WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1604 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

DarkSideFRS · 10-18-2020, 01:18 PM

Sold it! Good luck to the new owner with the recalled motor lol

DarkSunrise · 10-18-2020, 05:38 PM

Plugged up the sound tube and drove one of my favorite local canyons with a friend in his s2000. Also had some fun chasing a track prepped mr2. Reminded me why I love this car. Every time I drive the FRS in the canyons or track, it feels in its element.

Also plugging the sound tube makes the engine feel smoother and removes the coarseness from the sound. I go back and forth on it, but I think it’s going to stay plugged.

KR-S · 10-18-2020, 10:23 PM

Got my car back from the shop yesterday, and got some OEM wheels for use with drifting. They're gonna need valve stems and TPMS sensors though. This something I can do myself, or am I gonna need a tire shop for this one?

soundman98 · 10-18-2020, 10:48 PM

Quote:

Originally Posted by KR-S

Got my car back from the shop yesterday, and got some OEM wheels for use with drifting. They're gonna need valve stems and TPMS sensors though. This something I can do myself, or am I gonna need a tire shop for this one?

depends on how complete you want them to be.

i put rubber valve stems in and some magical electrical tape blanked off the angrily-flashing idiot light.

but if you need a mount/balance, they need to be installed at the time of mounting, and then need to be programmed to the car...

KR-S · 10-18-2020, 11:34 PM

Quote:

Originally Posted by soundman98

depends on how complete you want them to be.

i put rubber valve stems in and some magical electrical tape blanked off the angrily-flashing idiot light.

but if you need a mount/balance, they need to be installed at the time of mounting, and then need to be programmed to the car...

For me, since these are a drift set, all I really, really need is some actual valve stems that mount to the car, so I don't give two shits about programming anything, but I'm not even sure if there are aftermarket valve stems I can slap on.

I was planning on picking these up; I heard that these are the same as the OEM TPMS sensor and even if they aren't, they'll still serve their purpose of holding air in hopefully.

soundman98 · 10-18-2020, 11:46 PM

Quote:

Originally Posted by KR-S

For me, since these are a drift set, all I really, really need is some actual valve stems that mount to the car, so I don't give two shits about programming anything, but I'm not even sure if there are aftermarket valve stems I can slap on.

I was planning on picking these up; I heard that these are the same as the OEM TPMS sensor and even if they aren't, they'll still serve their purpose of holding air in hopefully.

these are what are installed in my oem '14 wheels. they work just fine, and at $2 each, i don't cry replacing them every few years.

Legoshi · 10-19-2020, 12:44 AM

MTEC Springs baybeee

I also ordered that awful TRD Quickshifter because I found it on eBay for super cheap. They just came out with orange thread locker, which supposedly is said to be stronger than blue locktite but it doesn't require heat to remove like the red stuff. We'll see what happens!

RToyo86 · 10-19-2020, 09:25 AM

Attended our annual Fall cruise. Managed to get 20 cars together despite 2020 being a write off for most people.

Tcoat · 10-19-2020, 05:44 PM

Quote:

Originally Posted by RToyo86

Attended our annual Fall cruise. Managed to get 20 cars together despite 2020 being a write off for most people.

I was within a couple of hundred kilometres of Ottawa yesterday. If I had know there was a cruise I could have planned on attending. If you guys wouldn’t have minded an Outback intruder.

Ultramaroon · 10-19-2020, 06:30 PM

Quote:

Originally Posted by Tcoat

Outback intruder.

Is that the cop version?

Tcoat · 10-19-2020, 06:50 PM

Quote:

Originally Posted by Ultramaroon

Is that the cop version?

Low level ground attack version.

DarkSideFRS · 10-19-2020, 07:06 PM

Quote:

Originally Posted by Legoshi

MTEC Springs baybeee

I also ordered that awful TRD Quickshifter because I found it on eBay for super cheap. They just came out with orange thread locker, which supposedly is said to be stronger than blue locktite but it doesn't require heat to remove like the red stuff. We'll see what happens!

the TRD Quickshifter is junk. I have the STI short shifter if u're interested. I'm in socal, OC area.

weederr33 · 10-19-2020, 10:13 PM

Quote:

Originally Posted by Legoshi

MTEC Springs baybeee

I also ordered that awful TRD Quickshifter because I found it on eBay for super cheap. They just came out with orange thread locker, which supposedly is said to be stronger than blue locktite but it doesn't require heat to remove like the red stuff. We'll see what happens!

I just installed the quickshifter, too, paired with the STI short shifter. If it doesn't crap out on me, it will be an interesting combo

Ultramaroon · 10-19-2020, 10:20 PM

Quote:

Originally Posted by Tcoat

Low level ground attack version.

Love. It's what makes a Grumman, a Grumman.

10-18-2020, 05:38 PM	#22444
DarkSunrise Senior Member Join Date: Apr 2012 Drives: 22 BRZ (Previously 13 FR-S) Location: USA Posts: 5,798 Thanks: 2,187 Thanked 4,243 Times in 2,221 Posts Mentioned: 48 Post(s)	Plugged up the sound tube and drove one of my favorite local canyons with a friend in his s2000. Also had some fun chasing a track prepped mr2. Reminded me why I love this car. Every time I drive the FRS in the canyons or track, it feels in its element. Also plugging the sound tube makes the engine feel smoother and removes the coarseness from the sound. I go back and forth on it, but I think it’s going to stay plugged. __________________ "Never run out of real estate, traction, and ideas at the same time." 2022 BRZ Build 2013 FR-S Build

10-19-2020, 09:25 AM	#22450
RToyo86 Senior Member Join Date: Mar 2018 Drives: 17 Asphalt 86 Location: Ottawa Posts: 2,400 Thanks: 1,890 Thanked 2,642 Times in 1,292 Posts Mentioned: 16 Post(s)	Attended our annual Fall cruise. Managed to get 20 cars together despite 2020 being a write off for most people. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 04:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 06:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 10:19 PM

10-18-2020, 01:18 PM	#22443
DarkSideFRS Banned Join Date: Apr 2017 Drives: 2013 pearl white FR-S Location: Socal Posts: 536 Thanks: 39 Thanked 191 Times in 124 Posts Mentioned: 3 Post(s)	Sold it! Good luck to the new owner with the recalled motor lol

10-18-2020, 10:23 PM	#22445
KR-S Sporadic Member Join Date: Nov 2015 Drives: 2016 Halo FR-S M/T Location: Earth Posts: 3,145 Thanks: 5,221 Thanked 3,552 Times in 1,746 Posts Mentioned: 50 Post(s)	Got my car back from the shop yesterday, and got some OEM wheels for use with drifting. They're gonna need valve stems and TPMS sensors though. This something I can do myself, or am I gonna need a tire shop for this one?

10-19-2020, 12:44 AM	#22449
Legoshi Member Join Date: Oct 2020 Drives: 2015 Firestorm FR-S MT Location: CA - California Posts: 30 Thanks: 12 Thanked 19 Times in 10 Posts Mentioned: 0 Post(s)	MTEC Springs baybeee I also ordered that awful TRD Quickshifter because I found it on eBay for super cheap. They just came out with orange thread locker, which supposedly is said to be stronger than blue locktite but it doesn't require heat to remove like the red stuff. We'll see what happens!

User Name		Remember Me?
Password