 PM

Hrmmm, this doesn't seem right...Also gas gauge hasn't moved in 106 miles. I will fill out form.

ducks · 10-18-2012, 10:02 PM

Quote:

Originally Posted by Opposed

Hrmmm, this doesn't seem right...Also gas gauge hasn't moved in 106 miles. I will fill out form.

my map #1 is the fuel gauge one and my avg mpg readout shows that same number. i drove 70 miles on map 1 and the gas needle didn't move either.

then i swapped back and forth between maps 1 and 2 (afr gauge). eventually, the gas needle moved to where it should have been. maybe try swapping maps and driving around a bit?

cobrabyte · 10-18-2012, 10:02 PM

Quote:

Originally Posted by Foobar

Definitely have the bogging again with the AIRAID intake at low RPM high load situations.

Gonna take it out this weekend.

Sent from my Nexus 7 using Tapatalk 2

Not a bad idea, especially since that member cratered his motor and it had an AIRAID intake on it. Better safe than sorry until he hears what caused his motor to die.

dabocx · 10-18-2012, 10:06 PM

Im going to have to risk it on friday night or saturday morning since im going to the dealership to get my car checked for the rough idle.

Opposed · 10-18-2012, 10:10 PM

Quote:

Originally Posted by ducks

my map #1 is the fuel gauge one and my avg mpg readout shows that same number. i drove 70 miles on map 1 and the gas needle didn't move either.

then i swapped back and forth between maps 1 and 2 (afr gauge). eventually, the gas needle moved to where it should have been. maybe try swapping maps and driving around a bit?

Yea, that's a good idea. I have been on map 1 for three days now. But it started when I first flashed it and switched to map 3. My gas gauge went to empty and the light came on. I filled it up that night and now the gauge has barely moved.

Z06tofrs · 10-18-2012, 10:20 PM

Wait the map switching is available ? My apology between work school and family I barely have 5 minutes to read the forums.

JPxM0Dz · 10-18-2012, 10:24 PM

Quote:

Originally Posted by Foobar

Definitely have the bogging again with the AIRAID intake at low RPM high load situations.

Gonna take it out this weekend.

Sent from my Nexus 7 using Tapatalk 2

So that's on all maps your experiencing bogging ?

Mr.Jay · 10-18-2012, 10:33 PM

soo sad

John was great tho and I really do feel sorry for him cause he got a lot of people in this GB and still has other cars and other people bugging about tunes other than us.

Car is back at home now.. not by its own power tho but at least I can work on it and sleep in my own bed instead of chair bed

Yruyur · 10-18-2012, 11:22 PM

@Mr.Jay so what did you guys discover

Sent from my SCH-I535 using Tapatalk 2

Z06tofrs · 10-18-2012, 11:41 PM

So if I run as admin I can connect to my ecu yay; however, I still have 0 licenses so when I try to program it starts to run then tells me oops no licenses left

?

On the step shown on first page where you click apply license update. When I do that step it won't find a file to find and update. No clue why.

10-18-2012, 09:53 PM	#2861
Opposed Senior Member Join Date: Jun 2012 Drives: 2013 Asphalt FR-S Location: Bloomington, MN Posts: 1,156 Thanks: 499 Thanked 447 Times in 294 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	Hrmmm, this doesn't seem right...Also gas gauge hasn't moved in 106 miles. I will fill out form. __________________ Asphalt FR-S: EcuTek Visconti STG2 tune, MAPerformance turbo kit, MAPerformance 3" exhaust, Hotchkis springs, Mach-V 17x9 Awesomes. Build thread: http://www.ft86club.com/forums/showthread.php?t=30703

10-18-2012, 10:33 PM	#2868
Mr.Jay Senior Member Join Date: Mar 2011 Drives: FRS :D Location: Vancouver BC Posts: 2,985 Thanks: 545 Thanked 699 Times in 438 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	soo sad John was great tho and I really do feel sorry for him cause he got a lot of people in this GB and still has other cars and other people bugging about tunes other than us. Car is back at home now.. not by its own power tho but at least I can work on it and sleep in my own bed instead of chair bed __________________ Out of the FRS game

10-18-2012, 11:22 PM	#2869
Yruyur Senior Member Join Date: Jun 2012 Drives: Scion fr-s asphalt M/T Location: Phoenix, AZ Posts: 4,192 Thanks: 1,416 Thanked 1,631 Times in 941 Posts Mentioned: 96 Post(s) Tagged: 0 Thread(s)	@Mr.Jay so what did you guys discover Sent from my SCH-I535 using Tapatalk 2 __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 03:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) — General Topics	0	05-24-2012 11:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 08:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) — General Topics	130	09-01-2011 02:42 PM

10-18-2012, 10:06 PM	#2864
dabocx Senior Member Join Date: Jan 2012 Drives: Scion FRS Location: United States Posts: 1,267 Thanks: 564 Thanked 261 Times in 191 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	Im going to have to risk it on friday night or saturday morning since im going to the dealership to get my car checked for the rough idle.

10-18-2012, 10:20 PM	#2866
Z06tofrs Member Join Date: Aug 2012 Drives: Black fr-s Location: Florida Posts: 52 Thanks: 1 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Wait the map switching is available ? My apology between work school and family I barely have 5 minutes to read the forums.

10-18-2012, 11:41 PM	#2870
Z06tofrs Member Join Date: Aug 2012 Drives: Black fr-s Location: Florida Posts: 52 Thanks: 1 Thanked 7 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	So if I run as admin I can connect to my ecu yay; however, I still have 0 licenses so when I try to program it starts to run then tells me oops no licenses left ? On the step shown on first page where you click apply license update. When I do that step it won't find a file to find and update. No clue why.

User Name		Remember Me?
Password