Visconti Tuning - Latest BRZ Flash Info

[xjohnx]

Originally Posted by Sambosis

Thanks for the responses and it sounds like you are in the same exact boat as me... I'll just add that if I connect it to my car and try to open the STG1 Rom it says It's not customized for my car. If I try to open the stock... It brings up a bunch of parameters.

you need to fill out the update form.

[Mr.Jay]

Originally Posted by xjohnx

what exactly do you mean by "as often as i could"?



what was the error? what was the full filename of the tune you applied?

As often as I can as in whenever I saw the update button I hit it. I also hit update EcuTek Update button like 7 times before I actually detected the car and tired flashing.

I got the same commuincation error after the flash started got about 9% before I got a error. Now it says the ecu is partly programmed and may need to be flashed again to start.

RR-10826-FF-LL-AB-ZA1J700C-STG1 v1.07-6AC57D.BIN

Thats the file I got from John.

I'm now stuck at work with no moving car lol should of waiting for the in depth video

called John he is out street tuning and I won't hear from him for a couple hours

[Sambosis]

Originally Posted by xjohnx

you need to fill out the update form.

Yup... filled it out a little earlier, but then started thinking about it and thought maybe I just was looking in the wrong spot for the *.upd file. Thank you everyone for responding, I'm sure it will all get sorted out soon.

[cnk]

Originally Posted by Mr.Jay

As often as I can as in whenever I saw the update button I hit it. I also hit update EcuTek Update button like 7 times before I actually detected the car and tired flashing.

I got the same commuincation error after the flash started got about 9% before I got a error. Now it says the ecu is partly programmed and may need to be flashed again to start.

RR-10826-FF-LL-AB-ZA1J700C-STG1 v1.07-6AC57D.BIN

Thats the file I got from John.

I'm now stuck at work with no moving car lol should of waiting for the in depth video

I posted the video above.

[JPxM0Dz]

Originally Posted by Mr.Jay

As often as I can as in whenever I saw the update button I hit it. I also hit update EcuTek Update button like 7 times before I actually detected the car and tired flashing.

I got the same commuincation error after the flash started got about 9% before I got a error. Now it says the ecu is partly programmed and may need to be flashed again to start.

RR-10826-FF-LL-AB-ZA1J700C-STG1 v1.07-6AC57D.BIN

Thats the file I got from John.

I'm now stuck at work with no moving car lol should of waiting for the in depth video

called John he is out street tuning and I won't hear from him for a couple hours

Your brave, I flashed tune in my own garage

[xjohnx]

Originally Posted by Mr.Jay

As often as I can as in whenever I saw the update button I hit it. I also hit update EcuTek Update button like 7 times before I actually detected the car and tired flashing.

I got the same commuincation error after the flash started got about 9% before I got a error. Now it says the ecu is partly programmed and may need to be flashed again to start.

RR-10826-FF-LL-AB-ZA1J700C-STG1 v1.07-6AC57D.BIN

Thats the file I got from John.

I'm now stuck at work with no moving car lol should of waiting for the in depth video

called John he is out street tuning and I won't hear from him for a couple hours

out of curiosity, open ecutek, what version number is shown at the top?

[Mr.Jay]

Originally Posted by xjohnx

out of curiosity, open ecutek, what version number is shown at the top?

You mean ProECU? 1.0.0.10874

Not sure if thats what you wanted. downloaded from ecutek site

Originally Posted by JPxM0Dz

Your brave, I flashed tune in my own garage

Brave or foolish

[xjohnx]

Originally Posted by Mr.Jay

You mean ProECU? 1.0.0.10874

Not sure if thats what you wanted. downloaded from ecutek site

looks like you used the right file and are using the most recent version of ecutek. at this point i'd say sit tight and wait for John.

[Z06tofrs]

Originally Posted by Laika

If you're software isn't picking up your car it's a drivers issue. Did you download/install the drivers? It's not exactly part of the instructions on page 1.

Im pretty sure I did multiple times. I followed the instructions. but forget about the car not registering, im more worried about my license number staying at 0. I forgot to mention before my laptop is BSOD sometimes when I attach my ecutek cable. the computer is not even a week old samsung i7 750gb hdd 8gb ram so its not a crappy laptop. I'm actually in class now dam late night college classes .

[Mr.Jay]

Originally Posted by xjohnx

looks like you used the right file and are using the most recent version of ecutek. at this point i'd say sit tight and wait for John.

Yeah I was being pretty careful after a few guys bricked their cars

I was actually hoping to hear from them to see if the ECU started to flash before the error occurred or not

[Laika]

Originally Posted by Z06tofrs

Im pretty sure I did multiple times. I followed the instructions. but forget about the car not registering, im more worried about my license number staying at 0. I forgot to mention before my laptop is BSOD sometimes when I attach my ecutek cable. the computer is not even a week old samsung i7 750gb hdd 8gb ram so its not a crappy laptop. I'm actually in class now dam late night college classes .

Hmm it looks like we may be in a similar position with the license number. I shot an email to Visconti, lets see what happens next. Hang in there bud, John's doin his thing to get everyone set up.

[xjohnx]

Originally Posted by Z06tofrs

Im pretty sure I did multiple times. I followed the instructions. but forget about the car not registering, im more worried about my license number staying at 0. I forgot to mention before my laptop is BSOD sometimes when I attach my ecutek cable. the computer is not even a week old samsung i7 750gb hdd 8gb ram so its not a crappy laptop. I'm actually in class now dam late night college classes .

dude. stop. if your computer is BSOD'ing you do NOT want to risk it having a BSOD mid-flash. That's just asking for a brick.

[JPxM0Dz]

Originally Posted by Mr.Jay

Yeah I was being pretty careful after a few guys bricked their cars

I was actually hoping to hear from them to see if the ECU started to flash before the error occurred or not

Yeah, one would think if the file was corrupted to begin with, it wouldn't flash at all

Was it a communication error message ?

[DSTL]

Originally Posted by Mr.Jay

Yeah I was being pretty careful after a few guys bricked their cars

I was actually hoping to hear from them to see if the ECU started to flash before the error occurred or not

Pretty sure Hawaiian and jpit were two of the temp bricks if you want to try them. That's off the top of my head can't remember who else.