Corsa cat back owners

[RToyo86]

Originally Posted by can't stop spinning

You'll have to turn up the volume. The video was taken with my goggle cam, and while great for capturing vids on my sled or quad, turned out real quiet in the car.

Car has a TRD cai, OFT and OFH and Corsa Catback. Definitely has that boxer rumble now.

I can get one of these headers from somebody locally for $500CAD which is a steal. I'm just afraid I will sound to obnoxious while cruising around town.

Has anybody heard this setup in person?

[Alberto_HTX]

For anyone interest here's a clip of my frs with its full exhaust set up. Th GoPro did a decent job capturing the sound.
Set up is:
- JDL Catted UEL
- Tanabe Overpipe
- Hooker Blackheart Catles frontpipe
- Corsa Catback

[StraightOuttaCanadaEh]

Originally Posted by Alberto_HTX

For anyone interest here's a clip of my frs with its full exhaust set up. Th GoPro did a decent job capturing the sound.
Set up is:
- JDL Catted UEL
- Tanabe Overpipe
- Hooker Blackheart Catles frontpipe
- Corsa Catback

that's quite raspy and flatulent. Did you install all of the exhaust upgrades at the same time, or bit by bit? I'm betting it's the overpipe and/or front pipe that are responsible for the rasp but thought I'd ask in case you installed them one at a time and were able to pinpoint the one that caused all the rasp.

[AllThePeat]

Only have a cold start video right now...

Invidia Catless/Resonated Front Pipe and Corsa Catback

[RToyo86]

Originally Posted by StraightOuttaCanadaEh

that's quite raspy and flatulent. Did you install all of the exhaust upgrades at the same time, or bit by bit? I'm betting it's the overpipe and/or front pipe that are responsible for the rasp but thought I'd ask in case you installed them one at a time and were able to pinpoint the one that caused all the rasp.

That front pipe is probably to blame.
Here is the same header, with the stock frontpipe/over pipe.
[ame]https://www.youtube.com/watch?v=JOiPDQWjqqo[/ame]

[RToyo86]

FT86SF catted setup seems to retain some corsa noise, but with a nice rumble down low.

[ame]https://www.youtube.com/watch?v=1nxmBd9xFjs[/ame]

same car /watch?v=h1B3q5qk2LU


Skip to 0:28 for outside WOT sound
[ame]https://www.youtube.com/watch?v=_I6qAE2yDuc[/ame]

[StraightOuttaCanadaEh]

Originally Posted by RToyo86

FT86SF catted setup seems to retain some corsa noise, but with a nice rumble down low.

same car /watch?v=h1B3q5qk2LU


Skip to 0:28 for outside WOT sound

it's a tough call... not sure if the car above has a FP/OP but it sounds a bit different.

Listen to this video of a FT86SF header with a Corsa and I dont know if that's just the quality of whatever they used to record it or what, but it sounds phenomenal and what I want my car to sound like

[ame="http://www.youtube.com/watch?v=B93PkCAWpIE"]http://www.youtube.com/watch?v=B93PkCAWpIE[/ame]

[RToyo86]

Originally Posted by StraightOuttaCanadaEh

it's a tough call... not sure if the car above has a FP/OP but it sounds a bit different.

Listen to this video of a FT86SF header with a Corsa and I dont know if that's just the quality of whatever they used to record it or what, but it sounds phenomenal and what I want my car to sound like

I think it's the audio quality honestly. That video is what solidified me getting this header once I'm out of warranty.
I can deal with the slight difference in power gains from Catted for the noise and less stink.

[wolffbite]

So I just bought one used but did not get the bolts with it.

Anyone know what size bolts to use for the midpipe to frontpipe connection?

[Vital]

Originally Posted by wolffbite

So I just bought one used but did not get the bolts with it.

Anyone know what size bolts to use for the midpipe to frontpipe connection?

I believe you need 14mm bolts