Random Thoughts - Part III The Search for Spark (No Politics) - Page 629 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Lantanafrs2 · 09-10-2023, 03:12 PM

Cv?

spike021 · 09-10-2023, 03:20 PM

Just spent a few mins driving more.

It does happen in neutral and when stopped when I rev to about 2500-3000rpm. In lower gears it happens more between 2000-3000.

Above 3k I don't notice it.

Usually I shift around that range... could it be transmission related?

Car sounds fine if just idling and it's pulling and stuff fine while accelerating.

Sapphireho · 09-10-2023, 09:29 PM

Suddenly this afternoon I became a sewing machine restorer. My wife couldn't not get this from an elderly lady who put this out front for free. It didn't spin.

5 minutes with 5 in 1 oil and got it going.

1942.

My wife is super exited. Hope I can time it.

Ultramaroon · 09-10-2023, 09:53 PM

Should clean out all the old oil before the varnish sets up again. Might as well if you're already re-timing it.

Sapphireho · 09-10-2023, 10:02 PM

Quote:

Originally Posted by Ultramaroon

Should clean out all the old oil before the varnish sets up again. Might as well if you're already re-timing it.

There is no old oil. Just joints that need regular oil in the main shaft. Many joints were seized. Sprayed with brake cleaner and oil, then oil 10 more times spinning. Motor runs well. Going to put it back in tomorrow.

I have no idea how to re-time it.

Right now I have the motor out and soaking the rubber wheel that turns the main shaft.

Interesting machine.

Ultramaroon · 09-10-2023, 10:15 PM

Yeah. Many people used 3-in-1 oil to lube them. It becomes like glue when it varnishes. Real sewing machine oil is pure mineral oil. No plant-based stuff. wd40 thins the 3-in-1 varnish but eventually evaporates. edit... I missed the part where you said you cleaned and lubed a bunch of times. It sounds like you cleaned it all out.

soundman98 · 09-10-2023, 11:06 PM

There's been a couple machines like that at goodwill lately. But all the rubber is either missing or so cracked and dry rotted and about to go missing.

I've still got a snow blower I need to fix up. Needs new fuel lines and a carb, then it's a housewarming gift to a friend.

Sapphireho · 09-10-2023, 11:15 PM

Quote:

Originally Posted by Ultramaroon

Yeah. Many people used 3-in-1 oil to lube them. It becomes like glue when it varnishes. Real sewing machine oil is pure mineral oil. No plant-based stuff. wd40 thins the 3-in-1 varnish but eventually evaporates. edit... I missed the part where you said you cleaned and lubed a bunch of times. It sounds like you cleaned it all out.

Actually, I used this.

Ultramaroon · 09-11-2023, 12:31 AM

Quote:

Originally Posted by Sapphireho

Actually, I used this.

I guess if you're ok with the off-brand stuff...

Kaotic Lazagna · 09-11-2023, 06:46 AM

Quote:

Originally Posted by spike021

Just spent a few mins driving more.

It does happen in neutral and when stopped when I rev to about 2500-3000rpm. In lower gears it happens more between 2000-3000.

Above 3k I don't notice it.

Usually I shift around that range... could it be transmission related?

Car sounds fine if just idling and it's pulling and stuff fine while accelerating.

A heat shield some how came loose perhaps?

spcmafia · 09-11-2023, 07:42 AM

Quote:

Originally Posted by spike021

Just spent a few mins driving more.

It does happen in neutral and when stopped when I rev to about 2500-3000rpm. In lower gears it happens more between 2000-3000.

Above 3k I don't notice it.

Usually I shift around that range... could it be transmission related?

Car sounds fine if just idling and it's pulling and stuff fine while accelerating.

It almost sounds like a defective pulley. Could be a pump too.

Sapphireho · 09-11-2023, 11:11 AM

Quote:

Originally Posted by Ultramaroon

I guess if you're ok with the off-brand stuff...

Singer vintage sewing machine oil is off-brand?

My wife now has 3 sewing machines. She also got my mom's Singer 401.

Sapphireho · 09-11-2023, 12:48 PM

The cattle panel worked great. We did tomatoes on it. I'm going to get a couple more next season for beans and peas.

NoHaveMSG · 09-11-2023, 01:03 PM

I ended up with a 900lb motorcycle in my shop for repair. Been sitting for like 8-9 years. Transmission howl. Hopefully just a clutch but I heard 4 gear is weak in these.

09-10-2023, 09:29 PM	#8795
Sapphireho Famous Potatoes Join Date: Mar 2016 Drives: '15 ultramarine Location: Idaho Posts: 14,049 Thanks: 5,816 Thanked 19,655 Times in 9,246 Posts Mentioned: 163 Post(s) Tagged: 0 Thread(s)	Suddenly this afternoon I became a sewing machine restorer. My wife couldn't not get this from an elderly lady who put this out front for free. It didn't spin. 5 minutes with 5 in 1 oil and got it going. 1942. My wife is super exited. Hope I can time it. Attached Images

09-10-2023, 09:53 PM	#8796
Ultramaroon not playing cards Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 32,395 Thanks: 53,053 Thanked 37,228 Times in 19,308 Posts Mentioned: 1118 Post(s) Tagged: 9 Thread(s)	Should clean out all the old oil before the varnish sets up again. Might as well if you're already re-timing it. __________________ service manuals

09-10-2023, 10:15 PM	#8798
Ultramaroon not playing cards Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 32,395 Thanks: 53,053 Thanked 37,228 Times in 19,308 Posts Mentioned: 1118 Post(s) Tagged: 9 Thread(s)	Yeah. Many people used 3-in-1 oil to lube them. It becomes like glue when it varnishes. Real sewing machine oil is pure mineral oil. No plant-based stuff. wd40 thins the 3-in-1 varnish but eventually evaporates. edit... I missed the part where you said you cleaned and lubed a bunch of times. It sounds like you cleaned it all out. __________________ service manuals

09-10-2023, 11:06 PM	#8799
soundman98 ProCrastinationConsultant Join Date: Sep 2013 Drives: '14 Ranger, '18 Tacoma 4Dr LB Location: chicago-ish Posts: 11,330 Thanks: 35,240 Thanked 13,676 Times in 6,782 Posts Mentioned: 98 Post(s) Tagged: 0 Thread(s)	There's been a couple machines like that at goodwill lately. But all the rubber is either missing or so cracked and dry rotted and about to go missing. I've still got a snow blower I need to fix up. Needs new fuel lines and a carb, then it's a housewarming gift to a friend. __________________ "The time you enjoy wasting is not wasted time"

09-11-2023, 12:48 PM	#8805
Sapphireho Famous Potatoes Join Date: Mar 2016 Drives: '15 ultramarine Location: Idaho Posts: 14,049 Thanks: 5,816 Thanked 19,655 Times in 9,246 Posts Mentioned: 163 Post(s) Tagged: 0 Thread(s)	The cattle panel worked great. We did tomatoes on it. I'm going to get a couple more next season for beans and peas. Attached Images

09-10-2023, 03:12 PM	#8793
Lantanafrs2 Senior Member Join Date: Jan 2018 Drives: 2013 frs red Location: South Florida Posts: 3,576 Thanks: 2,587 Thanked 3,140 Times in 1,689 Posts Mentioned: 6 Post(s) Tagged: 1 Thread(s)	Cv?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Random Thoughts - Part Deux [NO POLITICS]	Ultramaroon	Off-Topic Lounge [WARNING: NO POLITICS]	84004	03-07-2022 12:00 PM
OEM BRZ spark plug part number?	qqzj	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	3	05-27-2017 12:33 AM
Random thoughts thread	MrVito	Off-Topic Lounge [WARNING: NO POLITICS]	37188	02-25-2016 11:00 AM
Random search on bing	sdwagonjp	Off-Topic Lounge [WARNING: NO POLITICS]	11	11-19-2014 08:35 PM

User Name		Remember Me?
Password