Data Logs! Post them here. - Page 143 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

southside iraq · 02-02-2021, 01:49 AM

Quote:

Originally Posted by gen3v8

BUMP

too choppy of a maf curve. needs to be more linear

Cebal · 02-27-2021, 06:34 PM

Can someone check my short idle log? It idles fine but sometimes after giving it a little bit of gas the idle dips down like its almost stalling 400-500RPM range then it goes up to 1500RPM and after it stabilizes at 900RPM.
Also I noticed my Fuel pump duty % goes abnormally high when the RPM dips. Any suggestions?

https://datazap.me/u/cebal/dt?log=0&data=3-20-25

pro_turbo · 02-27-2021, 10:07 PM

Can somebody please help me with a really good stock calibration for FT86 2015 AT
MAF
IAT
MAP
AVCS

Thanks

LancePower · 03-07-2021, 06:48 PM

2020 BRZ
Stage 1
Wayno v160

https://drive.google.com/file/d/1I6z...ew?usp=sharing

tomm.brz · 03-07-2021, 09:22 PM

Quote:

Originally Posted by LancePower

2020 BRZ
Stage 1
Wayno v160

https://drive.google.com/file/d/1I6z...ew?usp=sharing

it would benefit from a bit of maf scaling and some retouch here and there

You're supposed to do a FULL throttle run anyway, from 2000 rpm to redline
Your log is not so well recorded, also to upload logs quickly: datazap.me

LancePower · 03-08-2021, 04:48 AM

Quote:

Originally Posted by tomm.brz

it would benefit from a bit of maf scaling and some retouch here and there

You're supposed to do a FULL throttle run anyway, from 2000 rpm to redline
Your log is not so well recorded, also to upload logs quickly: datazap.me

Thanks for the review. Yes, I realized when I looked at it that I never achieved full throttle. It's still in the 40's here, so I guess I held back a little subconsciously.

What parameter indicates the MAF Scaling?

gen3v8 · 03-08-2021, 05:32 AM

4 Pulls e85
https://datazap.me/u/gen3v8/4pulls

tomm.brz · 03-08-2021, 06:46 AM

Quote:

Originally Posted by gen3v8

4 Pulls e85
https://datazap.me/u/gen3v8/4pulls

kev0 · 03-08-2021, 05:40 PM

For tuners who are familiar with Ecutek: Do you know why Ecutek datalogging would count misfires then wipe them back to 0 after a few seconds?

tomm.brz · 03-08-2021, 06:05 PM

because it s real time counter and not cumulative over time
where do you have misfires?

kev0 · 03-08-2021, 10:57 PM

Quote:

Originally Posted by tomm.brz

because it s real time counter and not cumulative over time
where do you have misfires?

Thank you! I was just curious!

LancePower · 03-14-2021, 06:19 PM

Quote:

Originally Posted by tomm.brz

it would benefit from a bit of maf scaling and some retouch here and there

You're supposed to do a FULL throttle run anyway, from 2000 rpm to redline
Your log is not so well recorded, also to upload logs quickly: datazap.me

Here is a redux at full throttle. Thank you for your time.

https://drive.google.com/file/d/1M0D...ew?usp=sharing

tomm.brz · 03-14-2021, 06:29 PM

Please upload it to datazap. me and link here
not going to upload it by myself, sorry

LancePower · 03-15-2021, 05:36 AM

Quote:

Originally Posted by tomm.brz

Please upload it to datazap. me and link here
not going to upload it by myself, sorry

Here you go....

https://datazap.me/u/lancepower/lanc...7-8-9-10-11-14

03-07-2021, 06:48 PM	#1992
LancePower Senior Member Join Date: Aug 2016 Drives: 2020 BRZ tS Location: NJ Posts: 513 Thanks: 96 Thanked 192 Times in 119 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Data Log for review.... 2020 BRZ Stage 1 Wayno v160 https://drive.google.com/file/d/1I6z...ew?usp=sharing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RGM Supercharged 86 performance data	TheGooseman	AFRICA	14	12-13-2014 02:15 AM
Interpreting Ecutek Data Logs?	cuddefred	Software Tuning	3	09-02-2013 01:55 PM
VIR - Impressions/Pics/Logs/Video (Track Daze)	swift996	Tracking / Autocross / HPDE / Drifting	39	08-30-2013 10:21 AM
Noise tube delete air/fuel logs?	jm1681	Engine, Exhaust, Transmission	13	10-17-2012 05:57 PM
ECU Data Logger	Motordyne	Engine, Exhaust, Transmission	5	07-18-2012 10:27 AM

02-27-2021, 06:34 PM	#1990
Cebal Member Join Date: May 2018 Drives: 15' BRZ Limited Location: Europe Posts: 23 Thanks: 5 Thanked 14 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Can someone check my short idle log? It idles fine but sometimes after giving it a little bit of gas the idle dips down like its almost stalling 400-500RPM range then it goes up to 1500RPM and after it stabilizes at 900RPM. Also I noticed my Fuel pump duty % goes abnormally high when the RPM dips. Any suggestions? https://datazap.me/u/cebal/dt?log=0&data=3-20-25

02-27-2021, 10:07 PM	#1991
pro_turbo Member Join Date: Jul 2013 Drives: Posts: 96 Thanks: 8 Thanked 7 Times in 7 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Can somebody please help me with a really good stock calibration for FT86 2015 AT MAF IAT MAP AVCS Thanks

03-08-2021, 05:32 AM	#1995
gen3v8 30 minute maintenance Join Date: Oct 2020 Drives: My18 wrxsti Location: Botany Bay Posts: 1,178 Thanks: 769 Thanked 1,236 Times in 631 Posts Mentioned: 7 Post(s) Tagged: 0 Thread(s)	4 Pulls e85 https://datazap.me/u/gen3v8/4pulls

03-08-2021, 05:40 PM	#1997
kev0 Senior Member Join Date: Feb 2018 Drives: '14 Location: Midwest Posts: 485 Thanks: 246 Thanked 99 Times in 76 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	For tuners who are familiar with Ecutek: Do you know why Ecutek datalogging would count misfires then wipe them back to 0 after a few seconds?

03-08-2021, 06:05 PM	#1998
tomm.brz Senior Member Join Date: Jan 2017 Drives: brz 2017 hksv2 Location: italy Posts: 2,285 Thanks: 516 Thanked 1,124 Times in 814 Posts Mentioned: 70 Post(s) Tagged: 0 Thread(s)	because it s real time counter and not cumulative over time where do you have misfires?

03-14-2021, 06:29 PM	#2001
tomm.brz Senior Member Join Date: Jan 2017 Drives: brz 2017 hksv2 Location: italy Posts: 2,285 Thanks: 516 Thanked 1,124 Times in 814 Posts Mentioned: 70 Post(s) Tagged: 0 Thread(s)	Please upload it to datazap. me and link here not going to upload it by myself, sorry

User Name		Remember Me?
Password