SOCAL: Local FS/FT

[MinesWave]

Parting out car

ARK GRiP Catback Exhaust - 600
Buddy Club Racing Spec EL headers 500
Greddy Carbon Fiber Air Inlet - 250
New Tomei Overpipe with heatwrap and bolts and nuts - 180










Sent from my iPhone using Tapatalk

[scottxnizzle]

Just parted ways with my BRZ, I have new and used parts for sale

Shoot me a PM for price and questions!

New:
$250 REXPEED Carbon Fiber STI Style Front Lip/Splitter (2013-2016 BRZ)
$140 Toyota OEM GT86 LHD Arm Rest

Used:
$40 Rays Wheels 35mm 12x1.25 Lug Nuts (Blue)

Please take my stuff! Meet in San Diego Area!

[Jordan Silveira]

Greetings FR-S/BRZ/86 brothers and sisters, I'm surveying potential interest for this super rare Greddy Performance Individual Throttle Bodies (ITB) kit for the Subaru BRZ/Scion FR-S/Toyota 86 platforms. It's meant to be a plug and play kit with the supplied manifold but I am also including a set of velocity stacks (trumpets) and UNI filters with the stacks. I am also including the OEM throttle body that's needed so you don't have to sacrifice your own. This by far is the most complete version of the kit you'll ever see. Greddy sells this kit without the throttle body, filters, and stacks, for $3,000. This is a rare find and makes any of the above platforms a one of a kind. Thank you for your time and message me if interested. Kind regards!

[Jordan Silveira]

Hello FRS/BRZ/GT86 Marketplace, I am selling a very rare and very limited front lip from the FR-S Release Series 2.0 and also the accompanying rear decklid spoiler from the Release Series 2.0 Naturally, the rear decklid spoiler is painted Lunar Storm but is in great condition just needs new double sided tape. There are two bolts that are meant to screw into your trunk but I'm sure you could avoid this by shaving them down and using a liberal amount of double sided tape. As with all limited edition/release series parts, they are more rare, limited, and as such more expensive. I'm unsure what the dealerships charge for this but it would be VIN locked either way. Make me an offer. Worst I can say is NO. Thank you for your time and I hope your BRZ/86/FR-S is treating you well!

[KungFuWaffle]

WTS: I have a set of OEM 2017 86 wheels with about 70% life on the tires with no curb rash.

[JCW 86]

For Sale: Scion FRS Stock OEM headlights - $200
Perfect for anyone trying to go back to stock so they can sell their car. Local pickup only, located in the Pasadena area

[beltax90]

maxton design v2 rear spats

paid 130 for these from ftspeedfactory, dont think they're worth that much but just want these gone. nothing wrong with them just change in direction in style for me.

easy to install. and look great. some scratches from rubbing from mounting but you wont see it from the outside. you'll need to buy the 4 clips to mount them.

$20

[89_Manny]

WTB

2013-2016 Firestorm C7P front bumper.PM with photos and asking price. please and thank you


Sent from my iPhone using Tapatalk

[Decimus]

Used Subaru trunk mat $50
Used K&N Air Filter 33-2300 $25



Used SPL rear lower control arms -$old
Used front crash beam- $old

Picked up SGV/626/Los Angeles

[just_frs]

Selling Perrin 3 inch resonated exhaust. Usual scratch and things from lowering. Missing 1 shaft collar and maybe the two front bolt if I can't find it lol. Dm for more pictures


Looking for $550 or trade for Perrin 2.5 resonated or greddy so supreme. Located in San Gabriel.


Sent from my SM-G970U using Tapatalk

[Thunder86]

Originally Posted by Thunder86

WTS Work M.C.O. Racing Type CS 18x8.5 +38 (comes in Work “Blood Red”)

Wheels are wrapped in 245/35/18 Continental ExtremeContact DWS06

Set up will come with: OEM TPMS, Work license plate frames (2), Work M.C.O. wheel decal/sticker sheet, and a set of Kyo-ei Bull Lock Tuskey lug locks

Wheels were fully ceramic coated right out of the box. Wheels & tires have about 16k miles on them. Condition is 8/10 due to daily driving rash, however, they have never been curbed, tracked, autocrossed, etc.

Ran these with stock struts + TRD springs with -1.7 camber front and -1.5 camber rear... had ZERO rubbing issues and fitment is flush!

Links: https://www.ft86speedfactory.com/wor...l#.XgxZNySIaEc ... https://m.tirerack.com/tires/tires.j...06XL&tab=Sizes

This setup would cost about $2800 new. Would like to sell full kit for $1800 obo.

Local pick-up only for now.

Bump.

[MJones_RB]

Originally Posted by Decimus

For sale: SPL Rear Lower Control Arms. Will include new grade 10 hardware (locking nuts & flanged bolts). $425 picked up in LA. Price is firm.

That BSK020 kit is a great deal! Where was it a month ago?

[Jordan Silveira]

Originally Posted by Jordan Silveira

Greetings FR-S/BRZ/86 brothers and sisters, I'm surveying potential interest for this super rare Greddy Performance Individual Throttle Bodies (ITB) kit for the Subaru BRZ/Scion FR-S/Toyota 86 platforms. It's meant to be a plug and play kit with the supplied manifold but I am also including a set of velocity stacks (trumpets) and UNI filters with the stacks. I am also including the OEM throttle body that's needed so you don't have to sacrifice your own. This by far is the most complete version of the kit you'll ever see. Greddy sells this kit without the throttle body, filters, and stacks, for $3,000. This is a rare find and makes any of the above platforms a one of a kind. Thank you for your time and message me if interested. Kind regards!

BUMP

[beltax90]

Originally Posted by beltax90

maxton design v2 rear spats

paid 130 for these from ftspeedfactory, dont think they're worth that much but just want these gone. nothing wrong with them just change in direction in style for me.

easy to install. and look great. some scratches from rubbing from mounting but you wont see it from the outside. you'll need to buy the 4 clips to mount them.

$20. san diego. pick up only.

for reference:

https://www.ft86speedfactory.com/max...l#.Xjkp747YrnE

Also am trying to get rid of this OLM cf cover for the dash that I also got through ft86speedfactory. the fit for this is ok. youd prob be better off vinyl wrapping the dash pieces in fake cf. the piece that goes around the radio, the beginning of the cf piece i feel like should meet the end of the gauge cluster trim but it doesnt. was disappointed that it doesnt cover the whole first piece of the dash (6th pic).

the second passenger piece fits fine. theres a small surface scratch in the bottom right corner of this piece (7th pic).

you'll have to replace the double side tape to mount both pieces. i couldnt get the pieces to sit flat on the oem dash surface, would prob need thicker tape maybe? like the edges stuck ok but the areas in the middle, you can push them in with your finger....

also according to ftspeedfactory this will not fit with 16-17 brzs with starlink radio

20 bucks for this too.

https://www.ft86speedfactory.com/olm...trim-2027.html

willing to trade both of these for some 17+ brz/86 foglamps. will also throw in bnib cf ebrake handle (black)

https://www.ft86speedfactory.com/car...crosstrek.html

BUMPER HAS BEEN SOLD. Thanks

Bumparooskis