The Gen 2 Photo Thread - Page 7 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Jucostud · 11-16-2021, 12:52 AM

Speaking of fender vents...

ProGodLegend · 11-16-2021, 01:10 AM

Quote:

Originally Posted by Jucostud

Speaking of fender vents...

Nice, I have the fender garnish too but haven't installed it yet. Was it easy? I'm assuming you just clean and stick it on.

Sent from my Pixel 6 using Tapatalk

Jucostud · 11-16-2021, 01:18 AM

Extremely easy. I cleaned that area pretty good, pulled the backing off the tape, and stuck them on. It's pretty hard to screw it up, and the cleaning took all the time. Application took 30 seconds per side.

22 BRZ · 11-16-2021, 09:41 AM

Quote:

Originally Posted by Jucostud

Extremely easy. I cleaned that area pretty good, pulled the backing off the tape, and stuck them on. It's pretty hard to screw it up, and the cleaning took all the time. Application took 30 seconds per side.

What part is that? A vinyl or something else?

euroshowoff · 11-16-2021, 11:02 AM

hows the blind spot? is the rear pillar still in the way like the old gen? i remember having an issue lane changing peaking over my shoulder.

Jucostud · 11-16-2021, 12:48 PM

Quote:

Originally Posted by euroshowoff

hows the blind spot? is the rear pillar still in the way like the old gen? i remember having an issue lane changing peaking over my shoulder.

I don't have any issues

Jucostud · 11-16-2021, 12:50 PM

Quote:

Originally Posted by 22 BRZ

What part is that? A vinyl or something else?

here's a closer look for ya

groovymoonbear · 11-16-2021, 01:40 PM

Quote:

Originally Posted by Jucostud

here's a closer look for ya

How was the shipping experience? Take a while?

Jucostud · 11-16-2021, 03:40 PM

Quote:

Originally Posted by groovymoonbear

How was the shipping experience? Take a while?

Took like 2 days to receive it after shipped. It was backordered when I ordered, so had to wait a week or so.

Camilobrzts · 11-16-2021, 11:39 PM

Quote:

Originally Posted by Jucostud

here's a closer look for ya

From where did you order them?
Thank you

Jucostud · 11-17-2021, 12:52 AM

Quote:

Originally Posted by Camilobrzts

From where did you order them?
Thank you

Japanparts.com

Camilobrzts · 11-18-2021, 09:18 PM

Quote:

Originally Posted by Jucostud

Japanparts.com

Thank you

22 BRZ · 11-19-2021, 01:01 AM

Finally home and in my garage! Still waiting on winter tires, floor mats, and mud flaps, so it'll just be sitting still for a few more days as my street is pure ice right now (something the Primacy tire was not made for). That means proper pictures are a little ways away unfortunately...

Discoveries so far:
- Gen 1 badge overlays: the larger of them fits the rear badge pretty well, but the front badge on the Gen 2 is larger than any decals from Gen 1. Please excuse the crap installation and picture. Its cold outside and I had already spent a bunch of time pulling the rear seats out. Next I will have to measure the badges on our WRX to see if those overlays would fit better.
- Aftermarket anodized aluminum HVAC bezel covers for a 15-21 WRX are slightly too small to fit (it was a long shot - would have been cool if they fit).
- My car doesn't seem to have the small button in the glovebox for switching tire pressure sensors - AFAIK Subaru doesn't do these in Canada.

Fingat · 11-19-2021, 01:54 AM

Quote:

Originally Posted by 22 BRZ

Next I will have to measure the badges on our WRX to see if those overlays would fit better.

Let us know, I have a set of first gen ones waiting.

11-16-2021, 12:52 AM	#85
Jucostud Rookie Join Date: Oct 2021 Drives: '22 BRZ Premium MT6 Location: DFW Posts: 151 Thanks: 200 Thanked 156 Times in 55 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Speaking of fender vents... Attached Images

11-16-2021, 11:02 AM	#89
euroshowoff Senior Member Join Date: Apr 2013 Drives: 2015 Tacoma Location: VA Posts: 157 Thanks: 19 Thanked 32 Times in 27 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	hows the blind spot? is the rear pillar still in the way like the old gen? i remember having an issue lane changing peaking over my shoulder. __________________ "Bah Weep Granah Weep Nini Bong" Old: 2013 Arengto FR-S Current: 2015 Tacoma/2020 Sequoia Pro Future: 2022 CWP Limited Est Delivery 06/22

11-19-2021, 01:01 AM	#97
22 BRZ Senior Member Join Date: Oct 2021 Drives: 2022 Subaru BRZ 6MT IR Location: Canada Posts: 194 Thanks: 55 Thanked 164 Times in 86 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Finally home and in my garage! Still waiting on winter tires, floor mats, and mud flaps, so it'll just be sitting still for a few more days as my street is pure ice right now (something the Primacy tire was not made for). That means proper pictures are a little ways away unfortunately... Discoveries so far: - Gen 1 badge overlays: the larger of them fits the rear badge pretty well, but the front badge on the Gen 2 is larger than any decals from Gen 1. Please excuse the crap installation and picture. Its cold outside and I had already spent a bunch of time pulling the rear seats out. Next I will have to measure the badges on our WRX to see if those overlays would fit better. - Aftermarket anodized aluminum HVAC bezel covers for a 15-21 WRX are slightly too small to fit (it was a long shot - would have been cool if they fit). - My car doesn't seem to have the small button in the glovebox for switching tire pressure sensors - AFAIK Subaru doesn't do these in Canada. Attached Images __________________ 2022 BRZed, Red, Base, Manual, Simple

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Track Day Photo Thread	Dougboy	CANADA	36	06-06-2016 05:49 PM
Photo shop request thread	cjsporl1996	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	8	12-16-2013 05:32 PM
Most recent photo's of your BRZ / 86 /FR-S Thread	omgwtfbbqsauce	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	48	01-11-2013 04:42 PM
Invasion toNeptunes Net Photo thread	FRS_13	Southern California	5	12-17-2012 08:00 PM

11-16-2021, 01:18 AM	#87
Jucostud Rookie Join Date: Oct 2021 Drives: '22 BRZ Premium MT6 Location: DFW Posts: 151 Thanks: 200 Thanked 156 Times in 55 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Extremely easy. I cleaned that area pretty good, pulled the backing off the tape, and stuck them on. It's pretty hard to screw it up, and the cleaning took all the time. Application took 30 seconds per side.

User Name		Remember Me?
Password