WHAT DID YOU DO TO YOUR FRS TODAY? - Page 1578 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

humfrz · 06-30-2020, 02:58 PM

Quote:

Originally Posted by DocRecon

You know, I had heard that somewhere before.......LMAO. But, I like to.

Especially when I live in a state that has coal-dust particles the size of a snowflake, salt that still finds its way on your vehicle 6mths after winter (somehow), and rain from factories that will melt your paint.

Oh yes, I didn't notice - Kentucky - coal mines - reducing coal to coke -

You mentioned a wrap - what about a gray and black speckled wrap -

DocRecon · 06-30-2020, 03:49 PM

Quote:

Originally Posted by humfrz

Oh yes, I didn't notice - Kentucky - coal mines - reducing coal to coke -

You mentioned a wrap - what about a gray and black speckled wrap -

Hilarious! One big chunk of coal.

....well, I'll be kinda close. I'm getting my hood wrapped in gloss carbon fiber, so at least it'll be black.

cmorris927 · 06-30-2020, 07:42 PM

Picked up the Subaru trunk lid liner for my FRS today from the local Subaru dealer. Realized upon getting home it didn't come with the clips to install. Does anyone know the part number for the clips? Couldn't find it...

Wally86 · 07-01-2020, 06:49 AM

Quote:

Originally Posted by cmorris927

Picked up the Subaru trunk lid liner for my FRS today from the local Subaru dealer. Realized upon getting home it didn't come with the clips to install. Does anyone know the part number for the clips? Couldn't find it...

https://www.subarupartsdeal.com/part...odel=&Filter=()

Subaru Part No.: 909140044
CLIP 2PIECE D8

cmorris927 · 07-01-2020, 08:52 AM

Quote:

Originally Posted by Wally86

https://www.subarupartsdeal.com/part...odel=&Filter=()

Subaru Part No.: 909140044
CLIP 2PIECE D8

Thanks!

Kyyuna · 07-02-2020, 09:41 PM

Scuffed up my front passenger side bumper trying to reverse out of this really crappy parking in Whittier, when grabbing hotwings. The wings definitely cheered me up tho, I guess another thing to work on with her I suppose.

humfrz · 07-02-2020, 10:43 PM

Quote:

Originally Posted by Kyyuna

Scuffed up my front passenger side bumper trying to reverse out of this really crappy parking in Whittier, when grabbing hotwings. The wings definitely cheered me up tho, I guess another thing to work on with her I suppose.

Nah, I wouldn't worry about it. When you are on that side, just take the advice of the fellow getting a BJ from an old lady - just don't look down -

KR-S · 07-03-2020, 04:24 AM

Quote:

Originally Posted by rosta

thanks for your suggestion. It seems suitable to me.

Not sure if I should feel honored or upset that some spambot has decided to plant a suspicious link in my post.

Kyyuna · 07-03-2020, 07:07 AM

Quote:

Originally Posted by humfrz

Nah, I wouldn't worry about it. When you are on that side, just take the advice of the fellow getting a BJ from an old lady - just don't look down -

If it's working, don't come knocking.

Compelica · 07-03-2020, 12:43 PM

Finally made the decision to get some drivability mods without breaking the bank.

Picked up a 2013 stock header and midpipe for 250 MYR (about 58 USD), gutted the header and sold the contents for 200 MYR (46 USD). The previous owner wanted the midpipe to go as well, so it either goes to the scrap or to another person's hands and I essentially got the header for free.

FWIW I'm retaining the second cat down the line for myself and the environment.

Inside the cat:

Pieces gutted out. Fiber packing removed too (top right).

About 350 grams for the cat contents.

Whoops left a piece out.

Header on block end had some baked carbon in it, so getting a mini flap sander to clear it out first thing tomorrow.

Compelica · 07-03-2020, 01:34 PM

Quote:

Originally Posted by RToyo86

My dash rattle near the speaker has been resolved.
A screw came a bit loose as I suspected.

Thanks for this, got my rattle sorted there too.

Funny though because mine is a 10mm bolt on both sides, and only the passenger side is loose.

EndlessAzure · 07-04-2020, 02:41 AM

Trans Bell Housing Cover, after having almost lost the rubber one a few times.

soundman98 · 07-04-2020, 10:53 AM

Quote:

Originally Posted by EndlessAzure

Trans Bell Housing Cover, after having almost lost the rubber one a few times.

did not know about this. need to check mine is still in place!

DarkSunrise · 07-06-2020, 01:31 AM

Heard the dreaded TOB squeal. Looks like it's time to put in the Exedy stage 1 clutch/lwfw I've been saving for this moment.

07-03-2020, 12:43 PM	#22088
Compelica Senior Member Join Date: Apr 2019 Drives: 86 GT Location: Malaysia Posts: 398 Thanks: 270 Thanked 229 Times in 119 Posts Mentioned: 2 Post(s)	Finally made the decision to get some drivability mods without breaking the bank. Picked up a 2013 stock header and midpipe for 250 MYR (about 58 USD), gutted the header and sold the contents for 200 MYR (46 USD). The previous owner wanted the midpipe to go as well, so it either goes to the scrap or to another person's hands and I essentially got the header for free. FWIW I'm retaining the second cat down the line for myself and the environment. Inside the cat: Pieces gutted out. Fiber packing removed too (top right). About 350 grams for the cat contents. Whoops left a piece out. Header on block end had some baked carbon in it, so getting a mini flap sander to clear it out first thing tomorrow. Last edited by Compelica; 07-03-2020 at 01:37 PM.

07-06-2020, 01:31 AM	#22092
DarkSunrise Senior Member Join Date: Apr 2012 Drives: 22 BRZ (Previously 13 FR-S) Location: USA Posts: 5,798 Thanks: 2,187 Thanked 4,243 Times in 2,221 Posts Mentioned: 48 Post(s)	Heard the dreaded TOB squeal. Looks like it's time to put in the Exedy stage 1 clutch/lwfw I've been saving for this moment. __________________ "Never run out of real estate, traction, and ideas at the same time." 2022 BRZ Build 2013 FR-S Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got My Car Today!!!!! First 86!! #81	Juanito08	Scion FR-S / Toyota 86 GT86 General Forum	7	05-22-2012 04:54 PM
If my FRS was here already, today I would...	bestwheelbase	Scion FR-S / Toyota 86 GT86 General Forum	101	05-12-2012 06:20 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 10:19 PM

06-30-2020, 07:42 PM	#22081
cmorris927 Junior Member Join Date: Jun 2020 Drives: 15 FRS MT Location: CT, USA Posts: 6 Thanks: 0 Thanked 3 Times in 3 Posts Mentioned: 0 Post(s)	Picked up the Subaru trunk lid liner for my FRS today from the local Subaru dealer. Realized upon getting home it didn't come with the clips to install. Does anyone know the part number for the clips? Couldn't find it...

07-02-2020, 09:41 PM	#22084
Kyyuna Member Join Date: Jan 2020 Drives: 2016 FR-S Location: SoCal Posts: 14 Thanks: 4 Thanked 6 Times in 4 Posts Mentioned: 0 Post(s)	Scuffed up my front passenger side bumper trying to reverse out of this really crappy parking in Whittier, when grabbing hotwings. The wings definitely cheered me up tho, I guess another thing to work on with her I suppose.

User Name		Remember Me?
Password