Tein EDFC Motor Thread Diameter & Pitch?

[EndlessAzure]

Would anyone know what the Tein EDFC Motor Interface Thread Diameter & Pitch are on the Tein Flex A damper rods (REAR pair)? The matching motor kit is the M12-M14.

For example, see where the following image is indicating to apply threadlocker (though this is for the front pair, source thread):


I want to buy some threaded stand-offs so that loose luggage or boxes that I carry in the back don't bump the dampener settings.

[banane63]

Originally Posted by EndlessAzure

Would anyone know what the Tein EDFC Motor Interface Thread Diameter & Pitch are on the Tein Flex A damper rods (REAR pair)? The matching motor kit is the M12-M14.

For example, see where the following image is indicating to apply threadlocker (though this is for the front pair, source thread):


I want to buy some threaded stand-offs so that loose luggage or boxes that I carry in the back don't bump the dampener settings.

I put 2 aluminum U with Parker screws around the motors to avoid to break them with luggages...

Envoyé de mon S60 en utilisant Tapatalk

[EndlessAzure]

Finally got around to just buying random hardware.


The rears are: M12x1.25, per JIS (coincidentally, same as our lug nuts)