Visconti Tuning - Latest BRZ Flash Info - Page 193 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

JPxM0Dz · 10-17-2012, 05:13 PM

Has anyone tested launch control on latest tune ?

Laika · 10-17-2012, 05:16 PM

I guess I need help....

I can't get my "remaining licenses" to go to 1. It's been at zero and isn't doing anything. I think this is the reason I can't flash. The instructions are a bit vague (have no words at all) but I still don't think I did anything wrong. I updated ecutek and then hit apply license update and opened the file name that has my dongle ID plus "visconti tuning".

mach330 · 10-17-2012, 05:24 PM

Quote:

Originally Posted by Laika

I guess I need help....

I can't get my "remaining licenses" to go to 1. It's been at zero and isn't doing anything. I think this is the reason I can't flash. The instructions are a bit vague (have no words at all) but I still don't think I did anything wrong. I updated ecutek and then hit apply license update and opened the file name that has my dongle ID plus "visconti tuning".

If you've flashed before (successfully) on your ecu, the license is now on the ecu that you can flash over and over again.

Tap'd from my G-Nex

Laika · 10-17-2012, 05:26 PM

Quote:

Originally Posted by mach330

If you've flashed before (successfully) on your ecu, the license is now on the ecu that you can flash over and over again.

Tap'd from my G-Nex

I haven't flashed before.

Once I hit program ECU I get a warning saying the process had to close because I didn't have a tuner license.

OP says

"If you update license with the new license before flash. License = 0"

Not totally sure if I got this right but I think he's saying if I updated with a new license before flashing the license will = zero...I don't believe this is the issue because I haven't played with it till two days ago when I thought I had the right tune.

cnk · 10-17-2012, 05:48 PM

Did you run the license update and install the license update file located in the folder with your dongle ID?

UncleFester · 10-17-2012, 05:52 PM

Quote:

Originally Posted by JoeBoxer

Did you fill out the new form for missing items?

Is it for AT owners now? Last I read was MT only. Either way I have filled two of these out before. Each form seems to place me in another queue list where I just get neglected. This is beyond ridiculous and I want an answer.

JPxM0Dz · 10-17-2012, 06:07 PM

Quote:

Originally Posted by UncleFester

Is it for AT owners now? Last I read was MT only. Either way I have filled two of these out before. Each form seems to place me in another queue list where I just get neglected. This is beyond ridiculous and I want an answer.

Yeah it's only by the grace of God I'm sure that I got mine when I did, Otherwise you may have heard about me in the 6 o'clock News... "Man goes postal after long wait with no cable or tune from Visconti"

JoeBoxer · 10-17-2012, 06:13 PM

Quote:

Originally Posted by UncleFester

Is it for AT owners now? Last I read was MT only. Either way I have filled two of these out before. Each form seems to place me in another queue list where I just get neglected. This is beyond ridiculous and I want an answer.

If you are missing the cable it doesn't matter which transmission, I am right there with you though i have a cable but no tune. Paid in full 60 days ago.

SkAsphalt · 10-17-2012, 06:20 PM

Quote:

Originally Posted by JoeBoxer

If you are missing the cable it doesn't matter which transmission, I am right there with you though i have a cable but no tune. Paid in full 60 days ago.

I hear ya, I was number 11 or something to get in on the group buy.

Calum · 10-17-2012, 07:22 PM

@Laika, John's street tuning GTRs tonight. Which means he's working and most likely has his phone with him. I can't speak for him but in the past he's asked guys to call him if they were having issues with things like that.

Laika · 10-17-2012, 07:34 PM

Quote:

Originally Posted by cnk

Did you run the license update and install the license update file located in the folder with your dongle ID?

As far as I can tell....yes.

Excuse the pictures, I didn't even want to bother trying to figure out how to screenshot on bootcamp

Appreciate your help guys. John said he'd get back to me about this but I'd rather avoid that route if I can. It's just gonna slow down other people from getting their tunes.

DSTL · 10-17-2012, 07:35 PM

Quote:

Originally Posted by Laika

I haven't flashed before.

Once I hit program ECU I get a warning saying the process had to close because I didn't have a tuner license.

OP says

"If you update license with the new license before flash. License = 0"

Not totally sure if I got this right but I think he's saying if I updated with a new license before flashing the license will = zero...I don't believe this is the issue because I haven't played with it till two days ago when I thought I had the right tune.

You applied license update per tutorial in first post?

Edit: ha oops just saw your post after I posted this. Huh, odd.

cnk · 10-17-2012, 07:37 PM

Quote:

Originally Posted by Laika

As far as I can tell....yes.

Excuse the pictures, I didn't even want to bother trying to figure out how to screenshot on bootcamp

Appreciate your help guys. John said he'd get back to me about this but I'd rather avoid that route if I can. It's just gonna slow down other people from getting their tunes.

Maybe try uninstall and reinstall?

Laika · 10-17-2012, 07:40 PM

Quote:

Originally Posted by DSTL

You applied license update per tutorial in first post?

Edit: ha oops just saw your post after I posted this. Huh, odd.

Hah yup. As I get older I've been finding myself reading instructions more carefully and I read this one to a tee (?) before I started anything.

Quote:

Originally Posted by cnk

Maybe try uninstall and reinstall?

I'll give it a shot.

10-17-2012, 05:16 PM	#2690
Laika When In Doubt... Join Date: May 2011 Drives: Slowww Location: PA215 Posts: 1,844 Thanks: 1,023 Thanked 752 Times in 412 Posts Mentioned: 20 Post(s)	I guess I need help.... I can't get my "remaining licenses" to go to 1. It's been at zero and isn't doing anything. I think this is the reason I can't flash. The instructions are a bit vague (have no words at all) but I still don't think I did anything wrong. I updated ecutek and then hit apply license update and opened the file name that has my dongle ID plus "visconti tuning". __________________ Join the Galaxy Blue Silica BRZ registry below: https://docs.google.com/spreadsheet/...2c&usp=sharing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 02:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) — General Topics	0	05-24-2012 10:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 07:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) — General Topics	130	09-01-2011 01:42 PM

10-17-2012, 05:48 PM	#2693
cnk Senior Member Join Date: Aug 2012 Drives: '13 DGM BRZ Limited Location: NJ Posts: 1,202 Thanks: 59 Thanked 547 Times in 339 Posts Mentioned: 8 Post(s)	Did you run the license update and install the license update file located in the folder with your dongle ID?

10-17-2012, 07:22 PM	#2698
Calum That Guy Join Date: Dec 2011 Drives: 2013 asphalt FRS MT Location: Halifax, Nova Scotia Posts: 4,865 Thanks: 5,058 Thanked 2,868 Times in 1,499 Posts Mentioned: 82 Post(s)	@Laika, John's street tuning GTRs tonight. Which means he's working and most likely has his phone with him. I can't speak for him but in the past he's asked guys to call him if they were having issues with things like that.

User Name		Remember Me?
Password