Visconti Tuning - Latest BRZ Flash Info - Page 188 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

UncleFester · 10-16-2012, 11:53 AM

Quote:

Originally Posted by Visconti

Alrighty

If your missing something , e85 tune, 100 octane tune, Crawford AOS or having issues with the tune file not flashing please fill this form out.

Please fill this form out ONLY if you have a 6 Speed.

Visconti Tuning Request Form

Still no cable or tunes for my auto. Guess that will be another form?

gms · 10-16-2012, 11:58 AM

Quote:

Originally Posted by Visconti

Alrighty

If your missing something , e85 tune, 100 octane tune, Crawford AOS or having issues with the tune file not flashing please fill this form out.

Please fill this form out ONLY if you have a 6 Speed.

Visconti Tuning Request Form

Still no cable or tune for MT. But located in Germany. Not possible to choose in form.
What is to do here?

Yruyur · 10-16-2012, 12:17 PM

No cable = missing proecu kit

Sent from my SCH-I535 using Tapatalk 2

Gregory Gawaran · 10-16-2012, 12:32 PM

Form filled out!

xjohnx · 10-16-2012, 12:33 PM

John's watching the form for updates. No need to post here after completing it.

gms · 10-16-2012, 12:42 PM

Missing ProEcu Kit... I know...
Can't choose location "Germany" or "somewhere else in the world"...
Is the Form just for US and Canada????

xjohnx · 10-16-2012, 12:44 PM

Quote:

Originally Posted by gms

Missing ProEcu Kit... I know...
Can't choose location "Germany" or "somewhere else in the world"...
Is the Form just for US and Canada????

For the most part. Just enter a US state and in the comments section include your actual address.

Calum · 10-16-2012, 01:01 PM

Ok, I did some playing and here's my findings.

Flat Foot shit work if you have the gas matted. Lift even the tiniest bit and you bounce off the rev limiter.

Map switching works. Pull lever back toward driver, wait until tach points to number corresponding to map I'm presently running. Push lever up or down to change maps, and pull lever toward me again to set the map.

Auto blip is not rev matching, as I understand it. I've had the car blip once and I wasn't paying full attention to where my feet were so I don't yet know what I'm doing wrong. I've tried many times to do what I've seen in the video.

Feelin' a little stupid about this one.

Launch control doesn't seem to work. I've tried in all four maps and every time I just bounce off the rev limiter. I'm wondering if there's more to this, such as some way to turn it on within the map. But that doesn't seem to fit with everything else.

A/F and tank % are working, just not correctly. My cluster reads in liters/100 kilometers. If I do the conversions from L/100km's to mpg(US)the numbers work properly. As it is, I just filled up and I'm showing 2.4 which would equal 98% fuel in the tank. Under WOT I'm showing 18.4-18.8 which is 12.7-12.5 air fuel ratio.
@Visconti, if you or if ECUTEK needs a Canadain cluster, to test conversion software, shoot me a PM.

xjohnx · 10-16-2012, 01:12 PM

Quote:

Originally Posted by Calum

@Visconti, if you need a Canadian cluster, or if ECUTEK needs a Canadain cluster, to test conversion software, shoot me a PM.

the clusters should be the same, just a matter of whether it's in KM/h or MPH mode, no? i can try to verify on my way back to work from my lunch break by switching to metric.

Calum · 10-16-2012, 01:19 PM

Quote:

Originally Posted by xjohnx

the clusters should be the same, just a matter of whether it's in KM/h or MPH mode, no? i can try to verify on my way back to work from my lunch break by switching to metric.

No, it always reads in liters / 100 kms. I can change from km/hour to miles/hour, but that doesn't change the fuel consumptions read out. Trust me I tried.

xjohnx · 10-16-2012, 01:30 PM

Quote:

Originally Posted by Calum

No, it always reads in liters / 100 kms. I can change from km/hour to miles/hour, but that doesn't change the fuel consumptions read out. Trust me I tried.

ahh. in that case, good eye! i'm sure John will be in touch regarding this and a couple other minor bugs in the near future.

JPxM0Dz · 10-16-2012, 01:44 PM

Quote:

Originally Posted by xjohnx

ahh. in that case, good eye! i'm sure John will be in touch regarding this and a couple other minor bugs in the near future.

I'm gonna keep harassing you post a video flash how to

xjohnx · 10-16-2012, 01:45 PM

Quote:

Originally Posted by JPxM0Dz

I'm gonna keep harassing you post a video flash how to

i was going to but then someone else said they were on it.

LeavingNormal · 10-16-2012, 01:48 PM

Hawaiian said he's got a video already just needs to put it together and post it.

10-16-2012, 12:17 PM	#2621
Yruyur Senior Member Join Date: Jun 2012 Drives: Scion fr-s asphalt M/T Location: Phoenix, AZ Posts: 4,192 Thanks: 1,416 Thanked 1,631 Times in 941 Posts Mentioned: 96 Post(s) Tagged: 0 Thread(s)	No cable = missing proecu kit Sent from my SCH-I535 using Tapatalk 2 __________________

10-16-2012, 01:01 PM	#2626
Calum That Guy Join Date: Dec 2011 Drives: 2013 asphalt FRS MT Location: Halifax, Nova Scotia Posts: 4,865 Thanks: 5,058 Thanked 2,868 Times in 1,499 Posts Mentioned: 82 Post(s) Tagged: 1 Thread(s)	Ok, I did some playing and here's my findings. Flat Foot shit work if you have the gas matted. Lift even the tiniest bit and you bounce off the rev limiter. Map switching works. Pull lever back toward driver, wait until tach points to number corresponding to map I'm presently running. Push lever up or down to change maps, and pull lever toward me again to set the map. Auto blip is not rev matching, as I understand it. I've had the car blip once and I wasn't paying full attention to where my feet were so I don't yet know what I'm doing wrong. I've tried many times to do what I've seen in the video. Feelin' a little stupid about this one. Launch control doesn't seem to work. I've tried in all four maps and every time I just bounce off the rev limiter. I'm wondering if there's more to this, such as some way to turn it on within the map. But that doesn't seem to fit with everything else. A/F and tank % are working, just not correctly. My cluster reads in liters/100 kilometers. If I do the conversions from L/100km's to mpg(US)the numbers work properly. As it is, I just filled up and I'm showing 2.4 which would equal 98% fuel in the tank. Under WOT I'm showing 18.4-18.8 which is 12.7-12.5 air fuel ratio. @Visconti, if you or if ECUTEK needs a Canadain cluster, to test conversion software, shoot me a PM. Last edited by Calum; 10-16-2012 at 01:20 PM. Reason: shitting grammer got slightly better

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 03:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) — General Topics	0	05-24-2012 11:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 08:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) — General Topics	130	09-01-2011 02:42 PM

10-16-2012, 12:32 PM	#2622
Gregory Gawaran Senior Member Join Date: Oct 2011 Drives: 2018 Subaru BRZ tS Location: Anna, TX Posts: 142 Thanks: 4 Thanked 24 Times in 12 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Form filled out!

10-16-2012, 12:33 PM	#2623
xjohnx Grip>Slip Join Date: Jun 2012 Drives: 13 SWP BRZ Ltd - Innovate Powered! Location: RVA Posts: 3,563 Thanks: 656 Thanked 1,717 Times in 1,031 Posts Mentioned: 45 Post(s) Tagged: 3 Thread(s)	John's watching the form for updates. No need to post here after completing it.

10-16-2012, 12:42 PM	#2624
gms Member Join Date: Jun 2012 Drives: Toyota GT 86 Location: Germany, Nordschleife Posts: 30 Thanks: 2 Thanked 5 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Missing ProEcu Kit... I know... Can't choose location "Germany" or "somewhere else in the world"... Is the Form just for US and Canada????

User Name		Remember Me?
Password