2023 BRZ fitment - APEX ARC-8 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

red_door · 11-27-2022, 02:31 PM

Hey all,

I have a 2023 BRZ that is bone stock and is just my daily driver. I'm loving APEX's ARC-8 and want to put them on my car. I'm assuming the 17x9 +42 fitment is the best? I want to do zero modification in terms of spacers, fender, camber, ride height, etc. - basically I want a bolt on fit with no issues - is this possible with those wheels and 235/40/17 Advan Fleva V701?

Thanks!

DarkPira7e · 11-27-2022, 02:50 PM

The wheels were made to be near perfect fitment at this size. It'll be great. On stock suspension, they fit my car well but my 245/45 tires were close to stock spring perches, 235/40 should be great

red_door · 11-27-2022, 02:57 PM

Quote:

Originally Posted by DarkPira7e

The wheels were made to be near perfect fitment at this size. It'll be great. On stock suspension, they fit my car well my but 245/45 tires were close to stock spring perches

Thanks for your input - do you know if it's any different on the 2nd gens? I've heard the fitment choices are worse and I don't want to order them based on info from the first gens.

DarkPira7e · 11-27-2022, 03:05 PM

Quote:

Originally Posted by red_door

Thanks for your input - do you know if it's any different on the 2nd gens? I've heard the fitment choices are worse and I don't want to order them based on info from the first gens.

Very good point. This is from the Apex website for the 17x9 ARC-8

- Front & Rear: 17x9" ET42
  - Available in: ARC-8
  - These wheels typically do not require any spacer. However, if additional negative camber has been dialed in at the knuckle, a 5mm front spacer may be needed.
  - Depending on tire size/model and how negative camber is achieved, shaving the inner lip on the rear quarter panel may be required

Source - https://support.apexraceparts.com/hc...-Fitment-Guide

Will_ · 11-28-2022, 12:16 AM

On stock suspension, the rear clearance will be fine with a 235 section tire. The only issue I’d worry about is the front clearance on the spring perch, however if you are not adding camber via camber bolts then it shouldn’t be a problem.

I run ARC-8s on my GR86 with no spacers, however I do have coilovers and some other suspension modifications.

DarkSunrise · 11-28-2022, 01:43 AM

No issues with those wheels and 235/40/17 tires. You’ll have about 9 mm clearance to the front sprint perch on stock camber on a tire like the gt radial champiro sx2. A little bit of poke.

11-27-2022, 02:31 PM	#1
red_door Member Join Date: Jan 2022 Drives: 2023 BRZ, 1990 Miata Location: Utah Posts: 14 Thanks: 1 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	2023 BRZ fitment - APEX ARC-8 Hey all, I have a 2023 BRZ that is bone stock and is just my daily driver. I'm loving APEX's ARC-8 and want to put them on my car. I'm assuming the 17x9 +42 fitment is the best? I want to do zero modification in terms of spacers, fender, camber, ride height, etc. - basically I want a bolt on fit with no issues - is this possible with those wheels and 235/40/17 Advan Fleva V701? Thanks!

11-27-2022, 02:50 PM	#2
DarkPira7e Rust bucket enthusiast Join Date: Feb 2017 Drives: 2013 Turbo Firestorm FRS Location: Vermont Posts: 4,064 Thanks: 3,323 Thanked 4,210 Times in 2,116 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	The wheels were made to be near perfect fitment at this size. It'll be great. On stock suspension, they fit my car well but my 245/45 tires were close to stock spring perches, 235/40 should be great __________________ Turbo FR-S Build - Build Thread JDL EL Recirc manifold, Boostlab BL58x Turbo w/ T51R, 17x9 ARC-8, IAG block Last edited by DarkPira7e; 11-27-2022 at 03:17 PM.

11-28-2022, 12:16 AM	#5
Will_ Member Join Date: Jul 2022 Drives: '23 GR86 Neptune PMT Location: SF Bay Area Posts: 84 Thanks: 21 Thanked 100 Times in 47 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	On stock suspension, the rear clearance will be fine with a 235 section tire. The only issue I’d worry about is the front clearance on the spring perch, however if you are not adding camber via camber bolts then it shouldn’t be a problem. I run ARC-8s on my GR86 with no spacers, however I do have coilovers and some other suspension modifications. Attached Images

11-28-2022, 01:43 AM	#6
DarkSunrise Senior Member Join Date: Apr 2012 Drives: 22 BRZ (Previously 13 FR-S) Location: USA Posts: 5,798 Thanks: 2,187 Thanked 4,243 Times in 2,221 Posts Mentioned: 48 Post(s) Tagged: 2 Thread(s)	No issues with those wheels and 235/40/17 tires. You’ll have about 9 mm clearance to the front sprint perch on stock camber on a tire like the gt radial champiro sx2. A little bit of poke. Attached Images __________________ "Never run out of real estate, traction, and ideas at the same time." 2022 BRZ Build 2013 FR-S Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2023 G87 BMW M2	Kiske	Other Vehicles & General Automotive Discussions	65	10-18-2022 06:19 PM
2023 Production	autosenses	BRZ Second-Gen (2022+) — General Topics	28	05-19-2022 04:52 PM
► APEX \| Subaru BRZ tS Track Car Featuring APEX 17" ARC-8 Wheels	APEX Race Parts	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	9	02-02-2021 01:59 AM
► APEX \| Tire Slayer LS2 Powered FRS - Featuring APEX ARC-8 Wheels	APEX Race Parts	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	5	12-02-2019 02:03 AM
► APEX \| Tire Slayer LS2 Powered FRS - Featuring APEX ARC-8 Wheels	APEX Race Parts	Tracking / Autocross / HPDE / Drifting	2	11-30-2019 01:17 AM

User Name		Remember Me?
Password