Plastic Modeling - Page 61 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Kaotic Lazagna · 04-25-2021, 02:15 PM

Name: 20210425_111114.jpg
Views: 731
Size: 163.5 KB

Decided to not be lazy today and finish polishing the body. Burnt through the trunk a little, so resprayed it and lightly polished it. So it has some slight orange peel still, and some kind of clear coat bubble where the spoiler starts. Oh well.

Stephen W. · 04-25-2021, 03:02 PM

Quote:

Originally Posted by Tcoat

And loads and loads of equipment failures. < snip >

Like this Canadian Fairey Battle #1642 that was forced down just west of Oshawa Ontario due to a broken oil line. It's my understanding that my father took this photo. However, he didn't think to write anything down about it for decades.

Kiske · 04-25-2021, 09:52 PM

Lower cockpit details are done. Uppers, seats and pilots are base painted and on standby. Canopy also drying. I'd like to have her sealed by tomorrow night and moving on to the ordinance. I've got to clear some of the backlog.

Name: tomcockpit.jpg
Views: 872
Size: 157.5 KB

Name: tomcockpit.jpg
Views: 872
Size: 157.5 KB

soundman98 · 04-25-2021, 10:57 PM

it's not as impressive as the other work in this thread, but is technically plastic modeling.

it used to be a $5 bluetooth speaker. now it's a $105 bluetooth speaker that's been 3 years in the making. took the last 2 months to work, re-work, and acoustically engineer individual internal enclosures(made from oxi-clean cups) for the speakers, and get it all to look like nothing changed outside.

i should've taken pictures of the inside, but got distracted trying to get it done.

it functions, but it being only a 5 watt amp, it doesn't get as loud as i'd prefer. i'm considering alternatives to get it louder.

Tcoat · 04-26-2021, 09:23 AM

Quote:

Originally Posted by Kiske

Lower cockpit details are done. Uppers, seats and pilots are base painted and on standby. Canopy also drying. I'd like to have her sealed by tomorrow night and moving on to the ordinance. I've got to clear some of the backlog.

Attachment 200080
Beautiful!

Attachment 200081

Quote:

Originally Posted by soundman98

it's not as impressive as the other work in this thread, but is technically plastic modeling.

it used to be a $5 bluetooth speaker. now it's a $105 bluetooth speaker that's been 3 years in the making. took the last 2 months to work, re-work, and acoustically engineer individual internal enclosures(made from oxi-clean cups) for the speakers, and get it all to look like nothing changed outside.

i should've taken pictures of the inside, but got distracted trying to get it done.

it functions, but it being only a 5 watt amp, it doesn't get as loud as i'd prefer. i'm considering alternatives to get it louder.

1:1 scale.

nextcar · 04-26-2021, 06:37 PM

Worth a watch for the techniques...

Kaotic Lazagna · 04-28-2021, 08:21 PM

Well, some super glue shot out and landed on the bumper. BAH. Also, some more Aoshima quality annoyances. The rear taillight housing (chrome part) didn't fit well. Actually ended up cracking the paint as seen on the right side. The front headlight housing didn't even light up to the bumper (can see through the body because of the gap).

JD001 · 04-29-2021, 02:41 AM

Quote:

Originally Posted by Kaotic Lazagna

Well, some super glue shot out and landed on the bumper. BAH. Also, some more Aoshima quality annoyances. The rear taillight housing (chrome part) didn't fit well. Actually ended up cracking the paint as seen on the right side. The front headlight housing didn't even light up to the bumper (can see through the body because of the gap).

Don't you wish they made the ECUs to scale!!!

Kaotic Lazagna · 04-29-2021, 05:46 AM

Quote:

Originally Posted by JD001

Don't you wish they made the ECUs to scale!!!

haha, that switch is small enough as is. I end up toggling 3 switches when I'm just trying to turn on one thing lol

soundman98 · 04-29-2021, 09:03 PM

Quote:

Originally Posted by Kaotic Lazagna

haha, that switch is small enough as is. I end up toggling 3 switches when I'm just trying to turn on one thing lol

fyi, for future, push-on/push-off switches can be creatively hidden behind active panels-- push on the grille to turn on the headlights, etc. makes for a little more concealed setup.

Kaotic Lazagna · 04-29-2021, 09:15 PM

Quote:

Originally Posted by soundman98

fyi, for future, push-on/push-off switches can be creatively hidden behind active panels-- push on the grille to turn on the headlights, etc. makes for a little more concealed setup.

My set up is completely hidden from view once I put on the hood

(same set up as I did on the R33 and first R34).

And I don't have to get too creative since there's a hole there already. lol. Making use of the space given.

Ultramaroon · 04-29-2021, 10:44 PM

Quote:

Originally Posted by Kaotic Lazagna

And I don't have to get too creative since there's a hole there already. lol. Making use of the space given.

TWSS

Tcoat · 04-30-2021, 11:38 AM

Ready for paint. Looks silly right now but once aluminum tape is painted, torn and buckled it will be better.

Since cowling will be off and part of it is moulded right onto the airframe I need to make something up to put nose art on.

Now it is green. Well olive drab to be specific.

Tcoat · 04-30-2021, 08:33 PM

Tinted gloss coat to start the weathering and give a good base for decals.
Cant get a good picture with the gloss since it throw the colours off. The grey is much darker and not so blue in real life.
Aluminum torn and buckled.

04-25-2021, 02:15 PM	#841
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,943 Thanks: 3,096 Thanked 3,028 Times in 1,865 Posts Mentioned: 40 Post(s)	Decided to not be lazy today and finish polishing the body. Burnt through the trunk a little, so resprayed it and lightly polished it. So it has some slight orange peel still, and some kind of clear coat bubble where the spoiler starts. Oh well. Attached Images Last edited by Kaotic Lazagna; 04-25-2021 at 09:26 PM.

04-25-2021, 09:52 PM	#843
Kiske Senior Member Join Date: Jun 2013 Drives: RX-7 / BRZ Location: USA Posts: 2,349 Thanks: 1,031 Thanked 2,501 Times in 1,081 Posts Mentioned: 27 Post(s)	Lower cockpit details are done. Uppers, seats and pilots are base painted and on standby. Canopy also drying. I'd like to have her sealed by tomorrow night and moving on to the ordinance. I've got to clear some of the backlog. __________________ //2013 World Rally Blue BRZ Limited FBM Turbo--gone //2018 Crystal White Pearl BRZ Ts 2.2l Harrop Supercharged

04-25-2021, 10:57 PM	#844
soundman98 ProCrastinationConsultant Join Date: Sep 2013 Drives: '14 Ranger, '18 Tacoma 4Dr LB Location: chicago-ish Posts: 11,327 Thanks: 35,240 Thanked 13,676 Times in 6,782 Posts Mentioned: 98 Post(s)	it's not as impressive as the other work in this thread, but is technically plastic modeling. it used to be a $5 bluetooth speaker. now it's a $105 bluetooth speaker that's been 3 years in the making. took the last 2 months to work, re-work, and acoustically engineer individual internal enclosures(made from oxi-clean cups) for the speakers, and get it all to look like nothing changed outside. i should've taken pictures of the inside, but got distracted trying to get it done. it functions, but it being only a 5 watt amp, it doesn't get as loud as i'd prefer. i'm considering alternatives to get it louder. __________________ "The time you enjoy wasting is not wasted time"

04-28-2021, 08:21 PM	#847
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,943 Thanks: 3,096 Thanked 3,028 Times in 1,865 Posts Mentioned: 40 Post(s)	Well, some super glue shot out and landed on the bumper. BAH. Also, some more Aoshima quality annoyances. The rear taillight housing (chrome part) didn't fit well. Actually ended up cracking the paint as seen on the right side. The front headlight housing didn't even light up to the bumper (can see through the body because of the gap). Attached Images

04-30-2021, 11:38 AM	#853
Tcoat Senior Member Join Date: Jul 2014 Drives: 2020 Hakone Location: London, Ont Posts: 69,838 Thanks: 61,656 Thanked 108,295 Times in 46,456 Posts Mentioned: 2499 Post(s)	Ready for paint. Looks silly right now but once aluminum tape is painted, torn and buckled it will be better. Since cowling will be off and part of it is moulded right onto the airframe I need to make something up to put nose art on. Now it is green. Well olive drab to be specific. __________________ Racecar spelled backwards is Racecar, because Racecar.

04-30-2021, 08:33 PM	#854
Tcoat Senior Member Join Date: Jul 2014 Drives: 2020 Hakone Location: London, Ont Posts: 69,838 Thanks: 61,656 Thanked 108,295 Times in 46,456 Posts Mentioned: 2499 Post(s)	Tinted gloss coat to start the weathering and give a good base for decals. Cant get a good picture with the gloss since it throw the colours off. The grey is much darker and not so blue in real life. Aluminum torn and buckled. __________________ Racecar spelled backwards is Racecar, because Racecar.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TRD ABS Plastic Kit?	Shims	Cosmetic Modification (Interior/Exterior/Lighting)	5	07-19-2015 07:31 PM
Front lip - abs plastic	_frs	Want-To-Buy Requests	0	09-21-2014 11:11 AM
Trade my black dash plastic for your silver dash plastic thread.	F3dzo	Southeast	0	07-17-2012 10:06 PM
plastic interior	lancie	Scion FR-S / Toyota 86 GT86 General Forum	34	10-16-2011 01:02 PM

User Name		Remember Me?
Password