WHAT DID YOU DO TO YOUR BRZ TODAY?

[soundman98]

if i can find them again. i looked very quickly at one of my car parts shelf and didn't find them right away. it'll require more digging. but if i do find them you can have them for the cost of shipping.

this was the first car, the second was the same pod, just with blue leds... i was still mourning when the second replaced it, so never got pictures before i took them out.

[HaXx]

Originally Posted by soundman98

if i can find them again. i looked very quickly at one of my car parts shelf and didn't find them right away. it'll require more digging. but if i do find them you can have them for the cost of shipping.

this was the first car, the second was the same pod, just with blue leds... i was still mourning when the second replaced it, so never got pictures before i took them out.

yeah, i like the interior footwell lighting a lot, its just if i pulled the trigger on EVERYTHING i wanted to do to the car, id be $30,000 in credit card debt haha! so if you fend them, id be happy to get first grabs. I did just get a sponsorship with Braum seats, and i got all blue reclineables, so i was looking into blue footwell lighting.. (and a black w/ blue stitching steering wheel) haha

[HaXx]

Originally Posted by BA9092

I spent less than $50 on the footwell lighting - just a kit from Amazon.

Also, the carbon fiber/leather/perforated leather steering wheel from East End Raceshop was $310 shipped.

i did not know of that wheel... and i like it a lot...

[JD001]

Had enough of the car sitting there forlorn.. put the battery back in and took it out for a drive. It was first or second week of March when I last drove her!!

It was a nice guilty pleasure, roads empty.. Even got a tiny bit of the motorway (M25).. The M25 is a major highway that circumnavigates London, it was empty.. it's so surreal!

[aKaGorganZola]

Got to finally install my verus engineering AOS with the drain back and coolant kits for it. And a few days ago I dropped the tranny and diff oils and put in motul 300. Steadily crossing off my supporting mod list before I order my Edelbrock kit!

[soundman98]

it was too nice outside not to be doing something.

so i changed the oil on the car and truck--both of which got a fumoto valve FINALLY. and i added the 86speed hood struts i've had since that super-sale last year...

[grumpysnapper]

I decided to change to lithium from a Braille 904, and try to clean up the wiring while adding an isolator.
Decided on a Lithiumax at about half the weight of the 904 at 2.5kg, and with 48 AH... for about the same replacement cost.

(and please excuse the temporary velcro wrapping on the right of picture)

[BirdTRD]

Originally Posted by grumpysnapper

I decided to change to lithium from a Braille 904, and try to clean up the wiring while adding an isolator.
Decided on a Lithiumax at about half the weight of the 904 at 2.5kg, and with 48 AH... for about the same replacement cost.

(and please excuse the temporary velcro wrapping on the right of picture)

Nice work!

[Guru Woodman]

I replaced the rear rotors and pads with a set of Stoptechs.
The fronts were done last year.
I used this kit from FT86Motorsports. I can highly recommend these guys. Shipping was surprisingly quick.

I still have to replace the lines with the supplied stainless ones but I am waiting on an Amazon bleeder kit and I obviously could not wait any longer. As you can see, they were long overdue.

[notmyracecar]

Changed all the bulbs in the car to LEDs as well as buying new gaskets for my leaky exhaust before realizing my jack won’t fit under the car enough to raise it since I lowered it 1.5 inch all around, debating between making some wood low car ramps or just buying a new jack, it’s about that time anyway lol

[Busybee]

Originally Posted by soundman98

it was too nice outside not to be doing something.

so i changed the oil on the car and truck--both of which got a fumoto valve FINALLY. and i added the 86speed hood struts i've had since that super-sale last year...

Do you mind sharing Which cat#of the Fumoto Valve you installed?

Thanks


Sent from my iPhone using Tapatalk

[soundman98]

Originally Posted by Busybee

Do you mind sharing Which cat#of the Fumoto Valve you installed?

Thanks


Sent from my iPhone using Tapatalk

it's the F-108S

so i can use the F-hose and SH-10 socket to drain into things more predicably.

[Breadman]

i did a bunch of stuff but the only video i've made is installing my sti engine mounts

2 more videos to come soon

[BlueWhelan]

Took the new pup out for a ride! Brz passed the doggo test! Follow Cj_the_collie on Instagram if anyone’s interested!




Sent from my iPhone using Tapatalk