Nameless Performance BRZ Axleback Exhaust - Page 10 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

sparks · 08-14-2012, 03:20 PM

Quote:

Originally Posted by ayau

very nice. ups is delivering mine today. were the 2 bolts holding the stock axle back hard to remove?

Not at all, but then again I've swapped in my Nameless Performance muffler delete (the race pipe) a few times

Hardest part is getting the exhaust hangers to let go of the suit case.

UncleFester · 08-14-2012, 03:35 PM

Quote:

Originally Posted by sparks

Not at all, but then again I've swapped in my Nameless Performance muffler delete (the race pipe) a few times

Hardest part is getting the exhaust hangers to let go of the suit case.

I had the same issue with the hangers. I ended up spraying them with WD40 lithium grease and haven't had any issues since.

xjohnx · 08-14-2012, 03:37 PM

For you guys who have installed the overpipe replacement piece that requires jacking the motor up a couple inches, how hard was the install? how long did it take you?

Nate219BRZ · 08-14-2012, 08:47 PM

Quote:

Originally Posted by Luke.Cariveau

Loving the exhaust.

hosting images

image host

picture hosting

Do you get the nameless sticker with the exhaust?

Luke.Cariveau · 08-14-2012, 10:06 PM

Quote:

Originally Posted by Nate219BRZ

Do you get the nameless sticker with the exhaust?

Yea, I had the guys at nameless throw it on!

Luke.Cariveau · 08-14-2012, 10:07 PM

Quote:

Originally Posted by Tainen

Nameless did some measurements and confirmed it will fit.

also in that vid above, that's a cold start right? That sounds like it's not at idle, but cold idle RPMs. At full idle it's really quiet.

Yes, that was a cold start, it is a lot louder until you move slightly and it quiets down a lot.

ayau · 08-14-2012, 11:32 PM

just installed my nameless axle back. as expected, it's a lot lighter than the oem suit case.

it's quieter than i thought, but it should get louder once the packing materials in the muffler break-in.

overall, the quality is top notch, and i love how it was hand-built by someone in a shop.

Tainen · 08-15-2012, 12:10 AM

Quote:

Originally Posted by ayau

just installed my nameless axle back. as expected, it's a lot lighter than the oem suit case.

it's quieter than i thought, but it should get louder once the packing materials in the muffler break-in.

overall, the quality is top notch, and i love how it was hand-built by someone in a shop.

trust me, it's a great trait, because you'll want to add a downpipe and headers later.

ayau · 08-15-2012, 01:13 AM

Quote:

Originally Posted by Tainen

trust me, it's a great trait, because you'll want to add a downpipe and headers later.

so are you still running the pre-prod headers? when is nameless going to release it into prod? will you be doing a full tune once the ecu flashing is released to the public?

Tainen · 08-15-2012, 03:38 AM

Quote:

Originally Posted by ayau

so are you still running the pre-prod headers? when is nameless going to release it into prod? will you be doing a full tune once the ecu flashing is released to the public?

yep, still running the headers. still no CEL.

Not sure on release dates, I know they just bought a new cold saw to help in header production though. Not sure on tune, I might wait for other options to come out, it depends on a few different variables.

boarder1995 · 08-16-2012, 09:38 AM

My full header back system is "awaiting shipment"! Wonder when it'll actually go out? They indicated about 1 1/2 week turnaround on a system, plus I'm having them add a Helmholtz resonator for possible future headers. Really would like to get this on before the next C&C. Come on exhaust - really looking forward to this.

xjohnx · 08-16-2012, 10:02 AM

Quote:

Originally Posted by boarder1995

My full header back system is "awaiting shipment"! Wonder when it'll actually go out? They indicated about 1 1/2 week turnaround on a system, plus I'm having them add a Helmholtz resonator for possible future headers. Really would like to get this on before the next C&C. Come on exhaust - really looking forward to this.

What date did you order?

boarder1995 · 08-16-2012, 10:19 AM

Quote:

Originally Posted by xjohnx

What date did you order?

Just the 14th. 2 days ago. I'm not impatient or anything.

xjohnx · 08-16-2012, 10:50 AM

Quote:

Originally Posted by boarder1995

Just the 14th. 2 days ago. I'm not impatient or anything.

FWIW, I ordered on the 9th and am looking at mid next week for shipping. You probably won't be far behind.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BRZ performance driving demo - looks great	Oriental Life	BRZ Photos, Videos, Wallpapers, Gallery Forum	26	04-11-2012 02:20 AM
What type of performance parts will you be looking to buy first?	bFreed	Engine, Exhaust, Transmission	12	11-09-2011 05:51 PM
Performance automatics	madfast	Engine, Exhaust, Transmission	118	08-25-2011 03:26 AM
FT-86 Article on Performance magazine	4agze	Scion FR-S / Toyota 86 GT86 General Forum	7	01-09-2010 11:33 AM

08-14-2012, 03:37 PM	#129
xjohnx Grip>Slip Join Date: Jun 2012 Drives: 13 SWP BRZ Ltd - Innovate Powered! Location: RVA Posts: 3,563 Thanks: 656 Thanked 1,717 Times in 1,031 Posts Mentioned: 45 Post(s)	For you guys who have installed the overpipe replacement piece that requires jacking the motor up a couple inches, how hard was the install? how long did it take you?

08-14-2012, 11:32 PM	#133
ayau Senior Member Join Date: Nov 2011 Drives: Some rust bucket Location: Polar ice cap Posts: 3,058 Thanks: 312 Thanked 1,046 Times in 556 Posts Mentioned: 37 Post(s)	just installed my nameless axle back. as expected, it's a lot lighter than the oem suit case. it's quieter than i thought, but it should get louder once the packing materials in the muffler break-in. overall, the quality is top notch, and i love how it was hand-built by someone in a shop.

08-16-2012, 09:38 AM	#137
boarder1995 Senior Member Join Date: Jun 2012 Drives: 2013 Subie BRZ Limited, black, 6MT Location: Texas Posts: 125 Thanks: 38 Thanked 22 Times in 16 Posts Mentioned: 2 Post(s)	My full header back system is "awaiting shipment"! Wonder when it'll actually go out? They indicated about 1 1/2 week turnaround on a system, plus I'm having them add a Helmholtz resonator for possible future headers. Really would like to get this on before the next C&C. Come on exhaust - really looking forward to this.

User Name		Remember Me?
Password