Verus Engineering Carbon Duck Tail Spoiler Thread

[Grady]

Originally Posted by Vracer111

Alrighty.... have it on! I prepped the spoiler by sanding down the front edge to be less square, more beveled/rounded and sealed the new leading edge with Hysol epoxy. Painted Rustoleum satin black, clear coated, and turtlewaxed 10 minutes after last clearcoat layer is dry (found that technique works well) .... I'll take better pictures later, but this is what I have now:

Good call on the Hysol for the leading edge sealing. I have noticed the center front on mine has come unbounded. Going to redo it and put a bead of CS3204 (or what ever sealant that is black and out of date from work) fillet around the front and sides. That will keep it bonded and water from getting in.

[Clark20]

I'm will be selling mine if anyone is interested

Sent from my SM-N960U using Tapatalk

[Greenbean]

Originally Posted by Grady

Installing the Ducktail spoiler on my 2017, along with the high efficiency wing. Both were an easy install finished most everything up in a couple of hours. Just need to do some final tweaking and then final installation.

Do you have a picture without the big spoiler and just the ducktail?

[Grady]

Originally Posted by Greenbean

Do you have a picture without the big spoiler and just the ducktail?

No I installed them at the same time.