|
DIY (Do-It-Yourself) Guides For all DIYs. |
|
Thread Tools | Search this Thread |
04-02-2021, 03:50 PM | #99 |
Senior Member
Join Date: Mar 2018
Drives: Toyota 86 GT Limited PP (Model G)
Location: Italy
Posts: 1,023
Thanks: 406
Thanked 341 Times in 190 Posts
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
|
I'd need to remove the knee airbag from the EU version, do you know what is the correct value of the resistance? Can I measure it with a multimeter?
And, more important, what if the ECU should send the ignition current because of an accident? The wires are almost in short circuit.... |
04-02-2021, 08:12 PM | #100 |
Senior Member
Join Date: Oct 2013
Drives: BRZ, Noble M400, AC-LS7,1956 AC
Location: Wi/Fl
Posts: 1,022
Thanks: 328
Thanked 867 Times in 471 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
Be very carful putting a multimeter across the terminals. Some have an inrush current.
Put a fuse inline with the resistor. You are in an accident that will deploy the air bag and are worried about burning out a resistor? |
04-03-2021, 03:28 AM | #101 |
Senior Member
Join Date: Mar 2018
Drives: Toyota 86 GT Limited PP (Model G)
Location: Italy
Posts: 1,023
Thanks: 406
Thanked 341 Times in 190 Posts
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
|
Thanks, not worried for burning out the resistor, but the whole airbag cable...
|
12-05-2022, 12:58 PM | #102 |
Member
Join Date: May 2022
Drives: 2023 BRZ
Location: Yorktown, VA
Posts: 41
Thanks: 0
Thanked 2 Times in 2 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Has anyone tried the Recaro universal resistor instead of the Bride or just putting a resistor into the connector? It looks much cleaner if it works.
https://www.vividracing.com/recaro-u...152867045.html |
12-05-2022, 02:09 PM | #103 | |
Member
Join Date: Oct 2022
Drives: 2013 FRS
Location: Riverside County
Posts: 86
Thanks: 37
Thanked 37 Times in 29 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Very curious to see what you find.
__________________
|
|
12-07-2022, 12:38 PM | #104 |
Member
Join Date: May 2022
Drives: 2023 BRZ
Location: Yorktown, VA
Posts: 41
Thanks: 0
Thanked 2 Times in 2 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Yeah, I still have no idea where the 2.2 or 3.3 Ohm value came from. I measured the driver's side plug resistance to be like 0.4 Ohms.
|
12-07-2022, 12:38 PM | #105 | |
Member
Join Date: May 2022
Drives: 2023 BRZ
Location: Yorktown, VA
Posts: 41
Thanks: 0
Thanked 2 Times in 2 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Quote:
|
|
12-14-2022, 04:40 AM | #106 |
STX 188
|
Resistor worked, tho.
__________________
|
12-22-2022, 09:43 PM | #107 |
Member
Join Date: May 2022
Drives: 2023 BRZ
Location: Yorktown, VA
Posts: 41
Thanks: 0
Thanked 2 Times in 2 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
No. I reached out to recaro and the connector isn't the same. I bought the NRG resistor and it worked fine.
https://getnrg.com/products/srk-res |
12-23-2022, 04:15 PM | #108 |
Senior Member
Join Date: Aug 2015
Drives: None
Location: Arizona
Posts: 937
Thanks: 1,501
Thanked 1,258 Times in 537 Posts
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
|
The SRS light can be turned off on the dash via CAN... I don't know what would happen if the SRS module was still in the car when this was done though
The CAN ID is 372, for anyone looking to sniff quick. EPAS light can also be turned off via CAN.
__________________
|
12-24-2022, 01:15 AM | #109 |
Senior Member
Join Date: Jun 2018
Drives: MR2, Sliver BRZ
Location: San Diego, CA
Posts: 305
Thanks: 5
Thanked 255 Times in 118 Posts
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
|
having two can ID can interfere and multiple devices can throw a error. if you have the airbag module disconnected then it should work. but doesn't fix if you want the rest of the SRS system to keep working properly. wont also fix the issue of the passenger occupancy sensor either though.
__________________
Always looking to tinker with something..
|
The Following User Says Thank You to geraldjust For This Useful Post: | RedReplicant (12-24-2022) |
12-26-2022, 11:39 AM | #110 |
Member
Join Date: Nov 2022
Drives: Frankenstein of parts
Location: Vancouver
Posts: 14
Thanks: 0
Thanked 23 Times in 11 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
If you look carefully inside, you'll notice theres a shorting bar. When the connector is unplugged that bar shorts the two pins as a precaution from people trying to explode airbags. 3.3 Ohms is also wrong, as someone who did do that had bad probes. However, that being said, any 1/4w resistor between 1.8 and 3.3ohm will do the trick.
|
The Following User Says Thank You to Nmstec For This Useful Post: | RedReplicant (12-26-2022) |
12-26-2022, 11:45 AM | #111 | |
Member
Join Date: Nov 2022
Drives: Frankenstein of parts
Location: Vancouver
Posts: 14
Thanks: 0
Thanked 23 Times in 11 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Every vehicles SRS logic will still attempt to fire the airbags, even if they are disconnected. If the Occupancy sensor fails, it resorts to looking at the passenger side buckle. If Buckled, explode. Address and data for turning SRS light off (gerald is right, don't just flood the message, either MITM it, or disable SRS module all together.) 0x372 {0x00, 0xYY, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; Where YY is a counter, 00 - F0. Rolls over, starts at 00. Last edited by Nmstec; 12-26-2022 at 12:35 PM. |
|
The Following User Says Thank You to Nmstec For This Useful Post: | RedReplicant (12-26-2022) |
03-18-2024, 08:05 AM | #112 |
Senior Member
Join Date: Jan 2013
Drives: 13' DGM Built FBM BRZ
Location: Silver Spring, Maryland
Posts: 1,280
Thanks: 761
Thanked 250 Times in 195 Posts
Mentioned: 31 Post(s)
Tagged: 1 Thread(s)
|
Opening up this thread.. Anyone have updated pictures or a write up for this? I have my stock limited brz seats, what gets transferred over, all the wiring inside?
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Light Weight Seats | sw20kosh | Tracking / Autocross / HPDE / Drifting | 23 | 11-06-2012 11:15 PM |
Aftermarket Seats sets off SRS light? | Hanakuso | Cosmetic Modification (Interior/Exterior/Lighting) | 1 | 08-25-2012 05:09 PM |
Risk Racing Light Mine Professional Magneti - Magnetic mini light fixture! | DjDATZ | Off-Topic Lounge [WARNING: NO POLITICS] | 0 | 06-28-2012 11:21 AM |
FR-S / BR-Z Racing Seats!!! | vividracing | Interior Parts (Incl. Lighting) | 8 | 06-19-2012 08:07 PM |