WHAT DID YOU DO TO YOUR BRZ TODAY?

[edwardl]

Originally Posted by Busybee

That was the initial plan. The module has the - (ground) and + (fuse tap with 10A fuse includes- not sure which fuse to use, maybe the p/pin1 or 2 which are the cigarette lighters). But in addition to those two wires there is also an auxiliary wire which is for custom color door opening.
I tried to wire it to the door light trigger but it did not light up when opening the door. I was little scared to short the system so I decided not to wire it. What I want is that the auxiliary wiring gets activated like the dome light when you get closer to the car with the key fob.

The footwell illumination with the cigarette lighter turns on only when the engine is on. Ideally the whole system should be activated with the dome light and change the custom color when the door is opened.

Will definitely search and finalize a hardwire.

Thanks


Sent from my iPhone using Tapatalk

I still haven't hooked up my auxiliary wire. I tried to tap it into the dome light but all it did was short out my bulb lol. I may try to get another fuse tap and find the dome light fuse for that.



Anyway here's where I have the fuse tap. It's the unlabeled spot next to the tail light fuse.
They only turn on when the car is on. Only thing is when you put the fuse tap in, you can no longer put the fuse box cover back on. I just keep it in the glove box.



Here's the video I mentioned that shows where to ground it.
[ame]https://www.youtube.com/watch?v=MS4TBKhM1u8[/ame]

[Busybee]

Originally Posted by edwardl

I still haven't hooked up my auxiliary wire. I tried to tap it into the dome light but all it did was short out my bulb lol. I may try to get another fuse tap and find the dome light fuse for that.



Anyway here's where I have the fuse tap. It's the unlabeled spot next to the tail light fuse.
They only turn on when the car is on. Only thing is when you put the fuse tap in, you can no longer put the fuse box cover back on. I just keep it in the glove box.



Here's the video I mentioned that shows where to ground it.

Thanks for the extra information. I wired my radar and camera with fuse taps so the cover is already in the glove box

Never thought about an unlabeled fuse slot (Tbh I did not know whether they are just + getting activated with the engine start). Good to know!
Do you think that the dome light is the only option to get the system activated before you start you car?
Would be nice to to have the system light up when the dome light is on.

Thanks


Sent from my iPhone using Tapatalk

[HaXx]

Originally Posted by Busybee

Thanks for the extra information. I wired my radar and camera with fuse taps so the cover is already in the glove box

Never thought about an unlabeled fuse slot (Tbh I did not know whether they are just + getting activated with the engine start). Good to know!
Do you think that the dome light is the only option to get the system activated before you start you car?
Would be nice to to have the system light up when the dome light is on.

Thanks


Sent from my iPhone using Tapatalk

That would be smooth, open your door at night and the dome light and your 8nterior lighting comes on.

[norcalpb]

Sanded/buffed my headlights. They were looking pretty crap after 6.5 years.

[Cjymiller]

Originally Posted by norcalpb

Sanded/buffed my headlights. They were looking pretty crap after 6.5 years.

Same here! I picked up the $9 turtle wax kit and it fully met expectations!

[edwardl]

Seibon CSL carbon fiber trunk. Still not sure if I like it.

[Will BRZ]

Originally Posted by edwardl

Seibon CSL carbon fiber trunk. Still not sure if I like it.

Damn that’s beautiful

[JD001]

Originally Posted by edwardl

Seibon CSL carbon fiber trunk. Still not sure if I like it.

The carbon trunk is very nice, however, IMHO the car ride height needs to be tweaked so that the truck is visually balanced and why not swap the hood?

[MJones_RB]

Originally Posted by norcalpb

Sanded/buffed my headlights. They were looking pretty crap after 6.5 years.

I did the same thing, sadly it's a temporary fix. Once you sand off that factory clear coat, they are always going to haze up again. You can try adding some film protection on top after you buff them, that might help.

[MilkyWitness]

asdf

[Chikna]

I was driving on Hwy 290 (Houston) and I hit an object not sure what it was could be a metal and in fraction of a second I had a flat tire. I could barely drive 300 ft and I had to stop in the shoulder. Luckily, there was a tow truck and drove me home (just under 5 miles) took $125 for a flat bed price I guess. He inspected the tire and it had a slit on the front left side, he also said there was no damage to the car except the tire.

Question is does Subaru replaces the tire since the car is just a year old?

[Decep]

Originally Posted by MJones_RB

I did the same thing, sadly it's a temporary fix. Once you sand off that factory clear coat, they are always going to haze up again. You can try adding some film protection on top after you buff them, that might help.

i bought some 3m clearcoat wipes that come with a sanding disc that worked really well and was super easy to apply. highly recommended and only like 5 bucks

[Kiske]

Originally Posted by Chikna

Question is does Subaru replaces the tire since the car is just a year old?

Not for free

[thomasmryan]

midnight dragon in the moonlight.


the new section of foothills parkway is quite stellar