Plastic Modeling - Page 39 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Kaotic Lazagna · 03-07-2021, 09:53 PM

Quote:

Originally Posted by soundman98

need to keep sanding, adding filler, and more sanding. really a pain.

But if I add more filler, it will no longer be flush with the body.

Kaotic Lazagna · 03-07-2021, 09:57 PM

So this is what it looks like. I guess I missed that tiny hole, or a chunk of putty came off when I was sanding???

Kiske · 03-07-2021, 09:58 PM

Is the area you placed in too high (sand more) or too low (add filler)? Remember you should be samding before amd after applying fillers and primer to have a better bond and finish.

Kaotic Lazagna · 03-07-2021, 10:03 PM

Quote:

Originally Posted by Kiske

Is the area you placed in too high (sand more) or too low (add filler)? Remember you should be samding before amd after applying fillers and primer to have a better bond and finish.

For the most part, they're flush with the rest of the roof (my nail does not catch on the front and back sections). It's only the sides that aren't super flush since I didn't want to sand away the rain channel on the side. But that doesn't show as bad as the front and back.

I did sand before and after the filler, and even sanded it down more after the gray primer.

Kaotic Lazagna · 03-07-2021, 10:05 PM

Sanded down with 320 grit, then when it was near the roof line, sanded down with 800, then 1500, then 2000, and finished with toothpaste.

Edit: I should clarify that's what I did prior to spraying the gray primer, and again before the white primer.

Tcoat · 03-08-2021, 08:29 AM

Quote:

Originally Posted by Kaotic Lazagna

Sanded down with 320 grit, then when it was near the roof line, sanded down with 800, then 1500, then 2000, and finished with toothpaste.

Edit: I should clarify that's what I did prior to spraying the gray primer, and again before the white primer.

Fill and sand. Fill and sand. Fill and sand.

Or just cover it up with something that hides it.

Kaotic Lazagna · 03-08-2021, 11:09 AM

Quote:

Originally Posted by Tcoat

Fill and sand. Fill and sand. Fill and sand.

Or just cover it up with something that hides it.

Will be one fancy pizza delivery vehicle. Hahaha

Tcoat · 03-08-2021, 11:14 AM

Quote:

Originally Posted by Kaotic Lazagna

Will be one fancy pizza delivery vehicle. Hahaha

Times are tuff!

JD001 · 03-08-2021, 02:51 PM

Quote:

Originally Posted by Kaotic Lazagna

So this is what it looks like. I guess I missed that tiny hole, or a chunk of putty came off when I was sanding???

Did you fill in the sunroof? Greater torsional rigidity..

Kaotic Lazagna · 03-08-2021, 03:37 PM

Quote:

Originally Posted by JD001

Did you fill in the sunroof? Greater torsional rigidity..

Tcoat · 03-09-2021, 12:11 PM

Teaser

bcj · 03-09-2021, 12:15 PM

Did the alternator catch on the frame when you hoisted it out?

Don't think the belts line up now.

Tcoat · 03-09-2021, 12:18 PM

Quote:

Originally Posted by bcj

Did the alternator catch on the frame when you hoisted it out?

Don't think the belts line up now.

I did have it in and out many times (both the real thing and the model).
It was straightened up before it was glued in.

Sapphireho · 03-09-2021, 12:20 PM

Quote:

Originally Posted by Tcoat

It was straightened up before it was glued in.

The model or the real one?

03-07-2021, 09:57 PM	#534
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,943 Thanks: 3,096 Thanked 3,028 Times in 1,865 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	So this is what it looks like. I guess I missed that tiny hole, or a chunk of putty came off when I was sanding??? Attached Images

03-07-2021, 09:58 PM	#535
Kiske Senior Member Join Date: Jun 2013 Drives: RX-7 / BRZ Location: USA Posts: 2,349 Thanks: 1,031 Thanked 2,501 Times in 1,081 Posts Mentioned: 27 Post(s) Tagged: 0 Thread(s)	Is the area you placed in too high (sand more) or too low (add filler)? Remember you should be samding before amd after applying fillers and primer to have a better bond and finish. __________________ //2013 World Rally Blue BRZ Limited FBM Turbo--gone //2018 Crystal White Pearl BRZ Ts 2.2l Harrop Supercharged

03-07-2021, 10:05 PM	#537
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,943 Thanks: 3,096 Thanked 3,028 Times in 1,865 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	Sanded down with 320 grit, then when it was near the roof line, sanded down with 800, then 1500, then 2000, and finished with toothpaste. Edit: I should clarify that's what I did prior to spraying the gray primer, and again before the white primer. Last edited by Kaotic Lazagna; 03-08-2021 at 07:17 AM.

03-09-2021, 12:11 PM	#543
Tcoat Senior Member Join Date: Jul 2014 Drives: 2020 Hakone Location: London, Ont Posts: 69,841 Thanks: 61,656 Thanked 108,295 Times in 46,456 Posts Mentioned: 2499 Post(s) Tagged: 50 Thread(s)	Teaser Attached Images __________________ Racecar spelled backwards is Racecar, because Racecar.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TRD ABS Plastic Kit?	Shims	Cosmetic Modification (Interior/Exterior/Lighting)	5	07-19-2015 08:31 PM
Front lip - abs plastic	_frs	Want-To-Buy Requests	0	09-21-2014 12:11 PM
Trade my black dash plastic for your silver dash plastic thread.	F3dzo	Southeast	0	07-17-2012 11:06 PM
plastic interior	lancie	Scion FR-S / Toyota 86 GT86 General Forum	34	10-16-2011 02:02 PM

User Name		Remember Me?
Password