SOCAL: Local FS/FT

[dwv619]

Toms V1 tail lights $370

Pick up in San Diego

[Xinnie]

Need a 2.75" 2 bolt gasket, can pick up in LA

[Thunder86]

Looking to purchase stock/OEM wheels & tires; good & safe condition only! Better condition = more money

Preferably 17-20 Toyota 86, but BRZ or FRS will work as well.

LOCATED IN SAN DIEGO

[jbetanc]

lower price bump

Originally Posted by jbetanc

Sold car, like new $700.00

FEATURES
A single mono tube shock absorber is adopted for all lineup
32 way adjustable damper rates
Ideal for both street or circuit use.
A large 44mm diameter piston is used (Some vehicles area excluded)
This damper can be overhauled to maintain prime condition.
STRUCTURE
A single mono tube design is adopted for the complete range. A large 44mm diameter low friction piston control initial damping, allowing a comfortable ride but a great driving response.

DRIVABILITY AND COMFORT
A 32 way damping rate is incorporated into both shock absorbers. With such a wide range of adjustable, driving performance and ride comfort are maintained at the highest level, even at low speed. Spring rate is setup for each vehicle. A comfortable ride can be achieved with the height adjustment function which allows enough stroke for any driving conditions.

STYLING
The spring sheet and upper mounts are finished in a red alumite. The brackets are finished in a classy matt black. The height adjustment function is shown in millimeters, allowing a wide range of setting to suit any driving conditions.

SETTING
Preload adjustment of the spring and the height can be adjusted separately. A variety of damping rates can be achieved through simple adjustment. Camber adjustment allows alignment to be set to personal preference.

DURABILITY
The cylinder case is finished in a black chrome overlay and the bracket is finished in a special point to improve durability and anti-corrosion.

[Butterballz]

Lots of brand new, track focused parts. Quality brands, no Mishimoto here.

Originally Posted by Butterballz

New never installed Raceseng tow strap in black.

$120 OBO, local pickup preferred in Socal. Not looking to ship right now.

Originally Posted by Butterballz

New Verus Engineering toe arm with ride height correction kit.

$300 OBO, local pickup preferred in Socal, not looking to ship right now.

Originally Posted by Butterballz

New, never mounted, 949racing 6ul 17x9 in bronze. Will include 8 valve stem. The other three look the same, seemed redundant to post them, but if you want them, I can upload them.

$1,000 OBO, local pickup preferred in Socal. Shipping costs will probably not make this worth it, will not adjust the price for shipping lol.

Originally Posted by Butterballz

New AIM MXM dash, uncut harness, various OBD2 pigtails included.

$1,100 firm, local pickup in Socal preferred. Not shipping at the moment.

Originally Posted by Butterballz

Used AP Racing Sprint Kit with used Hawk HPS front, new HPS rear pads. A new seal kit is included for one caliper - $800

The rotors are used with heat checking but are still good to use. Probably should get new hardware since the last guy probably reused them as he switched rotors.

Here's the deal with these for transparency. I bought them used and sent them to Essex Racing to be rebuilt. I was sent back the calipers with no notes of issues. Once installed, the driver-side caliper started to leak around one of the pistons, the passenger side was fine. I spent 3 weeks trying to get a shipping label from them as they said they would for them to check out the leak. They never sent a label and I don't have time to play games so that's where they are at. I drove on them for 3 days after rebuilt, uninstalled, and basically been in boxes since then.

I will include a seal kit for you to rebuild them. I don't have the time, energy, nor tools to do so myself.

$800 OBO, local pickup preferred in Socal.

[HachirocksU]

Originally Posted by whataboutbob

Bump, you have a PM.

Hey bob,
Got it. Will reply. Thank you!

[shanx]

WTB new/low mileage stock tires (Michelin Primacy HP). Located around LA.

[Decimus]

WTB: OEM INTAKE. Preferably the entire airbox with inlet and all the sound tube stuff. PM me what you have. Willing to drive around LA. Budget $100.

[downshiftxlr8]

Originally Posted by shanx

WTB new/low mileage stock tires (Michelin Primacy HP). Located around LA.

I have a set.

[jbetanc]

SOLD
bump

Originally Posted by jbetanc

[B]]

FEATURES
A single mono tube shock absorber is adopted for all lineup
32 way adjustable damper rates
Ideal for both street or circuit use.
A large 44mm diameter piston is used (Some vehicles area excluded)
This damper can be overhauled to maintain prime condition.
STRUCTURE
A single mono tube design is adopted for the complete range. A large 44mm diameter low friction piston control initial damping, allowing a comfortable ride but a great driving response.

DRIVABILITY AND COMFORT
A 32 way damping rate is incorporated into both shock absorbers. With such a wide range of adjustable, driving performance and ride comfort are maintained at the highest level, even at low speed. Spring rate is setup for each vehicle. A comfortable ride can be achieved with the height adjustment function which allows enough stroke for any driving conditions.

STYLING
The spring sheet and upper mounts are finished in a red alumite. The brackets are finished in a classy matt black. The height adjustment function is shown in millimeters, allowing a wide range of setting to suit any driving conditions.

SETTING
Preload adjustment of the spring and the height can be adjusted separately. A variety of damping rates can be achieved through simple adjustment. Camber adjustment allows alignment to be set to personal preference.

DURABILITY
The cylinder case is finished in a black chrome overlay and the bracket is finished in a special point to improve durability and anti-corrosion.

[pinoy_dorifto]

Ecutek Bluetooth OBD2 adapter with USB $220obo



emal me pinoy_dorifto@yahoo.com

[A3r0pusH]

For sale are the following, local pickup only near West LA:


Beat Sonic Backup Camera - $150
Comes with everything needed to install. Main harness is already connected together. I am a novice when it comes to installing parts. I did this in about an hour. Most of the time was spent trying to hide/ziptie the cable in the trunk.


Lug Nuts - $15
I don't remember what brand these were. They are tapered and used when I had RPF01s.


GMG Front License Plate Holder - $10
Fits perfect in the front tow hook area.


TRD Quick Shifter Kit - $50
This is the kit that is installed under the car.


Toyota Cabin Air Filter - $10
New

[dwv619]

VIS SS CF trunk for sale - $800

Pickup in San Diego

[jbetanc]

Originally Posted by jbetanc

Lower price bump

lowered price again!!!!!!!!!!!!