WHAT DID YOU DO TO YOUR BRZ TODAY?

[Capt Spaulding]

Originally Posted by AnalogMan

Thank you! The process you described sounds like it should have a noticeable improvement in noise levels. But all the layers also seem like it could meaningfully reduce trunk space!

I know, right? But the beauty of it is the materials are very thin and overwhelming majority of the volume they take up is in the voids behind the existing trim panels. I used an adhesive backed close cell foam product and attached it to the mass loaded vinyl. The resulting composite is 1/4 inch thick. It fits pretty easily behind the trim. The only measurable loss of trunk volume is the 1/4 inch MLV/CCF panel under the trunk carpet. The 1/4 inch, while measurable is, to me not noticeable.

It does add a bit of weight. I'd guess about 20 pounds in my case. I'm easily 30 pounds over weight - so maybe I'll use this as a reason to lose some weight. Or not.

edit: I didn't want to plug specific products so I didn't put any links (other than the name of the butyl mat) in the post. I you like, I'll be happy to give you those in a PM.

[Dadhawk]

Originally Posted by Tcoat

Not once was I ever bothered by noise, jarring, seat comfort, etc.
I will add the disclaimer though that for many years I drove very loud military vehicles, straight piped big block V8s, old (50s) cars with all steel interiors or rotted out shit boxes with soup can holding the exhaust together or worn out and outright broken suspensions so the FRS and 86 are like whisper quite, riding on a cloud luxury machines in comparison.
Anybody that thinks these things are noisy or bouncy inside never spent to in a jacked up 67 Dart!

Yea, the FRS is the quietest car I've ever daily driven.

[Sasquachulator]

Can anyone compare the loudness to a subcompact like a Yaris or compact like a Corolla?

The last time i test drove one of these i think iI was going 80-100km or something around there, and i didnt find it all that much louder than my other car (Honda fit?) at the time. When i get a chance i'll test drive the 2020 86 GT nearby and see for myself.

I never understood the sound complaints, interior quality complaints or the power complaints. IT was all on par with a compact car to me....
does that mean my expectations were too low, just right for this particular car, or i should have expected more because RACECAR!!!?

[Capt Spaulding]

I have driven many noisier cars and many quieter cars. My "06 F150 STX is quieter and my '73 Mercury Capri was noisier. My wife's '12 Camry SE V6 is marginally quieter. My particular yardstick for interior noise is conversation. Can I maintain a normal conversation in a normal tone of voice at 75-80 mph? In the BRZ that proved a bit difficult. So tried a number of potential solutions ranging from aviation intercom systems to sound insulation. The insulation seems to fit the bill.

Cars like this are canvases. Many of us use them as a foundation for something we think is greater. My motorcycling career ended in the side of a Tahoe. When I bought the BRZ, I sold my wife on the idea by telling her it would be like a Honda Goldwing with doors and A/C. A decent road tripper with sporting pretensions. A budget GT car. And, so it is. For me, the noise isn't really a significant inconvenience. I would, however, like to carry on normal conversation and I find that over the course of 9 or so hours the noise is a bit fatiguing. It is, however, something I can mitigate. So I have. For my purposes, the car is better as as a result.

[valette.aglm@gmail.com]

I have just ordered same nice aluminium valve caps for my GT86 from this site
https://jdm-best.com/products/valve-caps-laser-blue-alu

Hopefully it goes well, what you guys think about the style of it?

[soundman98]

Originally Posted by valette.aglm@gmail.com

I have just ordered same nice aluminium valve caps for my GT86 from this site


Hopefully it goes well, what you guys think about the style of it?

Be sure to use anti-seize on them. Aluminum valve caps can and will seize onto the valvestem, making it impossible to add air to the tire

[StraightOuttaCanadaEh]

Yep happened to me

[Breadman]

finished flocking my bezel and installed the gauges

[JD001]

Originally Posted by AnalogMan

Because of the pandemic, I haven't driven my BRZ very much in the past year (the timing couldn't have been worse, I bought it November 2019).

So, hankering to break the self-imposed house arrest just a little, thanks to vaccinations we decided to take a little trip. Yesterday we drove the BRZ. 7 hours, for a little getaway on the Canadian border (since the Canucks won't let us in).

The first hour was exhilarating. Even just on the highway, it reminded me all over again why I bought and love this car. The second hour was almost as much pure fun.

After the third hour, it started to get a little... tiring. After 7 hours, the noise and jittery ride were a little... much (at least for this 60-something aging body).

I guess sometimes, there can be too much of a good thing. I think future drives will be limited to no more than 3 hours a day. The car is an absolute blast to drive. But it's not the best choice as a highway cruiser for long days.

How about anyone else? What's the longest ride you've taken your car on? And what's the longest ride for which it was honestly enjoyable?

Originally Posted by Tcoat

For the first 4 years with the FRS (on lowering springs and TRD exhaust) I spent between 15 and 20 hours a week on the highway. Now I am down to about 6 or 7 with the 86.
Not once was I ever bothered by noise, jarring, seat comfort, etc.
I will add the disclaimer though that for many years I drove very loud military vehicles, straight piped big block V8s, old (50s) cars with all steel interiors or rotted out shit boxes with soup can holding the exhaust together or worn out and outright broken suspensions so the FRS and 86 are like whisper quite, riding on a cloud luxury machines in comparison.
Anybody that thinks these things are noisy or bouncy inside never spent to in a jacked up 67 Dart!

Started a new job, going into my 3rd week, I will be getting a company car. As I haven't chosen my car yet, so have been given a rental that I have been driving to/from the office and visiting other site offices etc.. the rental is a new Ford Focus, sounds like a 3pot.. but not sure what it is, however, it's so anesthestised from the process of driving, no weight in the pedals, brakes are over sensitive, gearbox has no feel and no feedback through the steering. Yesterday jumped into my BRZeeee, wow!! What a difference! More connected to the road, rock solid stance, nice acceleration (sensitive too) and a very, very mechanical clutch/gearbox interface.

[EdBoy]

Installed intake manifold spacers/power blocks, not a bad mod for the price, changed the powerband a bit lower so i felt the low end once it was put in.
Got it off amazon for $60 and the crawford performance re install kit for $20 from their website directly.

[trigun286]

Saw my car get towed away to the body shop

Was in a wreck last year and the body shop never installed a brace that connects the front lower control arm frame stud to another point on the car. Never noticed as I don't generally look in that area. Rode like that for a year before the clunking. Stud is now free from the frame and the hole had gotten just big enough to cause some rattling. Body shop should be liable, I guess I'll see how it actually turns out.

[Stonehorsw]

Got the Brz with 22k miles, now it is with 23.6k miles. First oil change, used Motul 0w20

[2020BRZtS]

Installed the rear bumper applique. Tried to snap a pic but it's invisible.

[Stonehorsw]

Originally Posted by 2020BRZtS

Installed the rear bumper applique. Tried to snap a pic but it's invisible.

What is that?