Random Thoughts - Part Deux [NO POLITICS]

[bcj]

1/8 inch and whatnot.

Saw 13" riveter and going "Whaa .."

So, rocket bunny then ...

[NoHaveMSG]

Originally Posted by Dadhawk

Airplane kit actually so really plane parts. The Outer wings are the parts you see. The inner wing runs under the fuselage and is what the outer wings connect to.

In the view below the inner and outer wing join where the extra ribs (6-V1-2) are on the mid-left. The extra ribs make up the wing walk. The part that appears flat is the inner wing, the angled up portion is the outer wing.

Are you going to bolt one of those to your car like I did?

[Ultramaroon]

Originally Posted by NoHaveMSG

Are you going to bolt one of those to your car like I did?

Don't say "bolt on" with that drawing! Ho will lose his shit.

[NoHaveMSG]

Originally Posted by Ultramaroon

Don't say "bolt on" with that drawing! Ho will lose his shit.

Whoops. Too late.

[Sapphireho]

Originally Posted by Ultramaroon

Don't say "bolt on" with that drawing! Ho will lose his shit.

.

[p1l0t]

Originally Posted by humfrz

really?

Kenan is the best.

Sent from my SM-G975U using Tapatalk

[Dadhawk]

Originally Posted by Sapphireho

..might be a redneck.

"Is or is not, there is no might.", Yoder...

I Is.

[Dadhawk]

Originally Posted by humfrz

How big is this wing?

The outer wings are @10ft long and 18" thick, it will easily fit out a normal door. All the subassemblies except the fuselage could be finished in the basement and moved. The fuselage would have to be built in my hanger.

Technically, I could get the fuselage out as well, but it would require removing a double window and a wall that is framed for a french door but is closed with sheetrock.

[Dadhawk]

Originally Posted by NoHaveMSG

Are you going to bolt one of those to your car like I did?

No it's too wide for the street. I'd recommend the elevator, vertical rudder is optional.

[ichitaka05]

Work thought it was a good idea to update the system middle of the week... so I can't work til it finishes. Got time to waste, so looking at wire connectors.

Any good wire connector that can be plug in and out. Using it for front bumper, so if/when I take it off the front bumper, I can dislocated it without an issue. Was looking into these style, but was feel not clean.


It's only 2 pin, so was looking into these style as well... but concern of weather/water

[NoHaveMSG]

Originally Posted by ichitaka05

Work thought it was a good idea to update the system middle of the week... so I can't work til it finishes. Got time to waste, so looking at wire connectors.

Any good wire connector that can be plug in and out. Using it for front bumper, so if/when I take it off the front bumper, I can dislocated it without an issue. Was looking into these style, but was feel not clean.

I prefer the spade connectors, then a dab of dialectic grease to help them out. Adhesive lined heat shrink to keep water out of the backside of the connector.

[Tcoat]

Originally Posted by ichitaka05

Work thought it was a good idea to update the system middle of the week... so I can't work til it finishes. Got time to waste, so looking at wire connectors.

Any good wire connector that can be plug in and out. Using it for front bumper, so if/when I take it off the front bumper, I can dislocated it without an issue. Was looking into these style, but was feel not clean.


It's only 2 pin, so was looking into these style as well... but concern of weather/water

Can't beat these. I use them in my boat.





https://store.valueaccessories.net/2...ectorPlug.aspx

[ichitaka05]

Originally Posted by Tcoat

Can't beat these. I use them in my boat.





https://store.valueaccessories.net/2...ectorPlug.aspx

Thanks!

In the boat? Then def itll be waterproof rough for my car!

[Dadhawk]

Originally Posted by Tcoat

Can't beat these. I use them in my boat.

I used these when I upgraded the headlights on my Suburban. Worked very well.