Doorstops are in. - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Falkon240 · 12-02-2022, 02:52 PM

This was the cheapest place online I could find them.

https://www.subaruoempartsonline.com...001?origin=pla

A pair was about $75 shipped to me

Qwimby1 · 12-03-2022, 01:45 PM

Changed mine today. Easy job. The usual door panel remove plus three screws that hold the speaker in. HUGE improvement.

norcalpb · 12-03-2022, 03:34 PM

Are you guys putting 2nd gen door checks into your 1st gens, or just replacing them with another factory part?

blsfrs · 12-04-2022, 10:14 PM

Quote:

Originally Posted by norcalpb

Are you guys putting 2nd gen door checks into your 1st gens, or just replacing them with another factory part?

It is my understanding that they are later Gen 1 parts. Might be the same as Gen 2.

Qwimby1 · 12-05-2022, 12:08 PM

The part number on the one I just bought from my local Toyota dealer is SU003-07368. If there's a later one I'd like to know. I don't know how long my new one will hold up but I'd even settle for installing a new one every 6 months if I had to. It's worth it. I think I read that it can be very hard to slide the detentes through the channel when shimming the old ones. I'm not sure you'd have to do that, though.

Qwimby1 · 12-05-2022, 12:13 PM

Toyota parts just told me the one I bought fits models up to 20.

norcalpb · 12-05-2022, 02:18 PM

Quote:

Originally Posted by Qwimby1

The part number on the one I just bought from my local Toyota dealer is SU003-07368. If there's a later one I'd like to know. I don't know how long my new one will hold up but I'd even settle for installing a new one every 6 months if I had to. It's worth it. I think I read that it can be very hard to slide the detentes through the channel when shimming the old ones. I'm not sure you'd have to do that, though.

Just looked it up again and I guess some people did successfully install the 2022 door stops. They have much deeper channels than the 13-20 versions, potentially making it a plug and play option that you don’t need to shim.

https://www.reddit.com/r/ft86/commen...tm_name=iossmf

Falkon240 · 12-05-2022, 03:24 PM

Going to be a guinea pig and see how the 2nd gen fit. Bought them from here for less than $62 shipped https://www.subarupartscorp.com/p/10...1124CC000.html

blsfrs · 12-05-2022, 03:52 PM

IT looks like Toyota and Subaru have a different part number for the same part.

norcalpb · 12-05-2022, 04:47 PM

Quote:

Originally Posted by Qwimby1

The part number on the one I just bought from my local Toyota dealer is SU003-07368. If there's a later one I'd like to know. I don't know how long my new one will hold up but I'd even settle for installing a new one every 6 months if I had to. It's worth it. I think I read that it can be very hard to slide the detentes through the channel when shimming the old ones. I'm not sure you'd have to do that, though.

Quote:

Originally Posted by blsfrs

IT looks like Toyota and Subaru have a different part number for the same part.

Correct, it looks like:

22 BRZ = 61124CC000
GR86 = SU00308681

Falkon240 · 12-15-2022, 01:09 PM

Did the door stay swap with the GT86 door stop yesterday super easy 30-minute install if you don't know what you're doing.

For reference, my garage is on a very minimal decline and my doors would close on me anytime I was working on the interior with the door open.

After the installation, the door has 3 different positions that will hold the door in place and not close from the weight of the door.

I recommend this part for an improved quality of life in a 2013 FRS with 50k miles!

euniqe · 12-16-2022, 01:38 AM

Quote:

Originally Posted by Falkon240

Did the door stay swap with the GT86 door stop yesterday super easy 30-minute install if you don't know what you're doing.

For reference, my garage is on a very minimal decline and my doors would close on me anytime I was working on the interior with the door open.

After the installation, the door has 3 different positions that will hold the door in place and not close from the weight of the door.

I recommend this part for an improved quality of life in a 2013 FRS with 50k miles!

which part number did you use?

Falkon240 · 12-16-2022, 01:28 PM

Quote:

Originally Posted by euniqe

which part number did you use?

Quote:

Originally Posted by Falkon240

Going to be a guinea pig and see how the 2nd gen fit. Bought them from here for less than $62 shipped https://www.subarupartscorp.com/p/10...1124CC000.html

I bought it from the website in the quote, the PN is 61124CC00

blsfrs · 12-16-2022, 05:17 PM

Quote:

Originally Posted by Falkon240

Did the door stay swap with the GT86 door stop yesterday super easy 30-minute install if you don't know what you're doing.

For reference, my garage is on a very minimal decline and my doors would close on me anytime I was working on the interior with the door open.

After the installation, the door has 3 different positions that will hold the door in place and not close from the weight of the door.

I recommend this part for an improved quality of life in a 2013 FRS with 50k miles!

My left door check has been in about a month and I still grin when I have to put actual effort into closing the door, even on an incline.

12-02-2022, 02:52 PM	#15
Falkon240 Member Join Date: Oct 2022 Drives: 2013 FRS Location: Riverside County Posts: 87 Thanks: 37 Thanked 38 Times in 30 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	This was the cheapest place online I could find them. https://www.subaruoempartsonline.com...001?origin=pla A pair was about $75 shipped to me __________________ IG 2013 Scion FR-S 2022 Chevrolet Colorado ZR2 Bison 1998 Nissan 240SX KA24DET

12-05-2022, 03:24 PM	#22
Falkon240 Member Join Date: Oct 2022 Drives: 2013 FRS Location: Riverside County Posts: 87 Thanks: 37 Thanked 38 Times in 30 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Going to be a guinea pig and see how the 2nd gen fit. Bought them from here for less than $62 shipped https://www.subarupartscorp.com/p/10...1124CC000.html __________________ IG 2013 Scion FR-S 2022 Chevrolet Colorado ZR2 Bison 1998 Nissan 240SX KA24DET

12-15-2022, 01:09 PM	#25
Falkon240 Member Join Date: Oct 2022 Drives: 2013 FRS Location: Riverside County Posts: 87 Thanks: 37 Thanked 38 Times in 30 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Did the door stay swap with the GT86 door stop yesterday super easy 30-minute install if you don't know what you're doing. For reference, my garage is on a very minimal decline and my doors would close on me anytime I was working on the interior with the door open. After the installation, the door has 3 different positions that will hold the door in place and not close from the weight of the door. I recommend this part for an improved quality of life in a 2013 FRS with 50k miles! __________________ IG 2013 Scion FR-S 2022 Chevrolet Colorado ZR2 Bison 1998 Nissan 240SX KA24DET

12-03-2022, 01:45 PM	#16
Qwimby1 Senior Member Join Date: Nov 2015 Drives: 14 FRS Monogram, 05 Mazdasped Miata Location: Sarasota, FL Posts: 599 Thanks: 139 Thanked 150 Times in 110 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Changed mine today. Easy job. The usual door panel remove plus three screws that hold the speaker in. HUGE improvement.

12-03-2022, 03:34 PM	#17
norcalpb Senior Member Join Date: Oct 2013 Drives: 2013 BRZ, 2023 Model 3 Location: SF Bay Area Posts: 2,341 Thanks: 1,254 Thanked 899 Times in 589 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Are you guys putting 2nd gen door checks into your 1st gens, or just replacing them with another factory part?

12-05-2022, 12:08 PM	#19
Qwimby1 Senior Member Join Date: Nov 2015 Drives: 14 FRS Monogram, 05 Mazdasped Miata Location: Sarasota, FL Posts: 599 Thanks: 139 Thanked 150 Times in 110 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	The part number on the one I just bought from my local Toyota dealer is SU003-07368. If there's a later one I'd like to know. I don't know how long my new one will hold up but I'd even settle for installing a new one every 6 months if I had to. It's worth it. I think I read that it can be very hard to slide the detentes through the channel when shimming the old ones. I'm not sure you'd have to do that, though.

12-05-2022, 12:13 PM	#20
Qwimby1 Senior Member Join Date: Nov 2015 Drives: 14 FRS Monogram, 05 Mazdasped Miata Location: Sarasota, FL Posts: 599 Thanks: 139 Thanked 150 Times in 110 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Toyota parts just told me the one I bought fits models up to 20.

12-05-2022, 03:52 PM	#23
blsfrs Senior Member Join Date: Dec 2018 Drives: 2013 frs base Location: central Virginia Posts: 1,428 Thanks: 2,637 Thanked 1,421 Times in 676 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	IT looks like Toyota and Subaru have a different part number for the same part.

User Name		Remember Me?
Password