New 3D laser scanner and printer what to make? - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Grishbok · 09-14-2012, 01:11 PM

does the printer have a heated build plate? If so, you can build taller with higher resolution without the base warping. If thats the case theres some really slick builds out there. I would suggest using that scanner on a Tamiya FRS model car and see if you can reproduce it.

An 86 logo for that center consol blank button would be pretty sweet

SpeedR · 09-14-2012, 03:27 PM

I will laser scan consol blank button area this week.

whateatsrabbits · 09-14-2012, 07:46 PM

Print a gun.
http://defensedistributed.com/

Floggin Tires · 09-14-2012, 08:03 PM

Quote:

Originally Posted by SpeedR

Just got a new 3D laser scanner a few days ago and our first 3D printer comes in today.
What do you think any good ideas?

Honestly.
Testing it out.
No Homo.
It I would make a D!CK n ballz 1st thing.
Why not?

Spaceywilly · 09-14-2012, 08:33 PM

Something to go in the center console to replace the cup holders. I'm surprised nobody has made it yet.

oso_25 · 09-14-2012, 09:20 PM

was bored so here is a quick idea for that center blank panel spot was going to do the 86 emblem design but due to some copy right laws I just wrote it out . Anyways I can see these with subaru symbol and Sti or BRZ at the bottom also

diirk · 09-15-2012, 12:46 AM

That looks great. Nice work.

oso_25 · 09-15-2012, 01:45 AM

Does the brz have a blank panel spot also? Maybe I will design for s**t and giggles tomorrow maybe put some more design work into that one

86_ZN6 · 09-15-2012, 02:41 AM

Quote:

Originally Posted by oso_25

Does the brz have a blank panel spot also? Maybe I will design for s**t and giggles tomorrow maybe put some more design work into that one

empty on the premium

switches for the heated seats on the limited

[es vi: eks] · 09-15-2012, 04:14 AM

What kinda 3D printer did you get? been thinking of getting one to do a bit of model making with

#87 · 09-15-2012, 04:16 AM

Quote:

Originally Posted by oso_25

was bored so here is a quick idea for that center blank panel spot was going to do the 86 emblem design but due to some copy right laws I just wrote it out . Anyways I can see these with subaru symbol and Sti or BRZ at the bottom also

I've an idea, make it with holes that will fit the emblems and people can add what they like (subaru, scion, toyota)

Rossman · 09-15-2012, 10:41 AM

Quote:

Originally Posted by oso_25

was bored so here is a quick idea for that center blank panel spot was going to do the 86 emblem design but due to some copy right laws I just wrote it out . Anyways I can see these with subaru symbol and Sti or BRZ at the bottom also

The shape of that doesn't really look right, thing about that indent is that the sides aren't simply straight like that, there is a bevel on at the top so you're going to get a little "trench" around your fill piece...

oso_25 · 09-15-2012, 10:52 AM

Quote:

Originally Posted by Rossman

The shape of that doesn't really look right, thing about that indent is that the sides aren't simply straight like that, there is a bevel on at the top so you're going to get a little "trench" around your fill piece...

It was a quick design I did not take any measurements to make it fit the panel. Wish I had the money to buy that printer

would be making these right now

Tanuki · 09-15-2012, 10:52 AM

I have the full file to for the iron man suits from Iron Man 1-3

I was thinking something for that ugly open space on the center console as well. Great minds think alike.

09-14-2012, 01:11 PM	#29
Grishbok Volunteer Fire and Rescue Join Date: Jul 2012 Drives: Ambulance... sideways. Location: No. VA Posts: 546 Thanks: 97 Thanked 350 Times in 166 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	does the printer have a heated build plate? If so, you can build taller with higher resolution without the base warping. If thats the case theres some really slick builds out there. I would suggest using that scanner on a Tamiya FRS model car and see if you can reproduce it. An 86 logo for that center consol blank button would be pretty sweet __________________ It's more fun to drive a slow car fast, than a fast car slow.

09-14-2012, 08:33 PM	#33
Spaceywilly ZC6A2B82KC7J Join Date: May 2011 Drives: 2002 WRX Location: Providence, RI Posts: 1,632 Thanks: 361 Thanked 727 Times in 236 Posts Mentioned: 6 Post(s) Tagged: 0 Thread(s)	Something to go in the center console to replace the cup holders. I'm surprised nobody has made it yet. __________________ Straights are for fast cars. Turns are for fast drivers.

09-15-2012, 04:14 AM	#38
[es vi: eks] Senior Member Join Date: Mar 2010 Drives: Subaru Legacy Location: NZ, Christchurch, The Shakey Isles Posts: 322 Thanks: 41 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	What kinda 3D printer did you get? been thinking of getting one to do a bit of model making with __________________ I'm sick of these mother f*ing earthquakes on these mother f*ing plains.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Someone please make this pedal	#87	Cosmetic Modification (Interior/Exterior/Lighting)	55	12-28-2018 04:38 PM
What radar/laser detectors do you use?	sa1126	Electronics \| Audio \| NAV \| Infotainment	131	12-16-2013 09:39 PM
Canadians using radar detectors & laser jammers	Lo	CANADA	0	01-30-2012 10:29 AM

09-14-2012, 03:27 PM	#30
SpeedR First86 / boat thief Join Date: Jan 2012 Drives: MKIV Supra Location: OKC Posts: 306 Thanks: 147 Thanked 119 Times in 43 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I will laser scan consol blank button area this week.

09-15-2012, 10:52 AM	#42
Tanuki Turtle Factory Join Date: Oct 2009 Drives: Mint M3 Location: PDX Posts: 1,286 Thanks: 1,021 Thanked 613 Times in 312 Posts Mentioned: 9 Post(s) Tagged: 1 Thread(s)	I have the full file to for the iron man suits from Iron Man 1-3 I was thinking something for that ugly open space on the center console as well. Great minds think alike.

User Name		Remember Me?
Password