NORCAL: Local Marketplace Buy/Sell

[derekguy123]

Hi everybody, I have a set of OEM brz, frs, 86, 2017+ tail lights. All lights are fully functional. They are in near perfect condition, even the original seals are clean and not ripped. No broken tabs on the back either. Asking $SOLD, but am open to offers. Local meet up only. Please contact me with any questions or offers!

[derekguy123]

Hi everybody, I have an OEM manifold/header from my 2014 BRZ. They were removed at 42,000 miles and only used with the stock tune. The catalytic converter is in perfect condition. Selling because I'm a risk taker, haha. Asking $OLD, but am flexible on the price. Please contact me with any questions or offers. Local meet up only.

[Chris_]

JDL UEL Catless Header, Ceramic Coated $SOLD
---------------

Cusco Adjustable Front Strut Tower Brace SOLD

--------------

SuperPro Front and Rear Sway Bars $250

• 22mm Front Bar: RC0015FZ-22
• 20mm Rear Bar: RC0015RZ-20
• Used for ~1500 miles
• Located in South San Francisco, can also meet around Mountain View.
• Buyer pays shipping

---------------------

ACE A350 Header SOLD

[waifu_zn6]

bump

Originally Posted by waifu_zn6

Hello, im looking to sell my wing for $400 or trade for a CF duckbill close to the same value.




I'm located in the Sacramento area, but if youre in the bay area, we can meet halfway.

[SmartedPanda]

Anyone got tail lights? Ideally Tom's RED or Valenti REVO.
Willing to take 2017+ OEM too.

[DCdesign2000]

Originally Posted by cool

Selling Gram Lights 57Xtreme wheels 18x9.5 +40 offset 5x100 bolt pattern.
The wheels are in excellent condition with no curb rash. The tires need to be replaced.
Includes Rays center caps and TPMS sensors.
$1100 OBO. Pick up in the east bay area.

Hi,
Wondering if you can show pictures of the wheel from different angles so I can see how deep +40 is.
Do I need any modification to the car to run with these wheels?
Going from 215/45/17 to 255/35/18, your tires seemed to have uneven wear, do you know why?
Did they rub against the fender well at all?

Thanks!

[kuczynskika]

Wish I was doing this under better circumstances, but here goes... totaled my car recently and I have a lot of rare, high-quality STI JDM parts (imported from Japan) that are up for sale to a good home.

Check out what I have here. Happy to add more pictures. Located in Reno, Nevada, and happy to do meet-ups in the bay/norcal for the large items. Buyer adds some $$$ for shipping.



FOR SALE:

STI ts GT Carbon Fiber Wing - $1500
(Imported from Japan) 1 of 3 known in the states. Excellent condition, but with some wear. You will need to get new mounting hardware. The Subaru part number you need is: E7210CA101 see link for part details.





Subaru BRZ Premium Trunk - $300
No holes, no wing mounting. Ready for you to install. Has some nicks and scratches.





Varis Arising I Carbon Fiber Hood - $1500
Imported from Japan by Evasive Motors. The Hood is painted in 2014 world rally blue and has a FULL clear bra. Comes with removable rain guards and pre-installed aero latches.







Forged Pro Drives (18+8.5+40 front | 18x9.5+40 rear) - $1700
With Michelin Pilot Sport 4S's[/B] 245 front tires | 265 rear tires. These were bought from the original owner as silver. I powder coated them gloss black. Could use a new powder coating. Comes with TPMS sensors, but will need reprogramming.





STI ts JDM Front Bumper Shrouds/Accents/LED Dayliner Cover Extensions - $150
Imported from Japan parts. Has a full matte clear bra overlay. The clear bra has some damage and nicks but excellent condition underneath. Will need new 3M sticky tape for mounting. Comes with original mounting instructions and templates.





APR Carbon Fiber Canards - (13-16 BRZ) - $250
Comes with mounting hardware. Canards have a full layer of clear bra - 100% protected and in perfect shape.





Crystal Cylica Black Radio Antenna - $80
Perfect for that JDM look.

[96z2]

WTB 2017+ BRZ OEM PP Wheels. Looking for at least 2, may buy whole set. Bay Area. Thanks!

[kuczynskika]

Originally Posted by kuczynskika

Wish I was doing this under better circumstances, but here goes... totaled my car recently and I have a lot of rare, high-quality STI JDM parts (imported from Japan) that are up for sale to a good home.

Check out what I have here. Happy to add more pictures. Located in Reno, Nevada, and happy to do meet-ups in the bay/norcal for the large items. Buyer adds some $$$ for shipping.



FOR SALE:

STI ts GT Carbon Fiber Wing - $1500
(Imported from Japan) 1 of 3 known in the states. Excellent condition, but with some wear. You will need to get new mounting hardware. The Subaru part number you need is: E7210CA101 see link for part details.





Subaru BRZ Premium Trunk - $300
No holes, no wing mounting. Ready for you to install. Has some nicks and scratches.





Varis Arising I Carbon Fiber Hood - $1500
Imported from Japan by Evasive Motors. The Hood is painted in 2014 world rally blue and has a FULL clear bra. Comes with removable rain guards and pre-installed aero latches.







Forged Pro Drives (18+8.5+40 front | 18x9.5+40 rear) - $1700
With Michelin Pilot Sport 4S's[/B] 245 front tires | 265 rear tires. These were bought from the original owner as silver. I powder coated them gloss black. Could use a new powder coating. Comes with TPMS sensors, but will need reprogramming.





STI JDM Tower Strut Bar - $250
Used but in good condition.





STI ts JDM Front Bumper Shrouds/Accents/LED Dayliner Cover Extensions - $150
Imported from Japan parts. Has a full matte clear bra overlay. The clear bra has some damage and nicks but excellent condition underneath. Will need new 3M sticky tape for mounting. Comes with original mounting instructions and templates.



JDM Clear Side Markers - $50
Great condition with all mounting tabs intact.



APR Carbon Fiber Canards - $250
Comes with mounting hardware. Canards have a full layer of clear bra - 100% protected and in perfect shape.





Crystal Cylica Black Radio Antenna - $80
Perfect for that JDM look.



Radium Master Cylinder Brace - $30

Bump!

[slipstream8]

FS: Wedssport TC105N 17x9 ET35 in hypersilver with Yokohama Advan Neova AD08R 245/40R17, 7/32 tread depth.

Wheels and tires have 5,000 miles over four years of very light use. Includes centering rings but no TPMS.

I sold my 2017 PP BRZ, and just took delivery of a new 2022. Unfortunately this wheel offset does not work with the new generation BRZ. I love this wheel design.

$1600 --> SOLD

[1future]

For sale:

-New Subaru OEM BRZ STI SIDE SKIRT (Driver side only) - $100

[G_Ride]

I recently sold my 2013 BRZ and waiting for my new one to arrive, and I have a few items left over from the old car I don't plan on using.

I'm located in Campbell but depending on the item I'd be willing to ship (extra) or meet you somewhere between our locations.

Titanium axleback - $450
It was made by ISR Performance back when the twins first came out: https://www.ft86club.com/forums/show...iNv-YZ2kjBqtaw

It directly bolts up to the 13-16 stock midpipe. For 17-20 twins the 13-16 midpipe is required, but I do have an extra midpipe I'll include for free.



Whiteline rear lower control arms $120
The offset inner bushings which I didn't like were replaced with delrin bushings.



Trunk Box Tray $40
I had this ordered from Japan since the cars here didn't get it and I had taken out my spare tire. This tray goes where the spare tire is located and it was pretty useful.

[kuczynskika]

Originally Posted by kuczynskika

Wish I was doing this under better circumstances, but here goes... totaled my car recently and I have a lot of rare, high-quality STI JDM parts (imported from Japan) that are up for sale to a good home.

Check out what I have here. Happy to add more pictures. Located in Reno, Nevada, and happy to do meet-ups in the bay/norcal for the large items. Buyer adds some $$$ for shipping.



FOR SALE:

STI ts GT Carbon Fiber Wing - $1400
(Imported from Japan) 1 of 3 known in the states. Excellent condition, but with some wear. You will need to get new mounting hardware. The Subaru part number you need is: E7210CA101 see link for part details.





Subaru BRZ Premium Trunk - $300
No holes, no wing mounting. Ready for you to install. Has some nicks and scratches.





Varis Arising I Carbon Fiber Hood - $1400
Imported from Japan by Evasive Motors. The Hood is painted in 2014 world rally blue and has a FULL clear bra. Comes with removable rain guards and pre-installed aero latches.







Forged Pro Drives (18+8.5+40 front | 18x9.5+40 rear) - $1700
With Michelin Pilot Sport 4S's[/B] 245 front tires | 265 rear tires. These were bought from the original owner as silver. I powder coated them gloss black. Could use a new powder coating. Comes with TPMS sensors, but will need reprogramming.





STI ts JDM Front Bumper Shrouds/Accents/LED Dayliner Cover Extensions - $150
Imported from Japan parts. Has a full matte clear bra overlay. The clear bra has some damage and nicks but excellent condition underneath. Will need new 3M sticky tape for mounting. Comes with original mounting instructions and templates.



APR Carbon Fiber Canards - (13-16 BRZ) - $250
Comes with mounting hardware. Canards have a full layer of clear bra - 100% protected and in perfect shape.





Crystal Cylica Black Radio Antenna - $80
Perfect for that JDM look.

Bump

[Clipdat]

Does anyone want an OEM FR-S front pipe for free picked up in Alameda? Not sure if people want or have any use for these.


This thing (not my photo):