Pedders Top Hats - Add camber without sacrificing wheel clearance - Page 3 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Vital · 03-31-2021, 10:33 PM

Quote:

Originally Posted by billstock67

Installed Pedders, along with B6 & Yellow springs. Front camber is L -1.34°, R -1.78°, without crash or camber bolts. Preloaded everything to maximum camber direction before tightening, to take advantage of normal clearances.

Would you be able to upload some pics? I just wanna see how the car looks with the B6 and RCE Yellows. TIA!

billstock67 · 03-31-2021, 10:37 PM

Quote:

Originally Posted by Vital

Would you be able to upload some pics? I just wanna see how the car looks with the B6 and RCE Yellows. TIA!

I'll try this weekend.

AndMsc · 09-06-2021, 07:57 AM

Is it possible to only gain camber with these? (Without caster gain)

BlueWhelan · 09-06-2021, 02:50 PM

Quote:

Originally Posted by AndMsc

Is it possible to only gain camber with these? (Without caster gain)

No.

Sent from my iPhone using Tapatalk

Calum · 09-06-2021, 02:57 PM

Quote:

Originally Posted by AndMsc

Is it possible to only gain camber with these? (Without caster gain)

A little more caster isn't a bad thing though. My FWD Golf RUNS more caster from the factory.

Sent from my Pixel 4a (5G) using Tapatalk

DarkSunrise · 09-07-2021, 12:05 AM

Quote:

Originally Posted by Calum

A little more caster isn't a bad thing though. My FWD Golf RUNS more caster from the factory.

Sent from my Pixel 4a (5G) using Tapatalk

Normally not, but I think it might make the EPS steering cut issue worse on our cars.

AndMsc · 09-07-2021, 06:01 AM

Do all GT86s have the EPS issue? Or only certain years? Mine's a MY01/2018.

churchx · 09-07-2021, 11:36 AM

Then you should have no problems. It was improved/fixed .. i don't recall when exactly, was it ~ MY2015 or MY2017 restyle, but your, as restyle one, shouldn't have it for certain.

86league · 09-07-2021, 12:19 PM

Quote:

Originally Posted by churchx

Then you should have no problems. It was improved/fixed .. i don't recall when exactly, was it ~ MY2015 or MY2017 restyle, but your, as restyle one, shouldn't have it for certain.

Think it was for the 2017s or later, I have a friend with a 2016 that has the EPS cut problem on track.

wparsons · 04-23-2022, 02:14 PM

For anyone that had these a while ago, how are they lasting? Holding up well a year+ later?

BlueWhelan · 04-23-2022, 04:47 PM

Quote:

Originally Posted by wparsons

For anyone that had these a while ago, how are they lasting? Holding up well a year+ later?

Pulled em off because they weren’t legal in my class, but they held up great! Highly recommended

I still have the set

Sent from my iPhone using Tapatalk

7 skulls · 04-23-2022, 04:56 PM

Quote:

Originally Posted by wparsons

For anyone that had these a while ago, how are they lasting? Holding up well a year+ later?

I've had them on since 2020. No problems so far. About 20 000km.

dasting · 04-27-2022, 07:07 AM

Yeah, 18 months, a few track days, and about 15k street miles and they’re still good as new.

churchx · 04-27-2022, 07:36 AM

With generally positive experiences, makes me think, why it was so hard for whiteline to get it right in past.

09-06-2021, 07:57 AM	#31
AndMsc Member Join Date: Jun 2019 Drives: MY2018 GT86 EU Location: Cluj Posts: 74 Thanks: 44 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Is it possible to only gain camber with these? (Without caster gain) Last edited by AndMsc; 09-06-2021 at 08:41 AM.

04-27-2022, 07:07 AM	#41
dasting Member Join Date: May 2020 Drives: 2013 BRZ Limited Location: NJ Posts: 43 Thanks: 7 Thanked 31 Times in 15 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Yeah, 18 months, a few track days, and about 15k street miles and they’re still good as new. __________________ 2013 BRZ Limited, NASA Instructor, ex-spec miata racer

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pedders top hats and subaru camber bolts... results.	7 skulls	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	58	02-01-2021 07:24 PM
Pedders Top Hat w/ Camber & Caster Offset - Anyone with experience?	Jamestl	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	18	11-16-2018 05:35 PM
FS: RCE T2 Coilovers w/RCE Camber Plates and MSI Top Hats	jprice130	Brakes, Suspension, Chassis	4	09-23-2016 10:36 PM
FS: Robispec rear top hats, OEM front top hats, Scion wheel caps, OEM coin holder	MyRx	Brakes, Suspension, Chassis	5	10-12-2014 03:14 PM

09-07-2021, 06:01 AM	#35
AndMsc Member Join Date: Jun 2019 Drives: MY2018 GT86 EU Location: Cluj Posts: 74 Thanks: 44 Thanked 5 Times in 5 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Do all GT86s have the EPS issue? Or only certain years? Mine's a MY01/2018.

09-07-2021, 11:36 AM	#36
churchx Senior Member Join Date: Mar 2015 Drives: 2014 GT86 Location: Latvia, Riga Posts: 4,334 Thanks: 698 Thanked 2,086 Times in 1,436 Posts Mentioned: 53 Post(s) Tagged: 1 Thread(s)	Then you should have no problems. It was improved/fixed .. i don't recall when exactly, was it ~ MY2015 or MY2017 restyle, but your, as restyle one, shouldn't have it for certain.

04-27-2022, 07:36 AM	#42
churchx Senior Member Join Date: Mar 2015 Drives: 2014 GT86 Location: Latvia, Riga Posts: 4,334 Thanks: 698 Thanked 2,086 Times in 1,436 Posts Mentioned: 53 Post(s) Tagged: 1 Thread(s)	With generally positive experiences, makes me think, why it was so hard for whiteline to get it right in past.

User Name		Remember Me?
Password