2017 BRZ STi Front Lip DIY

[mkodama]

Big thanks to Johan and justinco. Quick and easy install, fitment is great, and mounting is very strong.

TIP: Use a 1/8” and 3/8” PLASTIC drill bits instead of the other sizes recommended; plastic drill bits have a more acute angle at the tip which leaves a nicer hole in plastic, is easier to keep aligned, and is more controllable. You can also skip the in-between drill size when using plastic drill bits.

[Eggbrz]

does anyone know of a link to obtain instruction sheet for sti side skirts, front lip, and rear bumper? thanks

[johan]

Originally Posted by Eggbrz

does anyone know of a link to obtain instruction sheet for sti side skirts, front lip, and rear bumper? thanks

I never found one for the 2017+ front lip, hence why I made this thread.

For the rear bumper diffuser, that's here: https://subaruonlineparts.com/docs/E5610CA000.pdf

The rear spats: https://subaruonlineparts.com/docs/E5610CA100.pdf

Side skirts: https://subaruonlineparts.com/docs/E2610CA000.pdf

[SkoczuArtek]

Does anyone one knows if mounting parts (screws, pins) and templates are included in the kit itself or need to be bought separately? If separately - anyone has number of parts?

[justinco]

Looks like johan's photos disappeared. I attached some of mine below in case it helps others in the future for this DIY.

[sygfrid]

For the STI chicklet logo, does it sit flushed & embedded into the lip or does it look like it was stick onto it & protruding?

[justinco]

Originally Posted by sygfrid

For the STI chicklet logo, does it sit flushed & embedded into the lip or does it look like it was stick onto it & protruding?

It sticks up a little, not flush with the lip.