Visconti Tuning - Latest BRZ Flash Info - Page 99 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Visconti · 09-18-2012, 02:18 AM

Nope that helps

Can't keep track of all this stuff

Thanks !

DSTL · 09-18-2012, 05:56 AM

Quote:

Originally Posted by Visconti

Nope that helps

Can't keep track of all this stuff

Thanks !

That exhange is by far my favorite on here for awhile. Hahaahaa. Oh Visconti. Pulled another tank of E85 btw and 17.5 mpg. Think that's where it's sticking for me 17.5-18 mpg. Getting around 200 mi per tank without scraping bottom. That's really not bad. Impressed it's pulling about the same mpg proportionately to gas as energy content with all the extra power. Engine seems so much happier on it too. It just sounds and feels more settled in every way. Still wish there was some kind of low end torque without going FI but whatever. Wind it up and there's enough scoot there to make it fun.

cuddefred · 09-18-2012, 08:59 AM

Quote:

Originally Posted by Visconti

Now I'm a long time Subie dood.

I've always had a Crawford AOS on my car - because it WORKS.

The problem was always the price.

Well good news!

I'm going to offer STG1 Flash Package that include the Crawford AOS.

I'm thinking $1200 + shipping w/ the ProECU Kit & STG1 Flash

What are you thoughts?

What CEL from traction control light?

I only know of one person that got a CEL and it was from the traction control harness coming unplugged.

But yes I do have the updated dealer flash.

When I have a little more information on it I'll make my decision on what to do

Hi John (or anyone else), I am new to all of this stuff - what are the benefits of this if we run it with your stage 1 flash please? Cheers.

Opposed · 09-18-2012, 09:17 AM

Quote:

Originally Posted by cuddefred

Hi John (or anyone else), I am new to all of this stuff - what are the benefits of this if we run it with your stage 1 flash please? Cheers.

Everything you need to know is inside this thread. Go ahead and start with the original EcuTek thread. There is lots of good info in here. http://www.ft86club.com/forums/showt...ghlight=ecutek

Visconti · 09-18-2012, 10:18 AM

Good morning!

It's a great day for all BRZ/FRS owners

-EcuTek Update Time!! -

-Speed Density is up and running!
-Auto blip is working!
-Map Switching is now easier - RPM Tac now indicates which map your on by pointing to 1k, 2k, 3k, 4k when changing maps!
-Over boost fuel cut is now available for forced induction guys!

Oh First shipment of ProECU cables have been shipped out !

There's more

John

brichard0625 · 09-18-2012, 10:25 AM

are there going to be cables available at dyno day sat?

Visconti · 09-18-2012, 10:27 AM

Quote:

Originally Posted by brichard0625

are there going to be cables available at dyno day sat?

Not for anyone that was part of the group buy.

All of those cables are getting shipped at the same time.

Cables are coming in 6 different shipments and they'll still need to be prepared.

John

brichard0625 · 09-18-2012, 10:30 AM

Quote:

Originally Posted by Visconti

Not for anyone that was part of the group buy.

All of those cables are getting shipped at the same time.

Cables are coming in 6 different shipments and they'll still need to be prepared.

John

ok no problem.

#87 · 09-18-2012, 10:31 AM

Please vid of auto blip as soon as you can, that's what i've been waiting for

Opposed · 09-18-2012, 10:35 AM

I want to hear about the "there's more" Part

Good news none the less, thanks for the update.

Foobar · 09-18-2012, 10:40 AM

Quote:

Originally Posted by cuddefred

Hi John (or anyone else), I am new to all of this stuff - what are the benefits of this if we run it with your stage 1 flash please? Cheers.

Quote:

Originally Posted by Opposed

Everything you need to know is inside this thread. Go ahead and start with the original EcuTek thread. There is lots of good info in here. http://www.ft86club.com/forums/showt...ghlight=ecutek

I think cuddefred was asking about the benefit of combining the Crawford AOS with the STG1 flash.

They are independent of each other, John's just passing along a bundle deal. One does not require the other, nor are there any synergistic effects of combining the two.

An air oil separator prevents oil blow-by from being displaced into the intake tract on engines where crankcase pressure is high, such as high RPM applications. Keeps your engine clean, and prolongs its useful life.

Foobar · 09-18-2012, 10:40 AM

Quote:

Originally Posted by Visconti

Good morning!

It's a great day for all BRZ/FRS owners

-EcuTek Update Time!! -

-Speed Density is up and running!
-Auto blip is working!
-Map Switching is now easier - RPM Tac now indicates which map your on by pointing to 1k, 2k, 3k, 4k when changing maps!
-Over boost fuel cut is now available for forced induction guys!

Oh First shipment of ProECU cables have been shipped out !

There's more

John

BRING IT ON!

cobrabyte · 09-18-2012, 10:48 AM

@Visconti... Any clue whether existing GB buyers will be able to purchase the Crawford AOS at the same discount through you?

Visconti · 09-18-2012, 10:56 AM

Quote:

Originally Posted by cobrabyte

@Visconti... Any clue whether existing GB buyers will be able to purchase the Crawford AOS at the same discount through you?

Idk - I have to talk to Crawford.

What did you have in mind?

But there will be a group buy here for them later this week - and not by me.

John

09-18-2012, 10:25 AM	#1378
brichard0625 Senior Member Join Date: Jun 2012 Drives: 2013 Scion Frs(Scarlet) Location: Bronx, NY Posts: 907 Thanks: 172 Thanked 386 Times in 177 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	are there going to be cables available at dyno day sat? __________________

09-18-2012, 10:35 AM	#1382
Opposed Senior Member Join Date: Jun 2012 Drives: 2013 Asphalt FR-S Location: Bloomington, MN Posts: 1,156 Thanks: 499 Thanked 447 Times in 294 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	I want to hear about the "there's more" Part Good news none the less, thanks for the update. __________________ Asphalt FR-S: EcuTek Visconti STG2 tune, MAPerformance turbo kit, MAPerformance 3" exhaust, Hotchkis springs, Mach-V 17x9 Awesomes. Build thread: http://www.ft86club.com/forums/showthread.php?t=30703

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 03:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) — General Topics	0	05-24-2012 11:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 08:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) — General Topics	130	09-01-2011 02:42 PM

09-18-2012, 02:18 AM	#1373
Visconti Banned Join Date: Apr 2012 Drives: 05 STi Location: Norwalk, CT Posts: 2,843 Thanks: 196 Thanked 3,188 Times in 1,197 Posts Mentioned: 375 Post(s) Tagged: 2 Thread(s)	Nope that helps Can't keep track of all this stuff Thanks !

09-18-2012, 10:18 AM	#1377
Visconti Banned Join Date: Apr 2012 Drives: 05 STi Location: Norwalk, CT Posts: 2,843 Thanks: 196 Thanked 3,188 Times in 1,197 Posts Mentioned: 375 Post(s) Tagged: 2 Thread(s)	Good morning! It's a great day for all BRZ/FRS owners -EcuTek Update Time!! - -Speed Density is up and running! -Auto blip is working! -Map Switching is now easier - RPM Tac now indicates which map your on by pointing to 1k, 2k, 3k, 4k when changing maps! -Over boost fuel cut is now available for forced induction guys! Oh First shipment of ProECU cables have been shipped out ! There's more John

09-18-2012, 10:31 AM	#1381
#87 I usually post drunk Join Date: Oct 2009 Drives: BRZ Location: NY Posts: 1,487 Thanks: 15 Thanked 490 Times in 231 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Please vid of auto blip as soon as you can, that's what i've been waiting for

User Name		Remember Me?
Password