WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1624 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Kaotic Lazagna · 01-03-2021, 07:38 PM

Quote:

Originally Posted by alex87f

I wish there was a way to replace the whole glass for cheap, but that doesn't seem to exist.

Mine are starting to show signs of fade, but with the car being street parked 100% of the time, I'm afraid a polish will just make things worse long-term. And replacement euro lights (with HIDs, like the 10 series) aren't cheap, like $1200+ for a set.

Polish and then just wax them every time you wash your car.

soundman98 · 01-03-2021, 08:22 PM

^yep. of course, i haven't kept a car much longer than 2-3 years after detailing, but do the cleanup once, and then just typical clay bar and wax every few months is usually enough to not need to re-clean them.

Racenut · 01-03-2021, 11:22 PM

Put the body kit back on. Car came with it when I got it but the double stick tape was coming undone in places and needed to be redone. Getting it off was a pain in the ass, but those adhesive erasers for your drill do actually work.

humfrz · 01-04-2021, 11:07 AM

Quote:

Originally Posted by Racenut

Put the body kit back on. Car came with it when I got it but the double stick tape was coming undone in places and needed to be redone. Getting it off was a pain in the ass, but those adhesive erasers for your drill do actually work.

Car looks good.

Looks like it's time for a garage sale -

Racenut · 01-04-2021, 12:30 PM

Quote:

Originally Posted by humfrz

Looks like it's time for a garage sale -

No kidding, if you see anything you want, make an offer lol.

humfrz · 01-04-2021, 01:17 PM

Quote:

Originally Posted by Racenut

No kidding, if you see anything you want, make an offer lol.

Well, I see some things I would like ...... but, my garage and basement are full!

Racenut · 01-04-2021, 01:43 PM

Quote:

Originally Posted by humfrz

Well, I see some things I would like ...... but, my garage and basement are full!

You can't have my shop monkey, my wife is quite fond of him

RToyo86 · 01-04-2021, 05:41 PM

Ordered some Moog adjustable LCAs.
Picked up some new front rotors and a new set of maxpider mats for the rear seats from local part out.

new2subaru · 01-05-2021, 09:07 PM

Wheels are back from paint. 16 x 7 SSR Type C 11lbs

jflogerzi · 01-05-2021, 09:47 PM

Quote:

Originally Posted by new2subaru

Wheels are back from paint. 16 x 7 SSR Type C 11lbs

Wow 11lbs. You gonna run 215 or 225?

Sent from my GM1915 using Tapatalk

Ashikabi · 01-05-2021, 10:01 PM

Quote:

Originally Posted by jflogerzi

Wow 11lbs. You gonna run 215 or 225?

Sent from my GM1915 using Tapatalk

225 for that extra meaty look

Sent from my ONEPLUS A5010 using Tapatalk

Compelica · 01-06-2021, 04:24 AM

Quote:

Originally Posted by soundman98

after the sealant, just regularly apply your favorite wax to them to easily double the life of the kit.

Most of the workshop guys here to do a layer or two of clear urethane to keep it pristine for a few more years.

new2subaru · 01-06-2021, 06:27 AM

Quote:

Originally Posted by jflogerzi

Wow 11lbs. You gonna run 215 or 225?

Sent from my GM1915 using Tapatalk

I've been running 205 on track for the last few years and will likely bump up to 225 later this year or next.I run a set of cheap 16 x 7 with 225/50 16 on the street.

Can' wait to try these

Silviacrazed · 01-06-2021, 06:28 PM

Installed the abs control module from a 2017 86.

Sent from my iPhone using Tapatalk

01-03-2021, 08:22 PM	#22724
soundman98 ProCrastinationConsultant Join Date: Sep 2013 Drives: '14 Ranger, '18 Tacoma 4Dr LB Location: chicago-ish Posts: 11,327 Thanks: 35,240 Thanked 13,676 Times in 6,782 Posts Mentioned: 98 Post(s)	^yep. of course, i haven't kept a car much longer than 2-3 years after detailing, but do the cleanup once, and then just typical clay bar and wax every few months is usually enough to not need to re-clean them. __________________ "The time you enjoy wasting is not wasted time"

01-03-2021, 11:22 PM	#22725
Racenut Member Join Date: Apr 2020 Drives: 2013 FR-S Location: Santa Cruz, Ca Posts: 39 Thanks: 8 Thanked 82 Times in 24 Posts Mentioned: 1 Post(s)	Put the body kit back on. Car came with it when I got it but the double stick tape was coming undone in places and needed to be redone. Getting it off was a pain in the ass, but those adhesive erasers for your drill do actually work. Attached Images

01-04-2021, 05:41 PM	#22730
RToyo86 Senior Member Join Date: Mar 2018 Drives: 17 Asphalt 86 Location: Ottawa Posts: 2,400 Thanks: 1,890 Thanked 2,642 Times in 1,292 Posts Mentioned: 16 Post(s)	Ordered some Moog adjustable LCAs. Picked up some new front rotors and a new set of maxpider mats for the rear seats from local part out. Attached Images

01-05-2021, 09:07 PM	#22731
new2subaru Weight Weenie Join Date: Aug 2015 Drives: 15 FR-S Location: Canada Posts: 2,662 Thanks: 5,247 Thanked 2,434 Times in 1,397 Posts Mentioned: 12 Post(s)	Wheels are back from paint. 16 x 7 SSR Type C 11lbs Attached Images

01-06-2021, 06:28 PM	#22736
Silviacrazed Senior Member Join Date: Apr 2020 Drives: 2016 Scion FR-S Location: Glenmoore, PA Posts: 172 Thanks: 115 Thanked 169 Times in 84 Posts Mentioned: 0 Post(s)	Installed the abs control module from a 2017 86. Sent from my iPhone using Tapatalk Last edited by Silviacrazed; 01-08-2021 at 12:11 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 04:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 06:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 10:19 PM

User Name		Remember Me?
Password