Accelerated Performance 2013 BRZ - FRS Turbo Kit Designing - Page 160 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Don@Accelerated · 08-17-2012, 11:11 AM

Quote:

Originally Posted by blackfireball5

Might have something to do with the Dyno graph on the first few pages of this thread. maybe he should throw the most recent one up there?

I'll just start a new thread

Don@Accelerated · 08-17-2012, 11:12 AM

Quote:

Originally Posted by Synack

Sigh, as my build pictures are coming out, more people who have heard the original results of Don's turbo are talking smack. Seems like the only numbers floating around are the original 215whp @3psi that you guys had. I have to keep telling people 285whp @8spi with the basic kit. Let alone a more advanced kit.

Who's doing your kit? Where are the pictures!

Don@Accelerated · 08-17-2012, 11:18 AM

ECUTek and John Visconti have given me launch control to test with the turbo setup!

On its basic out of the box configuration I was able to reach 4-5psi at 4000rpm!

jadewbj · 08-17-2012, 11:39 AM

Quick question.

You say that it makes 290WHP with the "Basic kit" but I am still not sure if that is with or without ECU because you say it "uses factory injectors and ecu" but then say "the tuning is provided via ecutek".

Just trying to clear it up because we are having a discussion here about best bang for your buck mods. Does the kit make 290WHP for the $4,995 plus $750 install or is there a cost involved for the tune?

Thanks!

Don@Accelerated · 08-17-2012, 11:42 AM

ECUtek is on the factory ecu. You need to purchase it from ECUtek via John Visconti.

The factory by itself cannot control the boost alone.

Synack · 08-17-2012, 11:45 AM

Quote:

Originally Posted by Don@Accelerated

More advanced kit? The 290hp setting is still the basic kit, we just needed a little more injector to go further.

Yeah and then even more power to come with that and bigger exhaust pieces etc. People are way too quick to judge.

civicdrivr · 08-17-2012, 12:11 PM

Have pictures been posted of the cold air kit?

Synack · 08-17-2012, 12:57 PM

Quote:

Originally Posted by Don@Accelerated

Who's doing your kit? Where are the pictures!

Click my sig. We're in the process of parts coming in the mail right now. Nothing extremely exciting.

Silverdub · 08-17-2012, 08:07 PM

Question here that might of been asked before. Are you able to keep the windshieldwasher bottle with the piping going in that tight corner on the drivers side?

Don@Accelerated · 08-17-2012, 08:10 PM

Quote:

Originally Posted by Silverdub

Question here that might of been asked before. Are you able to keep the windshieldwasher bottle with the piping going in that tight corner on the drivers side?

The stock piece does not stay. I give you another with relocation brackets.

Don

Silverdub · 08-17-2012, 08:28 PM

Thanks for the quick answer!

Don@Accelerated · 08-17-2012, 09:14 PM

Quote:

Originally Posted by civicdrivr

Have pictures been posted of the cold air kit?

No. I had it on mine for a short period, but then had to cut it up for a turbo kit I sold. I need to pop together another. I just hate taking the bumper off.

skatery1989 · 08-17-2012, 09:22 PM

Don't know if this has been asked but when is the kit available?

Sportsguy83 · 08-17-2012, 09:33 PM

Quote:

Originally Posted by skatery1989

Don't know if this has been asked but when is the kit available?

Its been available for quite a while now....

08-17-2012, 12:11 PM	#2233
civicdrivr Senior Member Join Date: Mar 2012 Drives: 2018 Golf R Location: Richmond, VA Posts: 2,807 Thanks: 5,386 Thanked 1,095 Times in 647 Posts Mentioned: 68 Post(s) Tagged: 7 Thread(s)	Have pictures been posted of the cold air kit? __________________ Parting out HERE

08-17-2012, 08:07 PM	#2235
Silverdub Boostin' Join Date: Jun 2012 Drives: FRS-T Location: Montreal Posts: 1,042 Thanks: 337 Thanked 489 Times in 241 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Question here that might of been asked before. Are you able to keep the windshieldwasher bottle with the piping going in that tight corner on the drivers side? __________________ My custom turbo build up thread!

08-17-2012, 08:28 PM	#2237
Silverdub Boostin' Join Date: Jun 2012 Drives: FRS-T Location: Montreal Posts: 1,042 Thanks: 337 Thanked 489 Times in 241 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Thanks for the quick answer! __________________ My custom turbo build up thread!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Accelerated Performance 2013 BRZ Intake Dyno Testing Video	Don@Accelerated	Engine, Exhaust, Transmission	109	05-17-2013 12:24 PM
Accelerated Performance 2013 BRZ Exhaust Systems	Don@Accelerated	Engine, Exhaust, Bolt-Ons	135	09-04-2012 12:24 AM
Accelerated Performance 2013 BRZ/FRS Exhaust Systems	Don@Accelerated	Engine, Exhaust, Bolt-Ons	24	07-07-2012 08:05 AM
Hello from Accelerated Performance!	Don@Accelerated	Announcements, Contests, Giveaways	5	07-04-2012 09:14 PM

08-17-2012, 11:18 AM	#2229
Don@Accelerated Join Date: Jun 2012 Drives: 2013 BRZ Location: Toledo Ohio Posts: 880 Thanks: 6 Thanked 1,162 Times in 316 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	ECUTek and John Visconti have given me launch control to test with the turbo setup! On its basic out of the box configuration I was able to reach 4-5psi at 4000rpm!

08-17-2012, 11:42 AM	#2231
Don@Accelerated Join Date: Jun 2012 Drives: 2013 BRZ Location: Toledo Ohio Posts: 880 Thanks: 6 Thanked 1,162 Times in 316 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	ECUtek is on the factory ecu. You need to purchase it from ECUtek via John Visconti. The factory by itself cannot control the boost alone.

08-17-2012, 09:22 PM	#2239
skatery1989 Senior Member Join Date: Jul 2012 Drives: BRZ Limited Location: Colorado Posts: 193 Thanks: 53 Thanked 173 Times in 63 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Don't know if this has been asked but when is the kit available?

User Name		Remember Me?
Password