Bumper gap fix - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

RToyo86 · 05-31-2020, 02:41 PM

I would grab some OE touch up paint and paint those black clips to match. Much more subtle that way.

Rlkirkland · 05-31-2020, 09:00 PM

Quote:

Originally Posted by RToyo86

I would grab some OE touch up paint and paint those black clips to match. Much more subtle that way.

That's a good idea. That's why I originally got the carbon fiber colored latches. I wanted them to go with the carbon fiber hood. But I will definitely do that. Thanks for the idea.

Sent from my Pixel 4 XL using Tapatalk

Mike_ZN6 · 06-01-2020, 12:12 AM

So what is broken and preventing the bumper from fitting back on correctly? The mounting holes on the bumper or the clips on the headlight brackets?

Rlkirkland · 06-01-2020, 01:33 AM

Quote:

Originally Posted by Mike_ZN6

So what is broken and preventing the bumper from fitting back on correctly? The mounting holes on the bumper or the clips on the headlight brackets?

Idk. I bought a new front bumper to fix it. And it didn't work. So I got new headlight brackets. They also didn't work. I have also changed the plastic push screw under the side markers with a bolt and washer for a tighter fit and it didn't work either lol. When I get the mini clips and the metal Subaru clips in the mail imma take it all back apart and hopefully can get it fixed for good. Went ahead and ordered quick release latches for the hood to as it shakes to much. So hopefully the whole front end will be fixed next week. Yay...

Sent from my Pixel 4 XL using Tapatalk

Mike_ZN6 · 06-01-2020, 09:37 AM

Make sure to post your results. I have a minor gap on mine that I was hoping to fix when I install new headlights in the near future. I was hoping that I might just need to replace the headlight brackets but now I'm worried lol.

Wally86 · 06-01-2020, 09:56 AM

Quote:

Originally Posted by soundman98

There was a group buy way back in 2014 for a kit for those pop tabs. I was in the initial thread. I can't remember the company anymore, but the point is there's a kit for those somewhere here. I don't even remember what they're called enough to begin to search though

https://smile.amazon.com/dp/B07HFXR4W7/

Quick release latches?

NoHaveMSG · 06-01-2020, 06:15 PM

Quote:

Originally Posted by Mike_ZN6

So what is broken and preventing the bumper from fitting back on correctly? The mounting holes on the bumper or the clips on the headlight brackets?

The plastic tabs wear IIRC. So they don't lock together well. You can see in this thread and how they repaired it.

https://www.ft86club.com/forums/showthread.php?t=108535

Mike_ZN6 · 06-01-2020, 06:48 PM

Quote:

Originally Posted by NoHaveMSG

The plastic tabs wear IIRC. So they don't lock together well. You can see in this thread and how they repaired it.

https://www.ft86club.com/forums/showthread.php?t=108535

OP said he got a new bumper and replaced the headlight brackets so I don't understand how that would not fix the gap if the plastic tabs being worn out is the issue.

Rlkirkland · 06-01-2020, 07:53 PM

Quote:

Originally Posted by NoHaveMSG

The plastic tabs wear IIRC. So they don't lock together well. You can see in this thread and how they repaired it.

https://www.ft86club.com/forums/showthread.php?t=108535

I appreciate that link

Sent from my Pixel 4 XL using Tapatalk

Rlkirkland · 06-01-2020, 08:42 PM

Quote:

Originally Posted by Mike_ZN6

Make sure to post your results. I have a minor gap on mine that I was hoping to fix when I install new headlights in the near future. I was hoping that I might just need to replace the headlight brackets but now I'm worried lol.

Alright will do

Sent from my Pixel 4 XL using Tapatalk

soundman98 · 06-01-2020, 11:31 PM

Quote:

Originally Posted by Wally86

https://smile.amazon.com/dp/B07HFXR4W7/

Quick release latches?

pretty much.

here's the specific thread for the car-specific product:
https://www.ft86club.com/forums/showthread.php?t=75057

Rlkirkland · 06-02-2020, 12:11 AM

Quote:

Originally Posted by soundman98

pretty much.

here's the specific thread for the car-specific product:

https://www.ft86club.com/forums/showthread.php?t=75057

Oh yeah I seen that. But I'm hoping to not have to even use them with the metal clips. But I did order two just Incase. And it was much cheaper then 200

Sent from my Pixel 4 XL using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
anyone want a BRZ bumper? --Dark Grey front bumper swap Charlotte NC	IroncladBRX	Southeast	0	04-20-2014 10:18 PM
WTT(Midwest): MY 37j(pearl white) FR-S bumper w/fogs for YOUR BRZ limited bumper	OmarGC	Exterior Parts (Aero, Lighting, Etc.)	26	12-02-2013 12:44 PM
Worn floor mats - Covered under bumper to bumper warranty?	Philly758	Issues \| Warranty \| Recalls / TSB	45	08-19-2013 02:32 PM
Need scratches/scuff marks buffed out of bumper or cheap bumper for sale	[Cyanide]	NY / NJ / CT / PA	12	12-28-2012 08:34 PM

05-31-2020, 02:41 PM	#15
RToyo86 Senior Member Join Date: Mar 2018 Drives: 17 Asphalt 86 Location: Ottawa Posts: 2,385 Thanks: 1,878 Thanked 2,632 Times in 1,286 Posts Mentioned: 16 Post(s) Tagged: 0 Thread(s)	I would grab some OE touch up paint and paint those black clips to match. Much more subtle that way.

06-01-2020, 12:12 AM	#17
Mike_ZN6 Senior Member Join Date: Apr 2020 Drives: 2016 Toyota 86 Location: Orlando Posts: 458 Thanks: 254 Thanked 211 Times in 141 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	So what is broken and preventing the bumper from fitting back on correctly? The mounting holes on the bumper or the clips on the headlight brackets?

06-01-2020, 09:37 AM	#19
Mike_ZN6 Senior Member Join Date: Apr 2020 Drives: 2016 Toyota 86 Location: Orlando Posts: 458 Thanks: 254 Thanked 211 Times in 141 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Make sure to post your results. I have a minor gap on mine that I was hoping to fix when I install new headlights in the near future. I was hoping that I might just need to replace the headlight brackets but now I'm worried lol.

User Name		Remember Me?
Password