Is there such a thing as a quiet full Titanium exhaust?

[biggie]

Hi,

My setup: Tomei UEL + stock OP & FP + Q300

This setup used to sound amazing (to my ears) when I first installed the Q300 but "broke" after the first track day (sound deadening material inside the muffler burned away).

I'm looking now to change it and since I would like to shed some weight as well a titanium exhaust seems like a good choice.

However, I want to keep sound levels as low as possible (Q300 level...give or take few db) and the new exhaust must have dual exit.

I was thinking at JDL ultra quiet FP + FactionFab CB but I have no idea if the FP is actually quieter than the stock one, or how FactionFab compares as volume levels with Q300.

Also, there is Tomei CB with dual exit on the market now (and some other very expensive stuff), but I could not find much info about it.

What do you guys think?

[Joveen]

I think you can.

Sent from my SM-N960U using Tapatalk

[DarkPira7e]

The factionfab exhaust just uses 2 straight through mufflers. Any other dual exhaust like this would be comparable sound-wise. It will not be very quiet like an exhaust that has a chambered muffler system.

I have no idea about the front pipe, I don't think anything gets quieter than stock. In-line mufflers exist, but likely wouldn't do a whole lot if they're up in the front pipe anyway; just keep the stock frontpipe

[Goingnowherefast]

Originally Posted by DarkPira7e

I have no idea about the front pipe, I don't think anything gets quieter than stock. In-line mufflers exist, but likely wouldn't do a whole lot if they're up in the front pipe anyway; just keep the stock frontpipe

This. From someone who's tried damn near every front pipe out there, trust me, just keep it stock.

[StraightOuttaCanadaEh]

Does Invidia not offer a replacement muffler for the Q300? Would you be able to contact them and tell them about the problem? They must have some kind of warranty

[biggie]

Originally Posted by StraightOuttaCanadaEh

Does Invidia not offer a replacement muffler for the Q300? Would you be able to contact them and tell them about the problem? They must have some kind of warranty

Bought it from states, shipped to Romania (for a lot of money). Sending it back it's simply not worth it

[biggie]

Originally Posted by Goingnowherefast

This. From someone who's tried damn near every front pipe out there, trust me, just keep it stock.

I was thinking the same, thanks for the confirmation!

How loud is the HKS CB you have? So far I heard for myself MXP Comp RS (VERY loud) and my Q300, so a comparison with any of those will help. Also, did you had any issues on the track with it?

I'm interested in this version as an alternative for titanium options.

[StraightOuttaCanadaEh]

Originally Posted by biggie

Bought it from states, shipped to Romania (for a lot of money). Sending it back it's simply not worth it

I meant just get a replacement part

[mrg666]

Originally Posted by biggie

I was thinking the same, thanks for the confirmation!

How loud is the HKS CB you have? So far I heard for myself MXP Comp RS (VERY loud) and my Q300, so a comparison with any of those will help. Also, did you had any issues on the track with it?

I'm interested in this version as an alternative for titanium options.

HKS HiPower SpecL is very light, louder than Q300 but quieter than N1 due to dual resonators. And it has very good flow being a straight through design, even better flow with HKS dual resonator front pipe. I have had those with stock header on my FR-S in the last two years.

[toast]

There are a ton of more effective ways to lose weight than with a cat back exhaust since it is so low on the car. I would put the stock exhaust on if I wanted quiet. Unless you are turbo you don't need the flow.

[RayRay88]

Titanium, lightweight, dual exhaust and quiet.

You're going to have a tough time finding a prefab exhaust that meets these requirements. Your best bet is to get a very reputable shop to fabricate something for you. This is going to cost a pretty penny.

[deca]

I don't know that you're going to lose a meaningful amount of weight without going to a single exit, and I doubt you're going to find a single exit as quiet as you'd like.

I definitely wouldn't change the frontpipe, everything I've ever seen tells me that the stock FP is the quietest option by far.

[RayRay88]

There is a prevailing theory that the Fujitsubo dual resonated front pipe is, at worst as quiet as the stock fp, if not slightly quieter.

https://www.ft86club.com/forums/showthread.php?t=101471

[solidONE]

How about just some Ti mufflers to replace your worn out Q300 glass packs? There are much more effective and cheaper ways to reduce weight than a full Ti pipe. Only thing does better besides weight is the 'bling' value. Custom exhaust with some nice mufflers is a good compromise. Polish the old pipe up and youre stylin with some titanium bling and sound similar to a brand new Q300.


Man these things aren't cheap are they? lol https://www.amazon.com/Vibrant-Perfo.../dp/B0774V6DTM

HKS Bling:

May want to see if you can find some oval ones for more sound deadening effect. Also a riveted on tube body so you can repack them later on or try different packing materials.