Random Thoughts - Part Deux [NO POLITICS] - Page 5492 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sapphireho · 04-10-2021, 12:01 PM

Quote:

Originally Posted by Capt Spaulding

Never learned how to weld either. We should get Tcoat to conduct a distance learning class.

He has taught several people.

Sapphireho · 04-10-2021, 02:57 PM

Quote:

Originally Posted by Ultramaroon

I learned how to weld in high school.

.

Ultramaroon · 04-10-2021, 05:00 PM

Quote:

Originally Posted by Spuds

I never learned to weld. I joined a general-interest 4H club (4H for tech nerds rather than farm nerds) about a week after they finished welding the go cart frame.

Funny thing is my dad left me all the equipment I need when my parents downsized, I just haven't had a need for it yet.

There's definitely a steep learning curve. I'm a total hack. Always end up with a huge heat-affected zone but this is mainly because I learned with oxy-acetylene and crossed over into GTAW.

I can't stick weld to save my life.

NoHaveMSG · 04-10-2021, 05:06 PM

Quote:

Originally Posted by Ultramaroon

There's definitely a steep learning curve. I'm a total hack. Always end up with a huge heat-affected zone but this is mainly because I learned with oxy-acetylene and crossed over into GTAW.

I can't stick weld to save my life.

Me too, I don't weld often enough and fall out of practice. It takes me a while and I can usually get back up to speed. About that time is when I stop welding again. I was playing with my tig a lot for a while but ran out of gas 4 months ago. Will be starting from scratch again with that

I haven't stick welded in 20 years.

Ultramaroon · 04-10-2021, 05:15 PM

Quote:

Originally Posted by NoHaveMSG

Me too, I don't weld often enough and fall out of practice. It takes me a while and I can usually get back up to speed. About that time is when I stop welding again. I was playing with my tig a lot for a while but ran out of gas 4 months ago. Will be starting from scratch again with that

I haven't stick welded in 20 years.

Welding supply is a few minutes away. I start fresh every single time. Practice for a day with scrap before the real job.

DIY-GUDENUF LYFE

spike021 · 04-10-2021, 07:05 PM

I’ve spent about four hours trying to assemble this ikea tv stand/console. This is way more trouble than it’s worth.

Capt Spaulding · 04-10-2021, 07:30 PM

Were you welding it?

Ultramaroon · 04-10-2021, 07:37 PM

Quote:

Originally Posted by spike021

I’ve spent about four hours trying to assemble this ikea tv stand/console. This is way more trouble than it’s worth.

Write a program to do it.

Capt Spaulding · 04-10-2021, 07:55 PM

Quote:

Originally Posted by spike021

I’ve spent about four hours trying to assemble this ikea tv stand/console. This is way more trouble than it’s worth.

Dude. You're an engineer. Assembling shit is cake.

spike021 · 04-10-2021, 07:57 PM

Quote:

Originally Posted by Ultramaroon

Write a program to do it.

If only!

Quote:

Originally Posted by Capt Spaulding

Dude. You're an engineer. Assembling shit is cake.

Software! Not hardware!

Anything I gotta do with my hands, I basically have two left hands.

No, not that, @humfrz ya dirty birdy.

Kiske · 04-10-2021, 08:15 PM

Busy day. Finally finished up the last of my home repairs from the damn racoons's that broke in a few months back. Next up see about resealing the chimney as a few bricks look like they are about to crumble/let go.

Also dropped ol' blue off to get the ac refrigerant sucked down and refilled. Will also let them see if they can verify my timing issue be it a bad gear, ecu mismatch or valve clearance issues, (p0018, p219a, p304.) I don't really have much confidence in them though, especially when the service writer asked me if my gas cap was tight... I really don't want to throw anymore parts and money at this thing but, it is one thing off my plate for now. On the bright side, it freed up a spot in the driveway which is sweet.

Going to grab some dinner and possibly stop by and see if there is a PS5 instock at a local store, brothers been hassling me to buy one so we can play together... I got the last gen consoles but use them more for streaming these days than playing.

ichitaka05 · 04-10-2021, 08:36 PM

Installed several smart light switches in the new house. Entertainment room & hallway wiring was so fucked up, it took me 2 days to figure things out. At this point, I would prob become electrician... no that’s a lie. I electrocute myself so many times. Not cuz I didn’t turn off the breaker, but damn switch next to it is power by other breaker

soundman98 · 04-10-2021, 08:53 PM

Quote:

Originally Posted by ichitaka05

Installed several smart light switches in the new house. Entertainment room & hallway wiring was so fucked up, it took me 2 days to figure things out. At this point, I would prob become electrician... no that’s a lie. I electrocute myself so many times. Not cuz I didn’t turn off the breaker, but damn switch next to it is power by other breaker

We're hiring!

humfrz · 04-10-2021, 09:31 PM

Quote:

Originally Posted by spike021

If only!

Software! Not hardware!

Anything I gotta do with my hands, I basically have two left hands.

No, not that, @humfrz ya dirty birdy.

So, ...... you still have to sit on a hand ......

04-10-2021, 07:30 PM	#76881
Capt Spaulding Persona Non Grata Join Date: Nov 2015 Drives: '15 BRZ (WRB) Location: On the Border Posts: 1,882 Thanks: 2,016 Thanked 2,782 Times in 1,201 Posts Mentioned: 10 Post(s) Tagged: 1 Thread(s)	Were you welding it? __________________ Slow is smooth, and smooth is fast

04-10-2021, 08:15 PM	#76885
Kiske Senior Member Join Date: Jun 2013 Drives: RX-7 / BRZ Location: USA Posts: 2,349 Thanks: 1,031 Thanked 2,501 Times in 1,081 Posts Mentioned: 27 Post(s) Tagged: 0 Thread(s)	Busy day. Finally finished up the last of my home repairs from the damn racoons's that broke in a few months back. Next up see about resealing the chimney as a few bricks look like they are about to crumble/let go. Also dropped ol' blue off to get the ac refrigerant sucked down and refilled. Will also let them see if they can verify my timing issue be it a bad gear, ecu mismatch or valve clearance issues, (p0018, p219a, p304.) I don't really have much confidence in them though, especially when the service writer asked me if my gas cap was tight... I really don't want to throw anymore parts and money at this thing but, it is one thing off my plate for now. On the bright side, it freed up a spot in the driveway which is sweet. Going to grab some dinner and possibly stop by and see if there is a PS5 instock at a local store, brothers been hassling me to buy one so we can play together... I got the last gen consoles but use them more for streaming these days than playing. __________________ //2013 World Rally Blue BRZ Limited FBM Turbo--gone //2018 Crystal White Pearl BRZ Ts 2.2l Harrop Supercharged

04-10-2021, 08:36 PM	#76886
ichitaka05 Site Moderator Join Date: Oct 2009 Drives: ichi 86 Project Location: Middle of No where Posts: 21,053 Thanks: 7,730 Thanked 19,281 Times in 8,389 Posts Mentioned: 697 Post(s) Tagged: 28 Thread(s)	Installed several smart light switches in the new house. Entertainment room & hallway wiring was so fucked up, it took me 2 days to figure things out. At this point, I would prob become electrician... no that’s a lie. I electrocute myself so many times. Not cuz I didn’t turn off the breaker, but damn switch next to it is power by other breaker __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Language Rant Part Deux	MuseChaser	Off-Topic Lounge [WARNING: NO POLITICS]	43	04-23-2017 08:55 PM
Random thoughts thread	MrVito	Off-Topic Lounge [WARNING: NO POLITICS]	37188	02-25-2016 11:00 AM
Random Rubber Part	OoLong	BRZ First-Gen (2012+) — General Topics	8	01-28-2014 11:31 AM
Crew Carshow : Part Deux 9/7/13	saiyajinimports	Great Lakes	0	08-17-2013 06:18 AM

User Name		Remember Me?
Password