Random Thoughts - Part Deux [NO POLITICS]

[Sapphireho]

Originally Posted by Dadhawk

At least yours works. The one in ours started making a large single ice cube due to not staying cold enough about 4 hours after the warranty ran out. If you clean it up, it works about 4 weeks before it does it again so we now just use the one in the freezer drawer.

This is apparently a very common issue with Samsung french door refrigerators, amongst about 100 other little things.

I did avoid Samsung on your recommendation. It's a GE. I've always had good luck with GE.

Next is the ovens. Unless I do some major remodeling, I have a choice of 2. Who builds a 3200sqft house and designs the kitchen with a 24" oven?

[humfrz]

Originally Posted by Sapphireho

Next is the ovens. Unless I do some major remodeling, I have a choice of 2. Who builds a 3200sqft house and designs the kitchen with a 24" oven?

I-da-ho ....?

[ichitaka05]

Dentist this morning went well. Got cleaning in May.

Now for the bad news... ugh! Condensation. I guess when I put the gasket & seal, I didn’t put it enough

[wolffbite]

Originally Posted by ichitaka05

Dentist this morning went well. Got cleaning in May.

Now for the bad news... ugh! Condensation. I guess when I put the gasket & seal, I didn’t put it enough

Good excuse to upgrade to some 2017+ OEM tails

[ichitaka05]

Originally Posted by wolffbite

Good excuse to upgrade to some 2017+ OEM tails

Actually, I don't like kouki 86 tail lights. Also I have Tail-As-Turn kit & changed turn lights into reverse lights.

When I get new house, I'll get another Depo blackout OEM style lights w new gaskets & seal. This time I'll damn make sure to put a lot of seal, so water doesn't get in.

[Ultramaroon]

Originally Posted by ichitaka05

Actually, I don't like kouki 86 tail lights. Also I have Tail-As-Turn kit & changed turn lights into reverse lights.

When I get new house, I'll get another Depo blackout OEM style lights w new gaskets & seal. This time I'll damn make sure to put a lot of seal, so water doesn't get in.

Get new gaskets. No need for anything more. Inspect the mounting surface for warpage, especially at the mount points. That area is quite flexible. Just leaning on the light fixture can break the seal. Be careful to avoid overtightening the nuts. Might be tempted to really crank on them but that just about guarantees opposite results.

[humfrz]

Originally Posted by Ultramaroon

Get new gaskets. No need for anything more. Inspect the mounting surface for warpage, especially at the mount points. That area is quite flexible. Just leaning on the light fixture can break the seal. Be careful to avoid overtightening the nuts. Might be tempted to really crank on them but that just about guarantees opposite results.

Speaking from experience?

[Ultramaroon]

Originally Posted by humfrz

Speaking from experience?

Who, me? Nooooooo....

[ichitaka05]

Originally Posted by Ultramaroon

Get new gaskets. No need for anything more. Inspect the mounting surface for warpage, especially at the mount points. That area is quite flexible. Just leaning on the light fixture can break the seal. Be careful to avoid overtightening the nuts. Might be tempted to really crank on them but that just about guarantees opposite results.

Yeah, hopefully water gets out and no wiring issue. I've ordered Ninja Gaskets, so hopefully weather gets better I'll do it.

[ichitaka05]

I was watching YouTube of guessing which Disney’s movie, title of the song & who sings it w my nephew. Surprising I got decently high score.

If you wanna try, here you go. I got 45 points

[beltax90]

this is cool

[humfrz]

Originally Posted by Sapphireho

I did avoid Samsung on your recommendation. It's a GE. I've always had good luck with GE.

Next is the ovens. Unless I do some major remodeling, I have a choice of 2. Who builds a 3200sqft house and designs the kitchen with a 24" oven?

In order to keep up with the Sapphirehos, I went out and bought a new stove/oven today. Yep, the main burner went out on the old one AND the flat surface "glass" top cracked big time. Who's dumb idea was it to put electric burners under a glass top anyway? -

Besides all of that, the oven was dirty -

DAMN, how many different styles and types of stoves can their be - maybe a thousand?! So, I chose the basics, and even at that, it came to over $1,000.

That's about the least fun thousand dollars that I've ever spent -

[Sapphireho]

Originally Posted by humfrz

In order to keep up with the Sapphirehos, I went out and bought a new stove/oven today. Yep, the main burner went out on the old one AND the flat surface "glass" top cracked big time. Who's dumb idea was it to put electric burners under a glass top anyway? -

Besides all of that, the oven was dirty -

DAMN, how many different styles and types of stoves can their be - maybe a thousand?! So, I chose the basics, and even at that, it came to over $1,000.

That's about the least fun thousand dollars that I've ever spent -

Samsung?

[ichitaka05]

Ugh this house hunting have been bitch... well more like this one we put an offer have been very bitch. Seriously, 1 more bitching from them I'm walking out. I'm done w their BS.