WHAT DID YOU DO TO YOUR BRZ TODAY? - Page 1319 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

MotoX16 · 06-02-2020, 11:56 AM

Installed a GrimmSpeed pulley cover and strut bar, also got a new catch can filter

ItsReiko · 06-02-2020, 01:58 PM

Quote:

Originally Posted by dragoontwo

Got mine for ~$96 shipped from a dealer. Should have seen if my dealer would price match another and got it for $85.

83031CA023

Wow that is quite a bit cheaper than what is found on Ft86speedfactory. Is it the same product? I noticed your product code leads me to information saying it is only compatible with 2018-2020 cars, but I would think nothing has changed in the model years as far as the push button goes. And on ft86speedfactory the item code is SOA31CA023.

Do all the wordings on your button light up as well?

dragoontwo · 06-02-2020, 02:12 PM

Quote:

Originally Posted by ItsReiko

Wow that is quite a bit cheaper than what is found on Ft86speedfactory. Is it the same product? I noticed your product code leads me to information saying it is only compatible with 2018-2020 cars, but I would think nothing has changed in the model years as far as the push button goes. And on ft86speedfactory the item code is SOA31CA023.

Do all the wordings on your button light up as well?

I suspect it should be the same as all models. The words do light up. It looks to me like they replaced the first 3 numbers of the part number I gave with SOA. Ignore the shift knob.....

BA9092 · 06-02-2020, 02:16 PM

Washed it and went for a drive. Then updated my FB cover photo with a new pic.

CBRZY · 06-02-2020, 02:19 PM

Today I took it to a repair shop because I heard a clunking noise while braking at low speeds.
Not the most exciting thing, but it's a thing.

MotoX16 · 06-02-2020, 03:00 PM

Quote:

Originally Posted by BA9092

Washed it and went for a drive. Then updated my FB cover photo with a new pic.

Looks great! What lip kit are you running? Also wondering what spacers youre using on them stock wheels?

BA9092 · 06-02-2020, 03:33 PM

Quote:

Originally Posted by MotoX16

Looks great! What lip kit are you running? Also wondering what spacers youre using on them stock wheels?

Thank you!

I'm running the Bayson R MPX lip and 20mm H&R Trak+ spacers all around.

ItsReiko · 06-02-2020, 03:51 PM

@dragoontwo Thanks. Order placed! Seems like dealership have secondary parts websites that provides lower prices which is different than the estore you find on their official dealer site.

dragoontwo · 06-02-2020, 06:38 PM

Quote:

Originally Posted by ItsReiko

@dragoontwo Thanks. Order placed! Seems like dealership have secondary parts websites that provides lower prices which is different than the estore you find on their official dealer site.

No problem. I always like saving money on legit OEM parts.

Breezio · 06-03-2020, 12:44 AM

First 'major' modification.
Installed HKS Hi-Power Spec L cat-back with carbon fiber (surround) tips.

Stephen W. · 06-03-2020, 11:47 AM

I had the annual Inspection and Maintenance of the Nasiol ZR53 layered ceramic coating done on my BRZ tS. The staff were all just blown away with the condition of the coating and the hydrophobic ability it still had after a full year. Mind you, my car lives in the garage and although nearly two years old has just turned 10K of summer driving. So, it's not like it's seen a lot of bad weather or hard washes.
The one photo shows how it would still bead up after a year. The others are after the maintenance was completed.

NoHaveMSG · 06-03-2020, 12:00 PM

Quote:

Originally Posted by Stephen W.

I had the annual Inspection and Maintenance of the Nasiol ZR53 layered ceramic coating done on my BRZ tS. The staff were all just blown away with the condition of the coating and the hydrophobic ability it still had after a full year. Mind you, my car lives in the garage and although nearly two years old has just turned 10K of summer driving. So, it's not like it's seen a lot of bad weather or hard washes.
The one photo shows how it would still bead up after a year. The others are after the maintenance was completed.

Wish I could keep my car half that nice. I have a hard time washing it on a regular basis.

vintagemxer · 06-03-2020, 07:20 PM

Quote:

Originally Posted by Oublic

Got mine back from PPF and ceramic coating install. Now to push through the remaining break-in miles.

Sent from my Pixel 3 using Tapatalk

Love my CWP with the ceramic coat !!!

dpfarr · 06-04-2020, 12:07 AM

Quote:

Originally Posted by Oublic

Got mine back from PPF and ceramic coating install. Now to push through the remaining break-in miles.

Nice. Where did you take it?

06-02-2020, 11:56 AM	#18453
MotoX16 Senior Member Join Date: Jan 2019 Drives: 2017 Subaru BRZ Location: Minneapolis, MN Posts: 199 Thanks: 62 Thanked 95 Times in 54 Posts Mentioned: 1 Post(s)	Installed a GrimmSpeed pulley cover and strut bar, also got a new catch can filter __________________ 2017 Subaru BRZ PP FBM Turbo Kit: GTX3076R - HRI FlexFuel Tune - 3" Turboback Exhaust - ID1000cc Injectors - Walbro 485 Fuel Pump - FBM Oil Pan - FBM Oil Cooler - Killer B Oil Pickup - FBM Catch Can - FBM Radiator w/Fan Shroud - Clutch Masters FX400 - Verus Clutch Fork/Pivot - IRP Shifter - Cusco Engine/Trans Mounts - RCE Yellow Springs - PS4S 245/40/17

06-03-2020, 12:44 AM	#18462
Breezio Senior Member Join Date: May 2020 Drives: 2017 BRZ series.yellow Location: Idaho Posts: 253 Thanks: 132 Thanked 189 Times in 109 Posts Mentioned: 0 Post(s)	First 'major' modification. Installed HKS Hi-Power Spec L cat-back with carbon fiber (surround) tips. Attached Images

06-03-2020, 11:47 AM	#18463
Stephen W. Senior Member Join Date: Jan 2016 Drives: 1993 Caterham HPC Evo Location: Quinte West Ontario Posts: 1,751 Thanks: 1,656 Thanked 3,001 Times in 1,188 Posts Mentioned: 7 Post(s)	I had the annual Inspection and Maintenance of the Nasiol ZR53 layered ceramic coating done on my BRZ tS. The staff were all just blown away with the condition of the coating and the hydrophobic ability it still had after a full year. Mind you, my car lives in the garage and although nearly two years old has just turned 10K of summer driving. So, it's not like it's seen a lot of bad weather or hard washes. The one photo shows how it would still bead up after a year. The others are after the maintenance was completed. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Saw My First FR-S Today	Marrk	Scion FR-S / Toyota 86 GT86 General Forum	26	05-15-2013 12:40 PM
Got my new FR-S today.	Boosted2.0	Scion FR-S / Toyota 86 GT86 General Forum	51	06-03-2012 10:35 PM
Sat in a FRS today!!	Ladnerd	Scion FR-S / Toyota 86 GT86 General Forum	12	04-30-2012 01:48 PM
Got my VIN today...	Enemies	BRZ First-Gen (2012+) — General Topics	63	04-12-2012 10:19 PM
sat in a BRZ today	NESW20	BRZ First-Gen (2012+) — General Topics	8	03-31-2012 08:53 AM

06-02-2020, 02:16 PM	#18456
BA9092 Captain Slow Join Date: Jun 2018 Drives: '18 BRZ Limited PP 6MT ISM Location: DFW area Posts: 333 Thanks: 388 Thanked 223 Times in 104 Posts Mentioned: 0 Post(s)	Washed it and went for a drive. Then updated my FB cover photo with a new pic.

06-02-2020, 03:51 PM	#18460
ItsReiko Member Join Date: Jan 2020 Drives: 2017 subaru brz Location: Cali Posts: 85 Thanks: 13 Thanked 13 Times in 10 Posts Mentioned: 1 Post(s)	@dragoontwo Thanks. Order placed! Seems like dealership have secondary parts websites that provides lower prices which is different than the estore you find on their official dealer site.

User Name		Remember Me?
Password