Spoilers that cover the BRZ Limited spoiler holes - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Irace86.2.0 · 10-23-2019, 10:15 PM

Quote:

Originally Posted by solidsnake11

https://www.ebay.com/itm/For-Toyota-...72.m2749.l2649

I bought this one, its very nice, fits great, and it is not hollow on the bottom. Covers all the holes on 13 limited.
I drilled the two back holes on each side in the bottom of the spoiler and epoxied bolts in to help the double sided tape hold it on. Went to drill the front but the spoiler is to thin for the front bolts.

I do like that style, as the lines work well with the rear fender garnish. I don’t know if I would get carbon fiver or fiberglass because I would likely paint either one. What about weatherstripping? Did it come with any? I too was considering attaching screws to any spoilers that didn’t have screws.

Irace86.2.0 · 10-24-2019, 01:34 PM

https://rover.ebay.com/rover/0/0/0?m...2F291675095558

This one kind of looks like the Five:AD Axis one. I know the Five:AD one doesn’t cover the holes, so this one probably doesn’t. The wife has approved this or the TRD sized ones. Duckbills and Rocketbunny sized ones are out, she says.

I contacted the seller, asking if it covers the stock holes. They said the spoiler was a replacement, so they did but didn’t answer the question. I’m not comfortable getting it not knowing.

Irace86.2.0 · 10-24-2019, 09:20 PM

Oh yea, i know that would be bad.

Irace86.2.0 · 10-25-2019, 12:21 PM

I decided to buy the authentic TRD spoiler, so I could get it in D4S, and so it would have the best fitment, guaranteed to cover the stock holes and has a weather seal. I looked at integrated trunk lips, but unless every aero mode is integrated then it looks out of place; in that aspect, the TRD matches other add-ons like my side skirts, the stock spoiler and my front lip. Plus, I have the Toyota-in-the-back/Subaru-in-the-front thing going on with the T3Q emblem, so this will match. Yea.

gpvecchi · 10-25-2019, 05:33 PM

Genuine TRD doesn't cover the 2017 holes... I had to weld mines.

Irace86.2.0 · 10-25-2019, 06:30 PM

Quote:

Originally Posted by gpvecchi

Genuine TRD doesn't cover the 2017 holes... I had to weld mines.

Good to know. I have a 2013.

10-24-2019, 01:34 PM	#16
Irace86.2.0 Senior Member Join Date: Mar 2017 Drives: Q5 + BRZ + M796 Location: Santa Rosa, CA Posts: 7,884 Thanks: 5,668 Thanked 5,810 Times in 3,300 Posts Mentioned: 70 Post(s)	https://rover.ebay.com/rover/0/0/0?m...2F291675095558 This one kind of looks like the Five:AD Axis one. I know the Five:AD one doesn’t cover the holes, so this one probably doesn’t. The wife has approved this or the TRD sized ones. Duckbills and Rocketbunny sized ones are out, she says. I contacted the seller, asking if it covers the stock holes. They said the spoiler was a replacement, so they did but didn’t answer the question. I’m not comfortable getting it not knowing. __________________ My Build \| K24 Turbo Swap \| K24T BRZ SOLD

10-24-2019, 09:20 PM	#17
Irace86.2.0 Senior Member Join Date: Mar 2017 Drives: Q5 + BRZ + M796 Location: Santa Rosa, CA Posts: 7,884 Thanks: 5,668 Thanked 5,810 Times in 3,300 Posts Mentioned: 70 Post(s)	Oh yea, i know that would be bad. __________________ My Build \| K24 Turbo Swap \| K24T BRZ SOLD

10-25-2019, 12:21 PM	#18
Irace86.2.0 Senior Member Join Date: Mar 2017 Drives: Q5 + BRZ + M796 Location: Santa Rosa, CA Posts: 7,884 Thanks: 5,668 Thanked 5,810 Times in 3,300 Posts Mentioned: 70 Post(s)	I decided to buy the authentic TRD spoiler, so I could get it in D4S, and so it would have the best fitment, guaranteed to cover the stock holes and has a weather seal. I looked at integrated trunk lips, but unless every aero mode is integrated then it looks out of place; in that aspect, the TRD matches other add-ons like my side skirts, the stock spoiler and my front lip. Plus, I have the Toyota-in-the-back/Subaru-in-the-front thing going on with the T3Q emblem, so this will match. Yea. __________________ My Build \| K24 Turbo Swap \| K24T BRZ SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Will the BRZ/GT86/86 Factory Spoiler fit in the Factory FR-S Spoiler mounting holes?	jbsali	Cosmetic Modification (Interior/Exterior/Lighting)	1	02-13-2014 08:45 PM
BRZ lip spoiler to cover OEM holes	J-W	Cosmetic Modification (Interior/Exterior/Lighting)	3	12-05-2013 08:56 AM
FS: BRZ Limited Spoiler	illusions760	Exterior Parts (Aero, Lighting, Etc.)	2	11-07-2013 02:35 AM
WTB: BRZ Limited visor cover	1stGenBRZ86	Want-To-Buy Requests	2	08-09-2013 12:55 AM
Would a 5AD trunk lip cover up all the holes left by a BRZ Limited wing?	tracerit	Cosmetic Modification (Interior/Exterior/Lighting)	14	06-13-2013 07:27 PM

10-25-2019, 05:33 PM	#19
gpvecchi Senior Member Join Date: Mar 2018 Drives: Toyota 86 GT Limited PP (Model G) Location: Italy Posts: 1,052 Thanks: 414 Thanked 359 Times in 202 Posts Mentioned: 14 Post(s)	Genuine TRD doesn't cover the 2017 holes... I had to weld mines.

User Name		Remember Me?
Password