What did you do to your 2nd gen BRZ today?

[Simmons]

I did my alignment last night after installing the MCS.

This gen seems to have more rear camber then the 1st gen.

[rawpoly]

Originally Posted by Yoshoobaroo

lol and here am I contemplating getting 17s for my limited so I can put primacies on!

Ha ha.
Primacies do have their uses. I like to break loose now and then but they are bad for every other use case.

[Yoshoobaroo]

Originally Posted by Simmons

I did my alignment last night after installing the MCS.

This gen seems to have more rear camber then the 1st gen.

That makes sense, explains why it has more lateral grip in the rear.

[dsc_pat]

Originally Posted by Simmons

I did my alignment last night after installing the MCS.

This gen seems to have more rear camber then the 1st gen.

what are the specs ?I think you have stock front bolts and stock rear LCA. Thanks for sharing,

[Simmons]

Originally Posted by dsc_pat

what are the specs ?I think you have stock front bolts and stock rear LCA. Thanks for sharing,

I am lowered on MCS coil-overs. It is 2.4/2.8 rear camber. Font camber I can get -5.1 with the camber plates.

[Simmons]

I got my tint done yesterday.

[dsc_pat]

Originally Posted by Simmons

I am lowered on MCS coil-overs. It is 2.4/2.8 rear camber. Font camber I can get -5.1 with the camber plates.

Sounds about the same as 1st gen at your height. Lca is the same as 1st gen so camber gain under compression should not vary at all between both generation.

[joemysterio]

Originally Posted by PhatFreshPrince

The USB cables are around 6 feet or 2 meters long. I too am rethinking my phone placement. I drove to town today and did need to get it out of the glove box once. Maybe, I will get a dash phone holder for it. Maybe on that stick to the front windshield. What were you thinking of doing? I need ideas.

Not 100% sure just yet, since actually I won't have my BRZ for another 4 or 5 months, so I've been trying to look at interior pictures/videos to see if I can get some idea but nothing I'm fully satisfied with... The best I can come up with at the moment would be this pocket with velcro that I found on amazon, which I could secure to in the footwell area, about knee height. From pics it looks like it's carpeted so it should work. Do you have the limited or premium, maybe you can confirm for me real quick?

Aside from that, the next best thing would be a gooseneck arm phone mount and put it on the dashboard so it hangs to the left of the built-in display, kind of behind the windshield wiper wand/switch, out of the way a little but close enough to grab without stretching out toward the glove compartment.


Velcro pocket:
https://www.amazon.com/gp/product/B07NQD5D3C/

Gooseneck phone mount:
https://www.amazon.com/gp/product/B08HLNGHKX/

[rawpoly]

Originally Posted by Yoshoobaroo

lol and here am I contemplating getting 17s for my limited so I can put primacies on!

Update,
Track mode, first gear u turn, still can get it sideways easy enough even with the pilot sport 4s.

[grst1]

Ready for winter driving (perfect fit from previous generation-16” 205/55 Michelin Ice Snow) - just need snow ❄️!

[22 BRZ]

Just crossed over 1600km, oil change tomorrow, then time to open it up a bit. Was nice to increase the beep from 4k to 7k.

[PhatFreshPrince]

Originally Posted by joemysterio

Not 100% sure just yet, since actually I won't have my BRZ for another 4 or 5 months, so I've been trying to look at interior pictures/videos to see if I can get some idea but nothing I'm fully satisfied with... The best I can come up with at the moment would be this pocket with velcro that I found on amazon, which I could secure to in the footwell area, about knee height. From pics it looks like it's carpeted so it should work. Do you have the limited or premium, maybe you can confirm for me real quick?

Aside from that, the next best thing would be a gooseneck arm phone mount and put it on the dashboard so it hangs to the left of the built-in display, kind of behind the windshield wiper wand/switch, out of the way a little but close enough to grab without stretching out toward the glove compartment.


Velcro pocket:
https://www.amazon.com/gp/product/B07NQD5D3C/

Gooseneck phone mount:
https://www.amazon.com/gp/product/B08HLNGHKX/

It is plastic at knee-high. I was thinking about a phone holder that sticks to the windshield like this one.

https://www.amazon.com/dp/B092YNC894...lig_dp_it&th=1

[Sym]

Originally Posted by PhatFreshPrince

It is plastic at knee-high. I was thinking about a phone holder that sticks to the windshield like this one.

https://www.amazon.com/dp/B092YNC894...lig_dp_it&th=1

I wonder if a replacement brake boot with a pocket and a flap/magnetic closure would be possible and not look too out of place.

Like in this area:

[joemysterio]

Originally Posted by PhatFreshPrince

It is plastic at knee-high. I was thinking about a phone holder that sticks to the windshield like this one.

https://www.amazon.com/dp/B092YNC894...lig_dp_it&th=1

Ahh yeah, the carpeted area is lower but might be okay for me. As long as it holds well and is out of the way but easily reachable, I'll probably be fine. A window mount would be good too but I'm planning on having a dash cam so i don't want too much stuff on the windshield, you know?

@Sym the e-brake boot idea would be great, seems like there's enough space for at least a phone there.